[driverloader] WPA_supplicant: operation not supported

[Linuxant support (Jonathan)]

Hi,

you are not expected to run the 'wpa_supplicant' binary manually, you 
should use YaST to configure the WPA-PSK key. The networking subsystem 
of SuSE will take care of launching the supplicant for you when you will 
bring up the wireless interface with the 'ifup' command.

The error message:

---
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
---

is a known issue with recent WPA supplicant versions that will be fixed 
in the future. You can safely ignore these error messages, they are not 
known to be harmful.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com



Kris Lens wrote:
> Hi,
> 
> Without security, I can connect to the internet.
> When enabling WPA, something is going wrong. 
> I am using SuSE 9.3.
> This is the log:
> 
> linux:/etc # wpa_supplicant -wlan0
> -cwpa_supplicant.conf
> Trying to associate with 00:12:cf:02:b4:87
> (SSID='belkin54g' freq=2462 Mhz)
> ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not
> supported
> ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not
> supported
> Trying to associate with 00:12:cf:02:b4:87
> (SSID='belkin54g' freq=2462 Mhz)
> ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not
> supported
> ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not
> supported
> Associated with 00:12:cf:02:b4:87
> WPA: Key negotiation completed with 00:12:cf:02:b4:87
> [PTK=TKIP GTK=TKIP]
> 
> However, the shell hangs, and I still cannot connect
> to internet.
> wpa_supplicant.conf:
> network {
> ssid = "belkin54g"
> key = <same as result of wpa_passphrase>
> }
> 
> Any idea what is going wrong?
> 
> Thanks,
> Kris
> 
> 
> 
> 		
> __________________________________ 
> Yahoo! FareChase: Search multiple travel sites in one click.
> http://farechase.yahoo.com
> _______________________________________________
> driverloader mailing list
> driverloader at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/driverloader