YNT: [driverloader] Re: Compaq 2170CA/Knoppix3.6/USR5410 PCMCIA card

[Seref Arikan]

Re: Compaq 2170CA/Knoppix3.6/USR5410 PCMCIA cardhi,
I've been struggling about this card on suse 9.2 for almost a month :) First
things first: the green led never comes on, not even in windows, but the
card works..
I can't comment on eth0, but for the drivers, the driver on linuxant site
has been the only one for me that has worked without problems, but using
this one, it's only a matter of luck for me to get the card running. After
random number of dldrstop;modprobe driverloader commands, i can get it
working. This is the version 4 of driver. Using version 5 and 6, the card is
recognized at every boot, but random crashes occur . I'm using 2.6.10 kernel
and i've applied 16K patch.
It seems sticking with version 4 of driver is the best option for me, but
for the iwlist scan issue, i can't say anything :(
Good luck..
Regards
Seref Arikan
  -----Ozgun Ileti-----
  Kimden: driverloader-bounces at lists.linuxant.com
[mailto:driverloader-bounces at lists.linuxant.com]Yerine Jim Brooks
  Tarih: Friday, January 28, 2005 11:39 PM
  Kime: 'driverloader at lists.linuxant.com'
  Bilgi: 'jimbrooks at telus.net'
  Konu: [driverloader] Re: Compaq 2170CA/Knoppix3.6/USR5410 PCMCIA card


  I have been able to get as far as successfully loading the driver and
starting the card(Power LED on).
  I am able to send commands with iwconfig however when I try iwlist wlan0
scan...
   1 - The green (TX) led does not come on.
   2 - iwlist reports nothing found.
  I have installed the latest 6.05? USR drivers on the XP partition of this
system and it is working.
  The inf file is odysseyIMF.inf. However when I try to load the drivers
from this file, while drvrloader finds them, the card does not come up
properly.

  I noticed a link on the linuxant site for this card, downloaded, and
refered to that inf file, which specified TIACX111.bin. That is where I am
currently with drvrloader reporting success but limited as mentioned above.

  One other note.
  With driverloader setup, my eth0 connection no longer works.

  Any suggestions?

  Thanks for your help,
  Jim Brooks
  removeme_jbrooks at omnexcontrols.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxant.com/pipermail/driverloader/attachments/20050131/115b7615/attachment.htm