[driverloader] USR5410 and wpa

[Linuxant support (Jonathan)]

Hi,

it seems that the kernel have a problem to allocated to the installed 
Windows XP driver all the DMA memory it needs. You could try to load the 
DriverLoader module as soon as possible as the machine boots with the 
init. scripts. This workaround is likely to fix this problem.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com



Sune Mølgaard wrote:
> Hi.
> 
> I would like to enable wpa with the amovementiened card, but the win32 
> drivers v.4.0q offered on the site doesn't support that.
> 
> Thus, I tried to load the v.6.0b15 drivers from USR's website, and this 
> snippet from dmesg shows that it wasn't successful:
> 
> driverloader: stack=8192/1448/1
> driverloader: usr11g.sys: 0xc3a10000..0xc3a6e800 entry = c3a6bc80 (pbase 
> = 0x10000)
> eth0: New link status: Disconnected (0002)
> __alloc_pages: 6-order allocation failed (gfp=0x20/0)
> driverloader: NdisMAllocateSharedMemory: FAILED: 
> MiniportAdapterHandle=c1827808 Length=204800 Cached=0 
> VirtualAddress=00000000
> eth0: failed to initialize adapter (err = -5)
> eth0: Failed to register net device (-5)
> usb.c: registered new driver driverloader
> usb.c: deregistering driver driverloader
> driverloader: stack=8192/1448/1
> driverloader: usr11g.sys: 0xc3a10000..0xc3a6e800 entry = c3a6bc80 (pbase 
> = 0x10000)
> eth0: New link status: Disconnected (0002)
> __alloc_pages: 6-order allocation failed (gfp=0x20/0)
> driverloader: NdisMAllocateSharedMemory: FAILED: 
> MiniportAdapterHandle=c1827808 Length=204800 Cached=0 
> VirtualAddress=00000000
> eth0: failed to initialize adapter (err = -5)
> eth0: Failed to register net device (-5)
> usb.c: registered new driver driverloader
> 
> So, how do I proceed? Kernel is 2.4.30, system is slackware 10.0.
> 
> Best regards,
> 
> Sune Mølgaard
>