[driverloader] Wirless network needs manual activation to work

Jan Bezem jabezem at hotmail.com
Sun Jan 16 11:13:58 EST 2005 

Hello,

I'll just get straight to my point: in "dmesg" there's the following line 
which prevents my wireless network from connecting automatically.
"driverloader: OsConfigOpenWrite: cannot open 
/etc/driverloader/config/PCI-0000:03:00.0-104C:9066-010E:16EC for writing 
(err=-30)"
Therfore I need to activate the wirless network manually (and become root) 
every time I need it to work. How can I stop this?

Thanks in advance!

Jan

Complete "dmesg"  up untill the wireless network is running:
ff0c84
ACPI: FADT (v002 COMPAQ CPQ004A  0x00000002 CPQ  0x00000001) @ 0x0fff0c00
ACPI: SSDT (v001 COMPAQ  CPQGysr 0x00001001 MSFT 0x0100000e) @ 0x0fff69b8
ACPI: SSDT (v001 COMPAQ   CPQMag 0x00001001 MSFT 0x0100000e) @ 0x0fff6ac6
ACPI: DSDT (v001 COMPAQ  EVON800 0x00010000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Built 1 zonelists
Kernel command line: ro root=/dev/VolGroup00/LogVol01 acpi=on rhgb quiet
Initializing CPU#0
CPU 0 irqstacks, hard=c03dc000 soft=c03d8000
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 1395.671 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 254608k/261952k available (2011k kernel code, 6704k reserved, 653k 
data, 164k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2760.70 BogoMIPS (lpj=1380352)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000
CPU: After vendor identify, caps:  3febf9ff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps:        3febf1ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.40GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0c20)
checking if image is initramfs... it is
Freeing initrd memory: 941k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041105
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [C046] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.C046._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C046.C047._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C046.C058._PRT]
ACPI: Embedded Controller [C0E4] (gpe 29)
ACPI: Power Resource [C155] (off)
ACPI: Power Resource [C169] (off)
ACPI: Power Resource [C16D] (off)
ACPI: Power Resource [C171] (off)
ACPI: Power Resource [C17A] (on)
ACPI: PCI Interrupt Link [C0C0] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0C1] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [C0C2] (IRQs 5 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C0C3] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0C4] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [C0C5] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [C0C6] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [C0C7] (IRQs) *0, disabled.
ACPI: Power Resource [C0E3] (on)
ACPI: Power Resource [C1EB] (off)
ACPI: Power Resource [C1EC] (off)
ACPI: Power Resource [C1ED] (off)
ACPI: Power Resource [C1EE] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically.  If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device().  As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior.  If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas at hp.com
** so I can fix the driver.
pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0d: ioport range 0x1000-0x107f could not be reserved
pnp: 00:0d: ioport range 0x1100-0x113f has been reserved
pnp: 00:0d: ioport range 0x1200-0x121f has been reserved
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1105871225.463:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key D562AE99E0721BCD
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [C1EF] (off)
ACPI: Fan [C1F0] (off)
ACPI: Fan [C1F1] (off)
ACPI: Fan [C1F2] (off)
ACPI: Processor [C000] (supports C1 C2 C3)
ACPI: Processor [C000] (supports 8 throttling states)
ACPI: Thermal Zone [TZ1] (18 C)
ACPI: Thermal Zone [TZ2] (16 C)
ACPI: Thermal Zone [TZ3] (16 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i845 Chipset.
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 256M @ 0x60000000
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS2 at I/O 0x3e8 (irq = 3) is a NS16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
ICH3M: chipset revision 2
ICH3M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x4440-0x4447, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x4448-0x444f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: HITACHI_DK23DA-20, ATA DISK drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-C2512, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=38760/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 > hda4
hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 51
new absolute packet format
Touchpad has extended capability bits
-> 4 multi-buttons, i.e. besides standard buttons
-> multifinger detection
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 4681)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
C058 C0AA C0B0 C0B3 C181 C177 C178 C190 C134
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 164k freed
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel at redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
e100: Intel(R) PRO/100 Network Driver, 3.2.3-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 10 (level, low) -> IRQ 10
divert: allocating divert_blk for eth0
e100: eth0: e100_probe: addr 0x40100000, irq 10, MAC addr 00:08:02:62:50:CE
driverloader: module license 'see LICENSE file; Copyright (c)2003-2004 
Linuxant inc.' taints kernel.
driverloader: stack=16384/64/0 REGPARM
usbcore: registered new driver driverloader
ACPI: PCI Interrupt Link [C0C1] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49990 usecs
intel8x0: clocking to 48000
hw_random: RNG not detected
ACPI: PCI interrupt 0000:02:0e.2[C] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:02:0e.2: EHCI Host Controller
ehci_hcd 0000:02:0e.2: irq 10, pci mem 0x40280000
ehci_hcd 0000:02:0e.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:02:0e.2: USB 2.0 initialized, EHCI 0.95, driver 26 Oct 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:02:0e.0: OHCI Host Controller
ohci_hcd 0000:02:0e.0: irq 10, pci mem 0x40180000
ohci_hcd 0000:02:0e.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:02:0e.1[B] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:02:0e.1: OHCI Host Controller
ohci_hcd 0000:02:0e.1: irq 10, pci mem 0x40200000
ohci_hcd 0000:02:0e.1: new USB bus registered, assigned bus number 3
usb 1-3: new high speed USB device using ehci_hcd and address 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
usb 2-1: new low speed USB device using ohci_hcd and address 2
ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:06.0 [0e11:004a]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.0, mfunc 0x012c1202, devctl 0x64
SCSI subsystem initialized
Initializing USB Mass Storage driver...
Yenta: ISA IRQ mask 0x0098, PCI irq 11
Socket status: 30000020
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on 
usb-0000:02:0e.0-1
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
driverloader: usr11g.sys: 0xd0a27000..0xd0a85800 entry = d0a82c80 (pbase = 
0x10000)
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 11 (level, low) -> IRQ 11
0000:03:00.0: cache line size not set; forcing 32
divert: allocating divert_blk for eth1
eth1: New link status: Disconnected (0002)
driverloader: OsConfigOpenWrite: cannot open 
/etc/driverloader/config/PCI-0000:03:00.0-104C:9066-010E:16EC for writing 
(err=-30)
eth1: WPA, TKIP, WEP256, WEP128, WEP64 supported
eth1: TNET1130 at 0000:03:00.0 (MAC address 00:C0:49:D6:FA:F5) ready
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0360800(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
  Vendor: Kingston  Model: DataTraveler2.0   Rev: 4.70
  Type:   Direct-Access                      ANSI SCSI revision: 00
usb-storage: device scan complete
SCSI device sda: 239872 512-byte hdwr sectors (123 MB)
sda: Write Protect is off
sda: Mode Sense: 45 00 00 08
sda: assuming drive cache: write through
SCSI device sda: 239872 512-byte hdwr sectors (123 MB)
sda: Write Protect is off
sda: Mode Sense: 45 00 00 08
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
ACPI: AC Adapter [C130] (on-line)
ACPI: Battery Slot [C132] (battery absent)
ACPI: Battery Slot [C131] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [C134]
ACPI: Lid Switch [C133]
ibm_acpi: ec object not found
ACPI: Video Device [C0CE] (multi-head: yes  rom: no  post: no)
EXT3 FS on dm-0, internal journal
Adding 524280k swap on /dev/VolGroup00/LogVol00.  Priority:-1 extents:1
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
Trying to free free DMA1
pnp: Device 00:05 disabled.
ieee1394: Initialized config rom entry `ip1394'
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (2046 buckets, 16368 max) - 360 bytes per conntrack
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
pnp: Device 00:05 activated.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (interrupt-driven).
lp0: console ready
divert: not allocating divert_blk for non-ethernet device cipsec0
Cisco Systems VPN Client Version 4.0.5 (Rel) kernel module loaded
ACPI: PCI Interrupt Link [C0C0] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.11.0 20020828 on minor 0:
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
prism2_hostapd: unknown cmd=14
eth1: prism2_param: unknown param 15
eth1: prism2_param: unknown param 23
eth1: New link status: Connected (0001)
eth1: no IPv6 routers present
usbcore: deregistering driver driverloader
divert: freeing divert_blk for eth1
driverloader: stack=16384/64/0 REGPARM
usbcore: registered new driver driverloader
driverloader: usr11g.sys: 0xd0a27000..0xd0a85800 entry = d0a82c80 (pbase = 
0x10000)
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 11 (level, low) -> IRQ 11
divert: allocating divert_blk for eth1
eth1: New link status: Disconnected (0002)
eth1: WPA, TKIP, WEP256, WEP128, WEP64 supported
eth1: TNET1130 at 0000:03:00.0 (MAC address 00:C0:49:D6:FA:F5) ready
prism2_hostapd: unknown cmd=14
prism2_hostapd: unknown cmd=14
eth1: prism2_param: unknown param 15
eth1: prism2_param: unknown param 23
cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
cs: warning: no high memory space available!
usb 2-1: usbfs: process 6461 (lsusb) did not claim interface 0 before use
eth1: no IPv6 routers present
eth1: New link status: Connected (0001)

_________________________________________________________________
Gebruik MSN Messenger en krijg direct antwoord http://messenger.msn.nl/

More information about the driverloader mailing list