[driverloader] Intel wireless loaded but no IP number (SuSE 9.0)

[Steve Varadi]

I try to install Intel PRO/Wireless LAN 2100 3B Mini PCI Adapter with 
driverloader. Everything looks ok, but no IP number however my AP (DI-614+ is 
set to dhcp) On eth0 I get IP address from the same AP.
Here is the details:
from /var/boot.log:
IP/Netmask: 192.168.0.100 / 255.255.255.0done  <<<< this is for eth0
    wlan0     ERROR:	command 'iwconfig wlan0 mode Automatic' returned
	Error for wireless request "Set Mode" (8B06) :
	SET failed on device wlan0 ; Invalid argument.
<notice>checkproc: /sbin/dhcpcd 1145
 DHCP client is already running on wlan0done

hepike:/home/vpista # ifconfig wlan0
wlan0     Link encap:Ethernet  HWaddr 00:04:23:85:C0:82
          inet6 addr: fe80::204:23ff:fe85:c082/64 Scope:Link
          UP BROADCAST NOTRAILERS MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:12 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

hepike:/home/vpista #  iwconfig wlan0
wlan0     IEEE 802.11-DS  ESSID:"pwl199"  Nickname:"hepike"
          Mode:Managed  Frequency:2.412GHz  Bit Rate=11Mb/s
          RTS thr=1600 B   Fragment thr=2344 B
          Encryption key:1111-1111-1122-2222-2222-9999-99   Security mode:open
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

hepike:/home/vpista # iwlist scan
lo        Interface doesn't support scanning : Operation not supported

eth0      Interface doesn't support scanning : Operation not supported

wlan0     Scan completed :
          Cell 01 - Address: 00:80:C8:01:B0:AA
                    ESSID:"pwl199"
                    Mode:Managed
                    Frequency:2.437GHz
                    Quality:1/1  Signal level:-227 dBm  Noise level:-200 dBm
                    Encryption key:off
                    Bit Rate:1Mb/s
                    Bit Rate:2Mb/s
                    Bit Rate:5.5Mb/s
                    Bit Rate:11Mb/s
                    Bit Rate:22Mb/s
                    Extra:bcn_int=100

sit0      Interface doesn't support scanning : Invalid argument

vmnet8    Interface doesn't support scanning : Operation not supported

vmnet1    Interface doesn't support scanning : Operation not supported

hepike:/home/vpista # dldrconfig --info
Linuxant DriverLoader for Wireless LAN devices, version 1.64

Web configurator: listening on 127.0.0.1:18020

Current parameters: ("dldrconfig --info")

Wireless interface name: wlan0 (format "wlan%d")
        MAC address    : 00:04:23:85:C0:82
        Device instance: PCI-0000:02:02.0-8086:1043-8086:2527
        Device driver  : w70n51
        Driver Version : 1.2.1.1
        Description    : Intel(R) PRO/Wireless 7100 LAN Card Driver
        Adapter model  : PRO/Wireless LAN 2100 3B Mini PCI Adapter
        License owner  : svaradi at freemail.hu
        License key    : DC-4F-CC-XX-XX-XX
        License status : OK (Expires 2004-04-04)
hepike:/home/vpista # iwconfig --version
iwconfig  Version 26
          Compatible with Wireless Extension v16 or earlier,
          Currently compiled with Wireless Extension v16.

Kernel    Currently compiled with Wireless Extension v16.

wlan0     Recommend Wireless Extension v11 or later,
          Currently compiled with Wireless Extension v16.

Let me know what went wrong, how can I use it??
-- 
Thanks:
Steve
From HP_zt3010 SuSE 9.0 Kmail 1.54 KDE 3.14