[driverloader] card connecting but can't connect to internet
Linuxant support (Jonathan)
support at linuxant.com
Mon Nov 21 13:25:35 EST 2005
Hi,
we can see quite a lot of similar messages in your 'dmesg':
---
SFW2-IN-ILL-TARGET IN=wlan0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:0e:a6:12:41:eb:08:00 SRC=192.168.0.100
DST=192.168.0.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=56483 PROTO=UDP
SPT=137 DPT=137 LEN=58
---
The problem is likely related to the firewall installed on the machine.
Please disable it to see if it makes a difference.
Regards,
Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com
Nicholas Neuberger - Home wrote:
> I'm trying to setup a linksys wireless card on my laptop and I'm getting a bit
> further. I found the right driver for my wireless card.
>
> The web config browser port says the driver is loaded and I get a "power"
> light on on my wireless card. Kwifimanager sees the connection with an IP
> address from my WAP, but I still can't connect for some reason
>
> I even try to configure kwifimanager with a "config" but still no luck. Plus,
> the kwifimanager isn't saving the settings.
>
> I was thinking it may be a route problem or a firewall issue.
>
> I have attached the dump file.
>
> Any thoughts!!!!
>
> Nick Neuberger
>
> _______________________________________________
> driverloader mailing list
> driverloader at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/driverloader
More information about the driverloader
mailing list