[driverloader] driverloader with Belkin F5D7050 ( USB device )

[Valter Ide]

It´s working now Jonathan! Thanks a lot!!!!!

JFYI it´s a Java Desktop System Release-2 that I am running...

Valter

On 30/9/2004 07:03, Linuxant support (Jonathan) wrote:

> Hi,
>
> everything seems fine the the dump you have provided. We can even see 
> that the wireless card was associated (connected) to an access point 
> in the past.
>
> Since you are using DHCP under SuSE, it is possible that you will have 
> to add the following lines in your '/etc/sysconfig/network/ifcfg-eth1' 
> file:
>
> ---
> DHCLIENT_MODIFY_RESOLV_CONF='yes'
> DHCLIENT_SET_DEFAULT_ROUTE='yes'
> ---
>
> After you have made changes to the previous file, please run the 
> following commands in a root shell to re-activate your wireless 
> interface :
>
> ---
> ifdown eth1
> ifup eth1
> ---
>
> If you require more assistance, please send at support at linuxant.com 
> the output of the following commands entered in a root shell while you 
> are close to the access point you are trying to connect to.
>
> ---
> cat /etc/sysconfig/network/ifcfg-eth1
> iwlist eth1 scanning
> ifdown eth1
> ifup eth1
> ifconfig -a
> iwconfig
> ip route
> ip addr
> cat /etc/resolv.conf
> ping www.linuxant.com -I eth1 -c 5
> ping 63.246.159.50 -I eth1 -c 5
> tail -f -n 30 /var/log/messages
> ---
>
> Regards,
>
>
> Jonathan
> Technical specialist / Linuxant
> www.linuxant.com
> support at linuxant.com
>
>
> Valter Hiroshi Ide wrote:
>
>> Hi Guys,
>>
>> I am trying to use driverloader with
>> my linux box...I just installed 2.06
>> version in a linux box ( Linux linux
>> 2.4.21-203-default #1 Wed Apr 7
>> 22:18:11 UTC 2004 i686 unknown
>> )..everything seems ok, installation (
>> make install ) was fine, web
>> configuration interface was easy
>> showing me my driver was installed my
>> device was recognized and my license
>> was up-to-date.
>> But...trying to put this interface (
>> eth1 ) up is the problem..even with
>> ifup or /etc/init.d/network does not
>> work...
>>
>> You can see the output of "dldrconfig
>> --dumpdiag" in the attachment....it
>> seems that my USB device ( Belkin
>> F5D7050 ) is not receiving DHCP data
>> from my AP...when I tested my USB
>> device in windows, everything goes fine...
>>
>> My AP is a SMC2804WBRP-G...
>>
>>
>> thanks in advance,
>>
>> Valter
>> _______________________________________________
>> driverloader mailing list
>> driverloader at lists.linuxant.com
>> https://www.linuxant.com/mailman/listinfo/driverloader
>
>