[driverloader] some help with Dell Wireless Card

[Charles Love]

I was working with support through email, but have not heard back from
support.. Perhaps someone on the list can help me.. Heres where we left
off..

Thanks if someone can help me get it working :)

---

I dual boot my system with WINXP and SuSE9 and Wireless works ok through
windows. Its an internal card so theres no antenna or anything..

I did a "dldrconfig --dumpdiag" and its attached..

I did as you requested but still dont see anything different.. is there
anything I can try? perhaps you see something different in the attached
file..

--Charles

On Mon, 2003-12-22 at 06:33, Linuxant support wrote:
> Hi,
> 
> we don't see your AP with the command "iwlist scan".
> 
> Do you need to press on a button to activate the antenna? Make sure
your
> card works under Windows. Also veriry that it is not disabled in your
BIOS
> options.
> 
> You might need to upgrade your Windows XP driver. You should try with
the
> latest NDIS driver from Belkin. They usually provides the most recent
one
> for adapters with a Broadcom chipset. You can download it from the
following
> link.
> 
>
http://web.belkin.com/support/download/download.asp?download=F5D7000〈=1&mode=
> 
> When you uncompress the ".exe" file with "unzip", "unrar" or "winzip",
the
> driver files will be in "program files/Belkin/Belkin 54Mbps Wireless
> Utility/Driver".
> 
> Before uploading the INF file (bcmwl5.ntf) through the web interface,
you
> must edit it to add your PCI ID under "[BROADCOM]" near the top.
> 
> Since your card's PCI ID is "14e4:4301" and the sub PCI ID is
"1028:0407",
> you need to add the following line.
> 
> ---
> %BCM430G_DeviceDesc% = BCM43XG, PCI\VEN_14E4&DEV_4301&SUBSYS_04071028
> ---
> 
> Regards,
> 
> Jean-Simon Durand
> Technical specialist / Linuxant
> www.linuxant.com
> support at linuxant.com
> 
> 
> ----- Original Message ----- 
> From: "Charles Love" <charles at tntscg.com>
> To: <support at linuxant.com>
> Sent: Sunday, December 21, 2003 3:43 PM
> Subject: QUestion For You - Looking to BUY, need to get it to work 1st
> 
> 
> Hi.. I have installed the License and Drivers and such.. But cant seem
> to use it.. I am sure its me.. Could you point me where I should go? I
> have SuSE 9.0 and installed your app just fine. IWconfig shows the
card.
> And the KWiFiManager App shows I have a Full Signal.. Its Not
assigning
> me an IP Address via DHCP Though..
> 
> once I get that working I should be all right :) Attached is my file
as
> requested on your site..
> 
> Thanks for your help :) I look forward to finally getting my wireless
up
> on my laptop :)
> 
> Im looking to purchace. But need it to work 1st
> 
> 
> 


-- 


Thanks Again!
Charles Love


________________________________________________________________________