[driverloader] mandrake 10 on vaio
Rob Smith
robert.smith76 at comcast.net
Fri Nov 12 19:33:29 EST 2004
I'm having trouble getting a wireless driver to work with the internal
wireless card (802.11g) on a Sony Vaio PCG-K23 notebook running Mandrake
10.0. I downloaded and installed driverloader-2.09_k2.6.3.7mdk.i586.rpm.
The web configuration interface indicates "no devices found." I've also
included what seemed to be the relevant portion of the kernal messages:
Linux version 2.6.3-7mdk (nplanel at n3.mandrakesoft.com) (gcc version 3.3.2
(Mandrake Linux 10.0 3.3.2-6mdk)) #1 Wed Mar 17 15:56:42 CET 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001bf70000 (usable)
BIOS-e820: 000000001bf70000 - 000000001bf7f000 (ACPI data)
BIOS-e820: 000000001bf7f000 - 000000001bf80000 (ACPI NVS)
BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved)
BIOS-e820: 000000002bf80000 - 000000002c000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
447MB LOWMEM available.
On node 0 totalpages: 114544
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 110448 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI present.
Sony Vaio laptop detected.
ACPI: RSDP (v000 PTLTD ) @ 0x000f6fc0
ACPI: RSDT (v001 SONY K7 0x06040000 LTP 0x00000000) @ 0x1bf7a803
ACPI: FADT (v001 SONY K7 0x06040000 PTL 0x000f4240) @ 0x1bf7ef64
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1bf7efd8
ACPI: DSDT (v001 SONY K7 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=linux ro root=30a devfs=mount acpi=ht
resume=/dev/hda11 splash=silent
bootsplash: silent mode.
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 2791.156 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Memory: 449432k/458176k available (1816k kernel code, 7976k reserved, 849k
data, 272k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5537.79 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 136k freed
CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd890, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040211
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router ALI [10b9/1533] at 0000:00:07.0
vesafb: framebuffer at 0xf0000000, mapped to 0xdc800000, size 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=67
vesafb: protected mode interface info at c000:51c9
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x1
Initializing Cryptographic API
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
bootsplash 3.1.4-2004/02/19: looking for picture.... silentjpeg size 14856
bytes, found (800x600, 14808 bytes, v3).
Console: switching to colour frame buffer device 92x32
pty: 1024 Unix98 ptys configured
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
PCI: Enabling device 0000:00:03.0 (0000 -> 0003)
PCI: No IRQ known for interrupt pin A of device 0000:00:03.0. Please try using
pci=biosirq.
ttyS0 at I/O 0x1028 (irq = 0) is a 8250
ttyS1 at I/O 0x1040 (irq = 0) is a 8250
ttyS2 at I/O 0x1050 (irq = 0) is a 8250
ttyS3 at I/O 0x1060 (irq = 0) is a 8250
ttyS4 at I/O 0x1070 (irq = 0) is a 8250
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 0000:00:0f.0
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x8088-0x808f, BIOS settings: hdc:DMA, hdd:pio
hda: IC25N060ATMR04-0, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: QSI CD-RW/DVD-ROM SBW242C, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p12 >
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
BIOS EDD facility v0.13 2004-Mar-09, 1 devices found
Please report your BIOS at http://linux.dell.com/edd/results.html
Resume Machine: resuming from /dev/hda11
Resuming from device hda11
Resume Machine: This is normal swap space
PM: Reading pmdisk image.
PM: Resume from disk failed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 272k freed
Real Time Clock Driver v1.12
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
PCI: Assigned IRQ 11 for device 0000:00:02.0
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: irq 11, pci mem dd92d000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 10 for device 0000:00:0b.0
PCI: Sharing IRQ 10 with 0000:00:0c.1
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: irq 10, pci mem dd92f000
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:0c.0
PCI: Sharing IRQ 11 with 0000:00:0a.0
PCI: Sharing IRQ 11 with 0000:01:05.0
ohci_hcd 0000:00:0c.0: OHCI Host Controller
ohci_hcd 0000:00:0c.0: irq 11, pci mem dd931000
ohci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
PCI: Found IRQ 10 for device 0000:00:0c.1
PCI: Sharing IRQ 10 with 0000:00:0b.0
ohci_hcd 0000:00:0c.1: OHCI Host Controller
ohci_hcd 0000:00:0c.1: irq 10, pci mem dd93c000
ohci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 3-2: new full speed USB device using address 2
PCI: Found IRQ 11 for device 0000:00:0c.2
PCI: Sharing IRQ 11 with 0000:00:0a.2
ehci_hcd 0000:00:0c.2: EHCI Host Controller
ehci_hcd 0000:00:0c.2: irq 11, pci mem dd93e800
ehci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:0c.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
usb 3-2: device descriptor read/all, error -110
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
bootsplash: status on console 0 changed to on
usb 3-2: new full speed USB device using address 3
usb 3-2: device descriptor read/all, error -110
usb 3-2: new full speed USB device using address 4
usb 3-2: device not accepting address 4, error -110
EXT3 FS on hda10, internal journal
Adding 80284k swap on /dev/hda7. Priority:-1 extents:1
Adding 88316k swap on /dev/hda9. Priority:-2 extents:1
Adding 506008k swap on /dev/hda11. Priority:-3 extents:1
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected Ati IGP345M chipset
agpgart: Maximum main memory to use for agp memory: 380M
agpgart: AGP aperture is 128M @ 0xe8000000
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda12, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.6 [Flags: R/O MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
ohci1394: $Rev: 1097 $ Ben Collins
PCI: Found IRQ 11 for device 0000:00:0a.2
PCI: Sharing IRQ 11 with 0000:00:0c.2
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[e000b000-e000b7ff]
Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460301b8d986]
8139too Fast Ethernet driver 0.9.27
PCI: Found IRQ 11 for device 0000:00:12.0
eth0: RealTek RTL8139 at 0xdda28c00, 08:00:46:ed:13:f9, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (3579 buckets, 28632 max) - 300 bytes per conntrack
inserting floppy driver for 2.6.3-7mdk
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
hdc: ATAPI 24X DVD-ROM CD-R/RW CD-MRW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
NET: Registered protocol family 17
eth0: link down
driverloader: no version for "struct_module" found: kernel tainted.
driverloader: module license 'see LICENSE file; Copyright (c)2003-2004
Linuxant inc.' taints kernel.
driverloader: stack=8192/56/0
drivers/usb/core/usb.c: registered new driver driverloader
PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
PCI: No IRQ known for interrupt pin A of device 0000:00:09.0. Please try using
pci=biosirq.
0000:00:09.0: cache line size not set; forcing 8
OsHookInterrupt: request_irq(dev=0000:00:09.0, irq=0) failed err -16
driverloader: NdisWriteErrorLogEntry: ErrorCode=0xc0000001
NumberOfErrorValues=4
driverloader: NdisWriteErrorLogEntry: ErrorValue 0=0xdaa02808
driverloader: NdisWriteErrorLogEntry: ErrorValue 1=0x5d
driverloader: NdisWriteErrorLogEntry: ErrorValue 2=0xda2e0008
driverloader: NdisWriteErrorLogEntry: ErrorValue 3=0xda2e0008
eth1: failed to initialize adapter (err = -5)
eth1: Failed to register net device (-5)
driverloader: probe of 0000:00:09.0 failed with error -5
PCI: Found IRQ 11 for device 0000:00:04.0
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).
lp0: console ready
orinoco.c 0.13e (David Gibson and others)
orinoco_pci.c 0.13e (David Gibson & Jean Tourrilhes )
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943
bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943
bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943
bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943
bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943
bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943
bytes, v3).
bootsplash: status on console 5 changed to on
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
inserting floppy driver for 2.6.3-7mdk
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
inserting floppy driver for 2.6.3-7mdk
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
SCSI subsystem initialized
st: Version 20040122, fixed bufsize 32768, s/g segs 256
mtrr: 0xf0000000,0x4000000 overlaps existing 0xf0000000,0x1000000
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c035fe60(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
More information about the driverloader
mailing list