[driverloader] Assistance, please . . . . .

[Linuxant support]

Hi,

the adapter is there in the output from "lspci".

---
00:0a.0 Network controller: Broadcom Corporation BCM4301 802.11b (rev 02)
 Subsystem: Linksys: Unknown device 4301
-
00:0a.0 Class 0280: 14e4:4301 (rev 02)
 Subsystem: 1737:4301
---


I think you have compiled your kernel without the "CONFIG_MODULE_UNLOAD=y"
option because of this message...

---
+ dldrstop
FATAL: Kernel does not have unload support.
---

This can probably cause problems.

Also, you don't seem to have uploaded the Windows XP driver for your adapter
through
the web configurator.

Please run "dldrconfig --info" and then access http://127.0.0.1:18020/ to
upload the driver files. You can take a look at the question "Where/How to
find the required Windows XP driver files?" in the FAQ for more details.

http://www.linuxant.com/driverloader/wlan/faq.php

You will find the installation instructions at this address:

http://www.linuxant.com/driverloader/wlan/install.php

Regards,

Jean-Simon Durand
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com


----- Original Message ----- 
From: "Pat Walker" <skywalker01 at comcast.net>
To: <driverloader at lists.linuxant.com>
Sent: Wednesday, December 03, 2003 1:55 AM
Subject: [driverloader] Assistance, please . . . . .


All -
Have been anxiously reading the archives for some hint of the problem
that I am seeing.   Can anyone please give me a hand?  I have *BOTH*
NetGear WG311 and Linksys WMP11 (Broadcomm Firmware), and cannot get
either of them to be recognized by the system.  It appears as being seen
by the BIOS, but the driver appears to be turning a blind eye to my
wireless cards.  Any assistance would be greatly appreciated!!