<br><font size=2 face="sans-serif">Hello,</font>
<br>
<br><font size=2 face="sans-serif">there is no way at my system to activate
the bcmwl5-license. The state will always be "INVALID"
regardless if I type in manually or contact linuxant directly via http.
</font>
<br>
<br><font size=2 face="sans-serif">Below I send you the screenshot from
bcmwl5config --license and the dumpdiag-file.</font>
<br>
<br><font size=2 face="sans-serif">Thanks a lot for your help.</font>
<br>
<br><font size=2 face="sans-serif">Frank</font>
<br>
<br><font size=2 face="sans-serif">############################## License-Mail
################################</font>
<br><font size=2 face="Courier New">Dear Mr. Frank Schorb,<br>
<br>
Thank you for requesting an end-user license from Linuxant!<br>
<br>
We are sending you this email to confirm the details of the license that<br>
you recently activated.<br>
<br>
Product name: DriverLoader 30-day trial license for end-users<br>
Email address: schorb@kuttig.com<br>
Registration ID: 00:90:4B:44:85:F1<br>
License key: 0D-E8-FD-64-75-AD<br>
<br>
Please contact us if you have any problems with your license or the software.<br>
<br>
Linuxant support team<br>
www.linuxant.com<br>
support@linuxant.com<br>
</font>
<br>
<br>
<br><font size=2 face="sans-serif">############################### bcmwl5config
--license ###################################</font>
<br>
<br><font size=2 face="Courier New">Linuxant DriverLoader for Broadcom
Wireless LAN, version 1.05<br>
<br>
Note: we respect user privacy. Email addresses are not communicated<br>
nor used for any purpose other than to manage licenses!<br>
<br>
Please enter your email address [schorb@kuttig.com]: <br>
License keys can be obtained from http://www.linuxant.com/<br>
<br>
The MAC address for interface eth1 is: 00:90:4B:44:85:F1<br>
<br>
Please enter license key [0D-E8-FD-64-75-AD]: <br>
Setting license for interface eth1: "schorb@kuttig.com/0D-E8-FD-64-75-AD"<br>
<br>
Current parameters: ("bcmwl5config --info")<br>
<br>
Wireless interface name: eth1<br>
MAC address : 00:90:4B:44:85:F1<br>
Device instance: PCI-00:09.0-14e4:4320-0e11:00e7<br>
License owner : schorb@kuttig.com<br>
License key : 0D-E8-FD-64-75-AD<br>
License status : INVALID<br>
<br>
To enable the driver, enter your license information via the web configurator
at<br>
http://localhost:18020/ or http://linux:18020/<br>
or with "bcmwl5config --license".<br>
<br>
License owner and key data must EXACTLY match the information respectively<br>
provided to and by Linuxant. Otherwise, license status will not be "OK"!<br>
</font>
<br><font size=2 face="sans-serif">#################################################################################</font>
<br>
<br><font size=2 face="sans-serif">################################# --
dumpdiag ####################################</font>
<br>
<br>
<br>
<br><font size=2 face="Courier New"><br>
+ bcmwl5stop<br>
<br>
+ modprobe -v bcmwl5driverloader<br>
/sbin/insmod /lib/modules/2.4.21-99-default/misc/bcmwl5driverloader.o<br>
Using /lib/modules/2.4.21-99-default/misc/bcmwl5driverloader.o<br>
Symbol version prefix ''<br>
Warning: loading /lib/modules/2.4.21-99-default/misc/bcmwl5driverloader.o
will taint the kernel: non-GPL license - GPL for files in the "GPL"
directory; for others, only LICENSE file applies<br>
See http://www.tux.org/lkml/#export-tainted for information about
tainted modules<br>
Module bcmwl5driverloader loaded, with warnings<br>
<br>
+ lsmod<br>
Module Size
Used by Tainted: P <br>
bcmwl5driverloader 60820 0 (unused)<br>
snd-seq 36656
1 (autoclean)<br>
snd-seq-device 4048 0 (autoclean)
[snd-seq]<br>
videodev 5696
0 (autoclean)<br>
usbserial 18620
0 (autoclean) (unused)<br>
isa-pnp 30664
0 (unused)<br>
parport_pc 26248 1 (autoclean)<br>
lp
6208 0 (autoclean)<br>
parport 22888
1 (autoclean) [parport_pc lp]<br>
ipv6 209824
-1 (autoclean)<br>
key 63256
0 (autoclean) [ipv6]<br>
snd-ali5451 12132 5 <br>
snd-pcm 65124
1 [snd-ali5451]<br>
snd-page-alloc 6004 0 [snd-pcm]<br>
thermal 6148
0 (unused)<br>
snd-timer 15040
0 [snd-seq snd-pcm]<br>
snd-ac97-codec 39512 0 [snd-ali5451]<br>
processor 8248
0 [thermal]<br>
snd 35172
4 [snd-seq snd-seq-device snd-ali5451 snd-pcm snd-timer snd-ac97-codec]<br>
fan
1472 0 (unused)<br>
button 2380
0 (unused)<br>
soundcore 3588
0 [snd]<br>
battery 5600
0 (unused)<br>
ac
1664 0 (unused)<br>
ds
6668 2 <br>
yenta_socket 9760 2 <br>
pcmcia_core 43232 0 [ds
yenta_socket]<br>
st
27760 0 (autoclean) (unused)<br>
sr_mod 13432
0 (autoclean)<br>
sg
32224 0 (autoclean)<br>
keybdev 1996
0 (unused)<br>
mousedev 4084
0 (unused)<br>
joydev 5120
0 (unused)<br>
evdev 3584
0 (unused)<br>
input 3360
0 [keybdev mousedev joydev evdev]<br>
usb-uhci 22224
0 (unused)<br>
ehci-hcd 16588
0 (unused)<br>
usbcore 58668
1 [usbserial usb-uhci ehci-hcd]<br>
raw1394 16592
0 (unused)<br>
ohci1394 23728
0 (unused)<br>
ieee1394 183332
0 [raw1394 ohci1394]<br>
af_packet 12208
1 (autoclean)<br>
natsemi 15264
1 <br>
ide-scsi 10000
0 <br>
scsi_mod 97108
4 [st sr_mod sg ide-scsi]<br>
ide-cd 29664
0 <br>
cdrom 26752
0 [sr_mod ide-cd]<br>
nls_iso8859-1 2812 1 (autoclean)<br>
ntfs 74924
1 (autoclean)<br>
reiserfs 200084
1 <br>
<br>
+ date<br>
Do Okt 23 08:25:14 CEST 2003<br>
<br>
+ /usr/sbin/bcmwl5config --info<br>
Linuxant DriverLoader for Broadcom Wireless LAN, version 1.05<br>
<br>
Current parameters: ("bcmwl5config --info")<br>
<br>
Wireless interface name: eth1<br>
MAC address : 00:90:4B:44:85:F1<br>
Device instance: PCI-00:09.0-14e4:4320-0e11:00e7<br>
License owner : schorb@kuttig.com<br>
License key : 0D-E8-FD-64-75-AD<br>
License status : INVALID<br>
<br>
If you need license keys, assistance or more information, please go to:<br>
http://www.linuxant.com/<br>
<br>
When reporting a problem for the first time, please send<br>
us the file generated by "bcmwl5config --dumpdiag".<br>
<br>
To enable the driver, enter your license information via the web configurator
at<br>
http://localhost:18020/ or http://linux:18020/<br>
or with "bcmwl5config --license".<br>
<br>
License owner and key data must EXACTLY match the information respectively<br>
provided to and by Linuxant. Otherwise, license status will not be "OK"!<br>
<br>
+ identify_system<br>
linux-i686(i686)-2.4.21-99-default SuSE-9.0<br>
<br>
+ uname -a<br>
Linux linux 2.4.21-99-default #1 Wed Sep 24 13:30:51 UTC 2003 i686 i686
i386 GNU/Linux<br>
<br>
+ gcc -v<br>
Reading specs from /usr/lib/gcc-lib/i586-suse-linux/3.3.1/specs<br>
Konfiguriert mit: ../configure --enable-threads=posix --prefix=/usr --with-local-prefix=/usr/local
--infodir=/usr/share/info --mandir=/usr/share/man --libdir=/usr/lib --enable-languages=c,c++,f77,objc,java,ada
--disable-checking --enable-libgcj --with-gxx-include-dir=/usr/include/g++
--with-slibdir=/lib --with-system-zlib --enable-shared --enable-__cxa_atexit
i586-suse-linux<br>
Thread model: posix<br>
gcc-Version 3.3.1 (SuSE Linux)<br>
<br>
+ cat -v /proc/version<br>
Linux version 2.4.21-99-default (root@i386.suse.de) (gcc version 3.3.1
(SuSE Linux)) #1 Wed Sep 24 13:30:51 UTC 2003<br>
<br>
+ cat -v /proc/cpuinfo<br>
processor
: 0<br>
vendor_id
: GenuineIntel<br>
cpu family
: 15<br>
model
:
2<br>
model name
: Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz<br>
stepping
: 9<br>
cpu MHz
:
2192.232<br>
cache size
: 512 KB<br>
fdiv_bug
: no<br>
hlt_bug
:
no<br>
f00f_bug
: no<br>
coma_bug
: no<br>
fpu
:
yes<br>
fpu_exception
: yes<br>
cpuid level
: 2<br>
wp
:
yes<br>
flags
:
fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush
dts acpi mmx fxsr sse sse2 ss ht tm<br>
bogomips
: 4325.37<br>
<br>
<br>
+ cat -v /etc/SuSE-release<br>
SuSE Linux 9.0 (i586)<br>
VERSION = 9.0<br>
<br>
+ iptables -L -n<br>
Chain INPUT (policy ACCEPT)<br>
target prot opt source
destination <br>
<br>
Chain FORWARD (policy ACCEPT)<br>
target prot opt source
destination <br>
<br>
Chain OUTPUT (policy ACCEPT)<br>
target prot opt source
destination <br>
<br>
+ ifconfig -a<br>
eth0 Protokoll:Ethernet Hardware Adresse 00:0B:CD:A6:A0:48
<br>
inet Adresse:172.16.100.97 Bcast:172.16.255.255
Maske:255.255.0.0<br>
inet6 Adresse: fe80::20b:cdff:fea6:a048/64
Gültigkeitsbereich:Verbindung<br>
UP BROADCAST NOTRAILERS RUNNING MULTICAST
MTU:1500 Metric:1<br>
RX packets:8289 errors:0 dropped:0 overruns:0
frame:0<br>
TX packets:174 errors:0 dropped:0 overruns:0
carrier:0<br>
Kollisionen:0 Sendewarteschlangenlänge:100
<br>
RX bytes:1993757 (1.9 Mb) TX bytes:17934
(17.5 Kb)<br>
Interrupt:10 Basisadresse:0xa000 <br>
<br>
eth1 Protokoll:Ethernet Hardware Adresse 00:90:4B:44:85:F1
<br>
BROADCAST MULTICAST MTU:1500 Metric:1<br>
RX packets:0 errors:0 dropped:0 overruns:0
frame:0<br>
TX packets:0 errors:0 dropped:0 overruns:0
carrier:0<br>
Kollisionen:0 Sendewarteschlangenlänge:100
<br>
RX bytes:0 (0.0 b) TX bytes:0
(0.0 b)<br>
<br>
lo Protokoll:Lokale Schleife <br>
inet Adresse:127.0.0.1 Maske:255.0.0.0<br>
inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine<br>
UP LOOPBACK RUNNING MTU:16436
Metric:1<br>
RX packets:1013 errors:0 dropped:0 overruns:0
frame:0<br>
TX packets:1013 errors:0 dropped:0 overruns:0
carrier:0<br>
Kollisionen:0 Sendewarteschlangenlänge:0
<br>
RX bytes:1291400 (1.2 Mb) TX bytes:1291400
(1.2 Mb)<br>
<br>
sit0 Protokoll:IPv6-nach-IPv4 <br>
NOARP MTU:1480 Metric:1<br>
RX packets:0 errors:0 dropped:0 overruns:0
frame:0<br>
TX packets:0 errors:0 dropped:0 overruns:0
carrier:0<br>
Kollisionen:0 Sendewarteschlangenlänge:0
<br>
RX bytes:0 (0.0 b) TX bytes:0
(0.0 b)<br>
<br>
<br>
+ netstat -rn<br>
Kernel IP Routentabelle<br>
Ziel Router
Genmask Flags MSS Fenster
irtt Iface<br>
172.16.0.0 0.0.0.0 255.255.0.0
U 0 0
0 eth0<br>
0.0.0.0 172.16.0.1 0.0.0.0
UG 0 0
0 eth0<br>
<br>
+ netstat -in<br>
Kernel Schnittstellentabelle<br>
Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR
TX-DRP TX-OVR Flg<br>
eth0 1500 0 8289 0
0 0 174 0
0 0 BMNRU<br>
lo 16436 0 1013 0
0 0 1013
0 0 0 LRU<br>
<br>
+ ip addr<br>
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue <br>
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00<br>
inet 127.0.0.1/8 brd 127.255.255.255 scope host lo<br>
inet6 ::1/128 scope host <br>
2: eth0: <BROADCAST,MULTICAST,NOTRAILERS,UP> mtu 1500 qdisc pfifo_fast
qlen 100<br>
link/ether 00:0b:cd:a6:a0:48 brd ff:ff:ff:ff:ff:ff<br>
inet 172.16.100.97/16 brd 172.16.255.255 scope global eth0<br>
inet6 fe80::20b:cdff:fea6:a048/64 scope link <br>
3: sit0@NONE: <NOARP> mtu 1480 qdisc noop <br>
link/sit 0.0.0.0 brd 0.0.0.0<br>
17: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 100<br>
link/ether 00:90:4b:44:85:f1 brd ff:ff:ff:ff:ff:ff<br>
<br>
+ ip rule<br>
0:
from all lookup local <br>
32766:
from all lookup main <br>
32767:
from all lookup default <br>
<br>
+ ip route<br>
172.16.0.0/16 dev eth0 proto kernel scope link src 172.16.100.97
<br>
default via 172.16.0.1 dev eth0 <br>
<br>
+ lspci -n<br>
00:00.0 Class 0600: 1002:cab2 (rev 02)<br>
00:01.0 Class 0604: 1002:7010<br>
00:06.0 Class 0401: 10b9:5451 (rev 02)<br>
00:07.0 Class 0601: 10b9:1533<br>
00:08.0 Class 0703: 10b9:5457<br>
00:09.0 Class 0280: 14e4:4320 (rev 02)<br>
00:0a.0 Class 0607: 1217:6933 (rev 01)<br>
00:0a.1 Class 0607: 1217:6933 (rev 01)<br>
00:0c.0 Class 0c00: 104c:8026<br>
00:0e.0 Class 0c03: 1106:3038 (rev 50)<br>
00:0e.1 Class 0c03: 1106:3038 (rev 50)<br>
00:0e.2 Class 0c03: 1106:3104 (rev 51)<br>
00:10.0 Class 0101: 10b9:5229 (rev c4)<br>
00:11.0 Class 0680: 10b9:7101<br>
00:12.0 Class 0200: 100b:0020<br>
01:05.0 Class 0300: 1002:4337<br>
<br>
+ lspci -v<br>
00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP
340M] (rev 02)<br>
Flags: bus master, 66Mhz, medium devsel, latency 64<br>
Memory at d4000000 (32-bit, prefetchable) [size=64M]<br>
Memory at d000c000 (32-bit, prefetchable) [size=4K]<br>
Capabilities: [a0] AGP version 2.0<br>
<br>
00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M] (prog-if
00 [Normal decode])<br>
Flags: bus master, 66Mhz, medium devsel, latency 99<br>
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68<br>
I/O behind bridge: 00009000-00009fff<br>
Memory behind bridge: d0500000-d05fffff<br>
Prefetchable memory behind bridge: d8000000-dfffffff<br>
<br>
00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link
Controller Audio Device (rev 02)<br>
Subsystem: Hewlett-Packard Company: Unknown device 002a<br>
Flags: bus master, medium devsel, latency 64, IRQ 5<br>
I/O ports at 1000 [size=256]<br>
Memory at d0000000 (32-bit, non-prefetchable) [size=4K]<br>
Capabilities: [dc] Power Management version 2<br>
<br>
00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]<br>
Subsystem: ALi Corporation ALI M1533 Aladdin IV ISA Bridge<br>
Flags: bus master, medium devsel, latency 0<br>
Capabilities: [a0] Power Management version 1<br>
<br>
00:08.0 Modem: ALi Corporation Intel 537 [M5457 AC-Link Modem] (prog-if
00 [Generic])<br>
Subsystem: Hewlett-Packard Company: Unknown device 002a<br>
Flags: medium devsel, IRQ 10<br>
Memory at d0001000 (32-bit, non-prefetchable) [size=4K]<br>
I/O ports at 1400 [size=256]<br>
Capabilities: [40] Power Management version 2<br>
<br>
00:09.0 Network controller: Broadcom Corporation BCM94306 802.11g (rev
02)<br>
Subsystem: Compaq Computer Corporation: Unknown device 00e7<br>
Flags: bus master, fast devsel, latency 64, IRQ 10<br>
Memory at d0002000 (32-bit, non-prefetchable) [size=8K]<br>
Capabilities: [40] Power Management version 2<br>
<br>
00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 01)<br>
Subsystem: Hewlett-Packard Company: Unknown device 002a<br>
Flags: bus master, stepping, slow devsel, latency 168, IRQ 11<br>
Memory at d0004000 (32-bit, non-prefetchable) [size=4K]<br>
Bus: primary=00, secondary=03, subordinate=03, sec-latency=176<br>
Memory window 0: d0200000-d02ff000 (prefetchable)<br>
Memory window 1: d0100000-d01ff000<br>
I/O window 0: 00001c00-00001cff<br>
I/O window 1: 00001800-000018ff<br>
16-bit legacy interface ports at 0001<br>
<br>
00:0a.1 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 01)<br>
Subsystem: Hewlett-Packard Company: Unknown device 002a<br>
Flags: bus master, stepping, slow devsel, latency 168, IRQ 11<br>
Memory at d0005000 (32-bit, non-prefetchable) [size=4K]<br>
Bus: primary=00, secondary=04, subordinate=04, sec-latency=176<br>
Memory window 0: d0400000-d04ff000 (prefetchable)<br>
Memory window 1: d0300000-d03ff000<br>
I/O window 0: 00002400-000024ff<br>
I/O window 1: 00002000-000020ff<br>
16-bit legacy interface ports at 0001<br>
<br>
00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000
Controller (PHY/Link) (prog-if 10 [OHCI])<br>
Subsystem: Hewlett-Packard Company: Unknown device 002a<br>
Flags: bus master, medium devsel, latency 64, IRQ 11<br>
Memory at d0006000 (32-bit, non-prefetchable) [size=2K]<br>
Memory at d0008000 (32-bit, non-prefetchable) [size=16K]<br>
Capabilities: [44] Power Management version 2<br>
<br>
00:0e.0 USB Controller: VIA Technologies, Inc. USB (rev 50) (prog-if 00
[UHCI])<br>
Subsystem: Hewlett-Packard Company: Unknown device 002a<br>
Flags: bus master, medium devsel, latency 64, IRQ 10<br>
I/O ports at 2800 [size=32]<br>
Capabilities: [80] Power Management version 2<br>
<br>
00:0e.1 USB Controller: VIA Technologies, Inc. USB (rev 50) (prog-if 00
[UHCI])<br>
Subsystem: Hewlett-Packard Company: Unknown device 002a<br>
Flags: bus master, medium devsel, latency 64, IRQ 10<br>
I/O ports at 2820 [size=32]<br>
Capabilities: [80] Power Management version 2<br>
<br>
00:0e.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if
20 [EHCI])<br>
Subsystem: Hewlett-Packard Company: Unknown device 002a<br>
Flags: bus master, medium devsel, latency 64, IRQ 11<br>
Memory at d0006800 (32-bit, non-prefetchable) [size=256]<br>
Capabilities: [80] Power Management version 2<br>
<br>
00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) (prog-if fa)<br>
Subsystem: Hewlett-Packard Company: Unknown device 002a<br>
Flags: bus master, medium devsel, latency 32<br>
I/O ports at 2840 [size=16]<br>
Capabilities: [60] Power Management version 2<br>
<br>
00:11.0 Bridge: ALi Corporation M7101 PMU<br>
Subsystem: Hewlett-Packard Company: Unknown device 002a<br>
Flags: medium devsel<br>
<br>
00:12.0 Ethernet controller: National Semiconductor Corporation DP83815
(MacPhyter) Ethernet Controller<br>
Subsystem: Hewlett-Packard Company: Unknown device 002a<br>
Flags: bus master, medium devsel, latency 90, IRQ 10<br>
I/O ports at 2c00 [size=256]<br>
Memory at d0007000 (32-bit, non-prefetchable) [size=4K]<br>
Expansion ROM at <unassigned> [disabled] [size=64K]<br>
Capabilities: [40] Power Management version 2<br>
<br>
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 340M
(prog-if 00 [VGA])<br>
Subsystem: Hewlett-Packard Company: Unknown device 002a<br>
Flags: bus master, stepping, fast Back2Back, 66Mhz, medium devsel, latency
66, IRQ 10<br>
Memory at d8000000 (32-bit, prefetchable) [size=128M]<br>
I/O ports at 9000 [size=256]<br>
Memory at d0500000 (32-bit, non-prefetchable) [size=64K]<br>
Expansion ROM at <unassigned> [disabled] [size=128K]<br>
Capabilities: [58] AGP version 2.0<br>
Capabilities: [50] Power Management version 2<br>
<br>
<br>
+ lspci -n -vvv<br>
00:00.0 Class 0600: 1002:cab2 (rev 02)<br>
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-<br>
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-<br>
Latency: 64<br>
Region 0: Memory at d4000000 (32-bit, prefetchable) [size=64M]<br>
Region 1: Memory at d000c000 (32-bit, prefetchable) [size=4K]<br>
Capabilities: [a0] AGP version 2.0<br>
Status:
RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3-
Rate=x1,x2,x4<br>
Command:
RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none><br>
<br>
00:01.0 Class 0604: 1002:7010<br>
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-<br>
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-<br>
Latency: 99<br>
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68<br>
I/O behind bridge: 00009000-00009fff<br>
Memory behind bridge: d0500000-d05fffff<br>
Prefetchable memory behind bridge: d8000000-dfffffff<br>
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-<br>
<br>
00:06.0 Class 0401: 10b9:5451 (rev 02)<br>
Subsystem: 103c:002a<br>
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-<br>
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR+ <PERR+<br>
Latency: 64 (500ns min, 6000ns max)<br>
Interrupt: pin A routed to IRQ 5<br>
Region 0: I/O ports at 1000 [size=256]<br>
Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=4K]<br>
Capabilities: [dc] Power Management version 2<br>
Flags:
PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)<br>
Status:
D0 PME-Enable- DSel=0 DScale=0 PME-<br>
<br>
00:07.0 Class 0601: 10b9:1533<br>
Subsystem: 10b9:1533<br>
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-<br>
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-<br>
Latency: 0<br>
Capabilities: [a0] Power Management version 1<br>
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)<br>
Status:
D0 PME-Enable- DSel=0 DScale=0 PME-<br>
<br>
00:08.0 Class 0703: 10b9:5457<br>
Subsystem: 103c:002a<br>
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-<br>
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-<br>
Interrupt: pin A routed to IRQ 10<br>
Region 0: Memory at d0001000 (32-bit, non-prefetchable) [size=4K]<br>
Region 1: I/O ports at 1400 [size=256]<br>
Capabilities: [40] Power Management version 2<br>
Flags:
PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)<br>
Status:
D0 PME-Enable- DSel=0 DScale=0 PME-<br>
<br>
00:09.0 Class 0280: 14e4:4320 (rev 02)<br>
Subsystem: 0e11:00e7<br>
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-<br>
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-<br>
Latency: 64<br>
Interrupt: pin A routed to IRQ 10<br>
Region 0: Memory at d0002000 (32-bit, non-prefetchable) [size=8K]<br>
Capabilities: [40] Power Management version 2<br>
Flags:
PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)<br>
Status:
D0 PME-Enable- DSel=0 DScale=2 PME-<br>
<br>
00:0a.0 Class 0607: 1217:6933 (rev 01)<br>
Subsystem: 103c:002a<br>
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B-<br>
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-<br>
Latency: 168<br>
Interrupt: pin A routed to IRQ 11<br>
Region 0: Memory at d0004000 (32-bit, non-prefetchable) [size=4K]<br>
Bus: primary=00, secondary=03, subordinate=03, sec-latency=176<br>
Memory window 0: d0200000-d02ff000 (prefetchable)<br>
Memory window 1: d0100000-d01ff000<br>
I/O window 0: 00001c00-00001cff<br>
I/O window 1: 00001800-000018ff<br>
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+<br>
16-bit legacy interface ports at 0001<br>
<br>
00:0a.1 Class 0607: 1217:6933 (rev 01)<br>
Subsystem: 103c:002a<br>
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B-<br>
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-<br>
Latency: 168<br>
Interrupt: pin A routed to IRQ 11<br>
Region 0: Memory at d0005000 (32-bit, non-prefetchable) [size=4K]<br>
Bus: primary=00, secondary=04, subordinate=04, sec-latency=176<br>
Memory window 0: d0400000-d04ff000 (prefetchable)<br>
Memory window 1: d0300000-d03ff000<br>
I/O window 0: 00002400-000024ff<br>
I/O window 1: 00002000-000020ff<br>
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+<br>
16-bit legacy interface ports at 0001<br>
<br>
00:0c.0 Class 0c00: 104c:8026 (prog-if 10)<br>
Subsystem: 103c:002a<br>
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-<br>
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-<br>
Latency: 64 (500ns min, 1000ns max), cache line size 08<br>
Interrupt: pin A routed to IRQ 11<br>
Region 0: Memory at d0006000 (32-bit, non-prefetchable) [size=2K]<br>
Region 1: Memory at d0008000 (32-bit, non-prefetchable) [size=16K]<br>
Capabilities: [44] Power Management version 2<br>
Flags:
PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)<br>
Status:
D0 PME-Enable- DSel=0 DScale=0 PME+<br>
<br>
00:0e.0 Class 0c03: 1106:3038 (rev 50)<br>
Subsystem: 103c:002a<br>
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-<br>
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-<br>
Latency: 64, cache line size 08<br>
Interrupt: pin A routed to IRQ 10<br>
Region 4: I/O ports at 2800 [size=32]<br>
Capabilities: [80] Power Management version 2<br>
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)<br>
Status:
D0 PME-Enable- DSel=0 DScale=0 PME-<br>
<br>
00:0e.1 Class 0c03: 1106:3038 (rev 50)<br>
Subsystem: 103c:002a<br>
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-<br>
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-<br>
Latency: 64, cache line size 08<br>
Interrupt: pin B routed to IRQ 10<br>
Region 4: I/O ports at 2820 [size=32]<br>
Capabilities: [80] Power Management version 2<br>
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)<br>
Status:
D0 PME-Enable- DSel=0 DScale=0 PME-<br>
<br>
00:0e.2 Class 0c03: 1106:3104 (rev 51) (prog-if 20)<br>
Subsystem: 103c:002a<br>
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-<br>
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-<br>
Latency: 64, cache line size 08<br>
Interrupt: pin C routed to IRQ 11<br>
Region 0: Memory at d0006800 (32-bit, non-prefetchable) [size=256]<br>
Capabilities: [80] Power Management version 2<br>
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)<br>
Status:
D0 PME-Enable- DSel=0 DScale=0 PME-<br>
<br>
00:10.0 Class 0101: 10b9:5229 (rev c4) (prog-if fa)<br>
Subsystem: 103c:002a<br>
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-<br>
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-<br>
Latency: 32 (500ns min, 1000ns max)<br>
Interrupt: pin A routed to IRQ 0<br>
Region 4: I/O ports at 2840 [size=16]<br>
Capabilities: [60] Power Management version 2<br>
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)<br>
Status:
D0 PME-Enable- DSel=0 DScale=0 PME-<br>
<br>
00:11.0 Class 0680: 10b9:7101<br>
Subsystem: 103c:002a<br>
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-<br>
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-<br>
<br>
00:12.0 Class 0200: 100b:0020<br>
Subsystem: 103c:002a<br>
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-<br>
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-<br>
Latency: 90 (2750ns min, 13000ns max)<br>
Interrupt: pin A routed to IRQ 10<br>
Region 0: I/O ports at 2c00 [size=256]<br>
Region 1: Memory at d0007000 (32-bit, non-prefetchable) [size=4K]<br>
Expansion ROM at <unassigned> [disabled] [size=64K]<br>
Capabilities: [40] Power Management version 2<br>
Flags:
PMEClk- DSI- D1+ D2+ AuxCurrent=320mA PME(D0+,D1+,D2+,D3hot+,D3cold+)<br>
Status:
D0 PME-Enable- DSel=0 DScale=0 PME+<br>
<br>
01:05.0 Class 0300: 1002:4337<br>
Subsystem: 103c:002a<br>
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B+<br>
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-<br>
Latency: 66 (2000ns min), cache line size 08<br>
Interrupt: pin A routed to IRQ 10<br>
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]<br>
Region 1: I/O ports at 9000 [size=256]<br>
Region 2: Memory at d0500000 (32-bit, non-prefetchable) [size=64K]<br>
Expansion ROM at <unassigned> [disabled] [size=128K]<br>
Capabilities: [58] AGP version 2.0<br>
Status:
RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3-
Rate=x1,x2,x4<br>
Command:
RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none><br>
Capabilities: [50] Power Management version 2<br>
Flags:
PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)<br>
Status:
D0 PME-Enable- DSel=0 DScale=0 PME-<br>
<br>
<br>
+ cat -v /proc/pci<br>
PCI devices found:<br>
Bus 0, device 0, function 0:<br>
Host bridge: PCI device 1002:cab2 (ATI Technologies Inc)
(rev 2).<br>
Master Capable. Latency=64. <br>
Prefetchable 32 bit memory at 0xd4000000 [0xd7ffffff].<br>
Prefetchable 32 bit memory at 0xd000c000 [0xd000cfff].<br>
Bus 0, device 1, function 0:<br>
PCI bridge: PCI device 1002:7010 (ATI Technologies Inc) (rev
0).<br>
Master Capable. Latency=99. Min Gnt=12.<br>
Bus 0, device 6, function 0:<br>
Multimedia audio controller: ALi Corporation. [ALi] M5451
PCI AC-Link Controller Audio Device (rev 2).<br>
IRQ 5.<br>
Master Capable. Latency=64. Min Gnt=2.Max
Lat=24.<br>
I/O at 0x1000 [0x10ff].<br>
Non-prefetchable 32 bit memory at 0xd0000000 [0xd0000fff].<br>
Bus 0, device 7, function 0:<br>
ISA bridge: ALi Corporation. [ALi] M1533 PCI to ISA Bridge
[Aladdin IV] (rev 0).<br>
Bus 0, device 8, function 0:<br>
Modem: ALi Corporation. [ALi] M5457 AC-Link Modem Interface
Controller (rev 0).<br>
IRQ 10.<br>
Master Capable. Latency=64. <br>
Non-prefetchable 32 bit memory at 0xd0001000 [0xd0001fff].<br>
I/O at 0x1400 [0x14ff].<br>
Bus 0, device 9, function 0:<br>
Network controller: PCI device 14e4:4320 (Broadcom Corporation)
(rev 2).<br>
IRQ 10.<br>
Master Capable. Latency=64. <br>
Non-prefetchable 32 bit memory at 0xd0002000 [0xd0003fff].<br>
Bus 0, device 10, function 0:<br>
CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller
(rev 1).<br>
IRQ 11.<br>
Master Capable. Latency=168. Min Gnt=128.Max
Lat=5.<br>
Non-prefetchable 32 bit memory at 0xd0004000 [0xd0004fff].<br>
Bus 0, device 10, function 1:<br>
CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller
(#2) (rev 1).<br>
IRQ 11.<br>
Master Capable. Latency=168. Min Gnt=128.Max
Lat=5.<br>
Non-prefetchable 32 bit memory at 0xd0005000 [0xd0005fff].<br>
Bus 0, device 12, function 0:<br>
FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000
Controller (PHY/Link) (rev 0).<br>
IRQ 11.<br>
Master Capable. Latency=64. Min Gnt=2.Max
Lat=4.<br>
Non-prefetchable 32 bit memory at 0xd0006000 [0xd00067ff].<br>
Non-prefetchable 32 bit memory at 0xd0008000 [0xd000bfff].<br>
Bus 0, device 14, function 0:<br>
USB Controller: VIA Technologies, Inc. USB (rev 80).<br>
IRQ 10.<br>
Master Capable. Latency=64. <br>
I/O at 0x2800 [0x281f].<br>
Bus 0, device 14, function 1:<br>
USB Controller: VIA Technologies, Inc. USB (#2) (rev 80).<br>
IRQ 10.<br>
Master Capable. Latency=64. <br>
I/O at 0x2820 [0x283f].<br>
Bus 0, device 14, function 2:<br>
USB Controller: VIA Technologies, Inc. USB 2.0 (rev 81).<br>
IRQ 11.<br>
Master Capable. Latency=64. <br>
Non-prefetchable 32 bit memory at 0xd0006800 [0xd00068ff].<br>
Bus 0, device 16, function 0:<br>
IDE interface: ALi Corporation. [ALi] M5229 IDE (rev 196).<br>
Master Capable. Latency=32. Min Gnt=2.Max
Lat=4.<br>
I/O at 0x2840 [0x284f].<br>
Bus 0, device 17, function 0:<br>
Bridge: ALi Corporation. [ALi] M7101 PMU (rev 0).<br>
Bus 0, device 18, function 0:<br>
Ethernet controller: National Semiconductor Corporation DP83815
(MacPhyter) Ethernet Controller (rev 0).<br>
IRQ 10.</font>
<br><font size=2 face="Courier New"> Master Capable.
Latency=90. Min Gnt=11.Max Lat=52.<br>
I/O at 0x2c00 [0x2cff].<br>
Non-prefetchable 32 bit memory at 0xd0007000 [0xd0007fff].<br>
Bus 1, device 5, function 0:<br>
VGA compatible controller: PCI device 1002:4337 (ATI Technologies
Inc) (rev 0).<br>
IRQ 10.<br>
Master Capable. Latency=66. Min Gnt=8.<br>
Prefetchable 32 bit memory at 0xd8000000 [0xdfffffff].<br>
I/O at 0x9000 [0x90ff].<br>
Non-prefetchable 32 bit memory at 0xd0500000 [0xd050ffff].<br>
<br>
+ cat -v /proc/cmdline<br>
root=/dev/hda3 vga=0x317 desktop hdc=ide-scsi hdclun=0 splash=silent<br>
<br>
+ cat -v /proc/uptime<br>
1351.07 1136.43<br>
<br>
+ cat -v /proc/devices<br>
Character devices:<br>
1 mem<br>
2 pty<br>
3 ttyp<br>
4 ttyS<br>
5 cua<br>
6 lp<br>
7 vcs<br>
10 misc<br>
13 input<br>
14 sound<br>
21 sg<br>
29 fb<br>
81 video_capture<br>
116 alsa<br>
128 ptm<br>
136 pts<br>
162 raw<br>
171 ieee1394<br>
180 usb<br>
188 ttyUSB<br>
254 pcmcia<br>
<br>
Block devices:<br>
1 ramdisk<br>
3 ide0<br>
7 loop<br>
9 md<br>
11 sr<br>
22 ide1<br>
<br>
+ cat -v /proc/misc<br>
135 rtc<br>
1 psaux<br>
<br>
+ cat -v /proc/filesystems<br>
nodev
rootfs<br>
nodev
bdev<br>
nodev
proc<br>
nodev
sockfs<br>
nodev
futexfs<br>
nodev
tmpfs<br>
nodev
shm<br>
nodev
pipefs<br>
nodev
eventpollfs<br>
ext2<br>
nodev
ramfs<br>
minix<br>
iso9660<br>
nodev
nfs<br>
nodev
devpts<br>
reiserfs<br>
ntfs<br>
nodev
usbdevfs<br>
nodev
usbfs<br>
<br>
+ cat -v /proc/interrupts<br>
CPU0 <br>
0: 1351078 XT-PIC
timer<br>
1: 854 XT-PIC
keyboard<br>
2: 0
XT-PIC cascade<br>
5: 13639 XT-PIC
ALI 5451<br>
8: 2
XT-PIC rtc<br>
9: 225 XT-PIC
acpi<br>
10: 8500 XT-PIC
usb-uhci, usb-uhci, eth0, bcmwl5driverloader<br>
11: 13 XT-PIC
ohci1394, ehci_hcd, O2 Micro, Inc. OZ6933 Cardbus Controller, O2
Micro, Inc. OZ6933 Cardbus Controller (#2)<br>
12: 37036 XT-PIC
PS/2 Mouse<br>
14: 15545 XT-PIC
ide0<br>
15: 15693 XT-PIC
ide1<br>
NMI: 0 <br>
LOC: 0 <br>
ERR: 0<br>
MIS: 0<br>
<br>
+ cat -v /proc/iomem<br>
00000000-0009f7ff : System RAM<br>
0009f800-0009ffff : reserved<br>
000a0000-000bffff : Video RAM area<br>
000c0000-000c7fff : Video ROM<br>
000cf000-000cf7ff : Extension ROM<br>
000d8000-000dffff : reserved<br>
000f0000-000fffff : System ROM<br>
00100000-1bf6ffff : System RAM<br>
00100000-0028dadf : Kernel code<br>
0028dae0-00324f63 : Kernel data<br>
1bf70000-1bf7bfff : ACPI Tables<br>
1bf7c000-1bf7ffff : ACPI Non-volatile Storage<br>
1bf80000-1bffffff : reserved<br>
2bf80000-2bffffff : reserved<br>
d0000000-d0000fff : ALi Corporation. [ALi] M5451 PCI AC-Link Controller
Audio Device<br>
d0001000-d0001fff : ALi Corporation. [ALi] M5457 AC-Link Modem Interface
Controller<br>
d0002000-d0003fff : PCI device 14e4:4320 (Broadcom Corporation)<br>
d0002000-d0003fff : bcmwl5driverloader<br>
d0004000-d0004fff : O2 Micro, Inc. OZ6933 Cardbus Controller<br>
d0005000-d0005fff : O2 Micro, Inc. OZ6933 Cardbus Controller (#2)<br>
d0006000-d00067ff : Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller
(PHY/Link)<br>
d0006000-d00067ff : ohci1394<br>
d0006800-d00068ff : VIA Technologies, Inc. USB 2.0<br>
d0006800-d00068ff : ehci_hcd<br>
d0007000-d0007fff : National Semiconductor Corporation DP83815 (MacPhyter)
Ethernet Controller<br>
d0007000-d0007fff : eth0<br>
d0008000-d000bfff : Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller
(PHY/Link)<br>
d000c000-d000cfff : PCI device 1002:cab2 (ATI Technologies Inc)<br>
d0100000-d01fffff : PCI CardBus #03<br>
d0200000-d02fffff : PCI CardBus #03<br>
d0300000-d03fffff : PCI CardBus #04<br>
d0400000-d04fffff : PCI CardBus #04<br>
d0500000-d05fffff : PCI Bus #01<br>
d0500000-d050ffff : PCI device 1002:4337 (ATI Technologies Inc)<br>
d4000000-d7ffffff : PCI device 1002:cab2 (ATI Technologies Inc)<br>
d8000000-dfffffff : PCI Bus #01<br>
d8000000-dfffffff : PCI device 1002:4337 (ATI Technologies Inc)<br>
d8000000-dbfeffff : vesafb<br>
fff80000-ffffffff : reserved<br>
<br>
+ cat -v /proc/ioports<br>
0000-001f : dma1<br>
0020-003f : pic1<br>
0040-005f : timer<br>
0060-006f : keyboard<br>
0070-007f : rtc<br>
0080-008f : dma page reg<br>
00a0-00bf : pic2<br>
00c0-00df : dma2<br>
00f0-00ff : fpu<br>
0170-0177 : ide1<br>
01f0-01f7 : ide0<br>
02f8-02ff : serial(auto)<br>
0376-0376 : ide1<br>
0378-037a : parport0<br>
03c0-03df : vesafb<br>
03f6-03f6 : ide0<br>
03f8-03ff : serial(auto)<br>
0cf8-0cff : PCI conf1<br>
1000-10ff : ALi Corporation. [ALi] M5451 PCI AC-Link Controller Audio Device<br>
1000-10ff : ALI 5451<br>
1400-14ff : ALi Corporation. [ALi] M5457 AC-Link Modem Interface Controller<br>
1800-18ff : PCI CardBus #03<br>
1c00-1cff : PCI CardBus #03<br>
2000-20ff : PCI CardBus #04<br>
2400-24ff : PCI CardBus #04<br>
2800-281f : VIA Technologies, Inc. USB<br>
2800-281f : usb-uhci<br>
2820-283f : VIA Technologies, Inc. USB (#2)<br>
2820-283f : usb-uhci<br>
2840-284f : ALi Corporation. [ALi] M5229 IDE<br>
2840-2847 : ide0<br>
2848-284f : ide1<br>
2c00-2cff : National Semiconductor Corporation DP83815 (MacPhyter) Ethernet
Controller<br>
2c00-2cff : eth0<br>
8000-803f : ALi Corporation. [ALi] M7101 PMU<br>
8040-805f : ALi Corporation. [ALi] M7101 PMU<br>
9000-9fff : PCI Bus #01<br>
9000-90ff : PCI device 1002:4337 (ATI Technologies Inc)<br>
<br>
+ cat -v /proc/dma<br>
4: cascade<br>
<br>
+ cat -v /proc/mtrr<br>
reg00: base=0x00000000 ( 0MB), size= 256MB: write-back, count=1<br>
reg01: base=0x10000000 ( 256MB), size= 128MB: write-back, count=1<br>
reg02: base=0x18000000 ( 384MB), size= 64MB: write-back, count=1<br>
reg03: base=0x1bf80000 ( 447MB), size= 512KB: uncachable, count=1<br>
reg04: base=0x2bf80000 ( 703MB), size= 512KB: uncachable, count=1<br>
reg05: base=0xd8000000 (3456MB), size= 32MB: write-combining, count=1<br>
<br>
+ cat -v /proc/partitions<br>
major minor #blocks name rio rmerge rsect ruse
wio wmerge wsect wuse running use aveq<br>
<br>
3 0 29302560 hda 11913 30193 324324 171058
3219 8479 94320 902335 -4 1337937 68609<br>
3 1 23157666 hda1 217 1491 1708 599 0 0 0
0 0 599 599<br>
3 2 899640 hda2 1 0 8 11 0 0 0 0 0
11 11<br>
3 3 5245222 hda3 11689 28676 322560
170268 3219 8479 94320 902335 0 89331 1072619<br>
<br>
+ cat -v /proc/mounts<br>
rootfs / rootfs rw 0 0<br>
/dev/root / reiserfs rw 0 0<br>
proc /proc proc rw 0 0<br>
devpts /dev/pts devpts rw 0 0<br>
/dev/hda1 /windows/C ntfs ro,noatime,nodiratime,nosuid,nodev,noexec,uid=0,gid=100,umask=02,nls=iso8859-1,errors=continue,mft_zone_multiplier=1
0 0<br>
tmpfs /dev/shm tmpfs rw 0 0<br>
usbdevfs /proc/bus/usb usbdevfs rw 0 0<br>
<br>
+ cat -v /proc/swaps<br>
Filename
Type
Size
Used
Priority<br>
/dev/hda2
partition
899632
0
42<br>
<br>
+ cat -v /proc/meminfo<br>
total: used: free:
shared: buffers: cached:<br>
Mem: 460398592 303783936 156614656 0 53092352
152809472<br>
Swap: 921223168 0 921223168<br>
MemTotal: 449608 kB<br>
MemFree: 152944 kB<br>
MemShared: 0 kB<br>
Buffers: 51848 kB<br>
Cached: 149228 kB<br>
SwapCached: 0 kB<br>
Active: 122108 kB<br>
Inactive: 139716 kB<br>
HighTotal: 0 kB<br>
HighFree: 0 kB<br>
LowTotal: 449608 kB<br>
LowFree: 152944 kB<br>
SwapTotal: 899632 kB<br>
SwapFree: 899632 kB<br>
BigFree: 0 kB<br>
<br>
+ cat -v /proc/stat<br>
cpu 15497 40 6020 113553<br>
cpu0 15497 40 6020 113553<br>
page 162646 47165<br>
swap 1 0<br>
intr 1442613 1351098 854 0 3 3 13639 0 2 2 225 8500 13 37036 0 15545 15693
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0<br>
disk_io: (3,0):(15245,11934,324324,3311,94320) <br>
ctxt 511030<br>
btime 1066890179<br>
processes 5965<br>
<br>
+ cat -v /proc/apm<br>
cat: /proc/apm: Datei oder Verzeichnis nicht gefunden<br>
<br>
+ cat -v /proc/modules<br>
iptable_filter 1644 0 (autoclean)
(unused)<br>
ip_tables 11232
1 [iptable_filter]<br>
bcmwl5driverloader 60820 0 (unused)<br>
snd-seq 36656
1 (autoclean)<br>
snd-seq-device 4048 0 (autoclean)
[snd-seq]<br>
videodev 5696
0 (autoclean)<br>
usbserial 18620
0 (autoclean) (unused)<br>
isa-pnp 30664
0 (unused)<br>
parport_pc 26248 1 (autoclean)<br>
lp
6208 0 (autoclean)<br>
parport 22888
1 (autoclean) [parport_pc lp]<br>
ipv6 209824
-1 (autoclean)<br>
key 63256
0 (autoclean) [ipv6]<br>
snd-ali5451 12132 5<br>
snd-pcm 65124
1 [snd-ali5451]<br>
snd-page-alloc 6004 0 [snd-pcm]<br>
thermal 6148
0 (unused)<br>
snd-timer 15040
0 [snd-seq snd-pcm]<br>
snd-ac97-codec 39512 0 [snd-ali5451]<br>
processor 8248
0 [thermal]<br>
snd 35172
4 [snd-seq snd-seq-device snd-ali5451 snd-pcm snd-timer snd-ac97-codec]<br>
fan
1472 0 (unused)<br>
button 2380
0 (unused)<br>
soundcore 3588
0 [snd]<br>
battery 5600
0 (unused)<br>
ac
1664 0 (unused)<br>
ds
6668 2<br>
yenta_socket 9760 2<br>
pcmcia_core 43232 0 [ds
yenta_socket]<br>
st
27760 0 (autoclean) (unused)<br>
sr_mod 13432
0 (autoclean)<br>
sg
32224 0 (autoclean)<br>
keybdev 1996
0 (unused)<br>
mousedev 4084
0 (unused)<br>
joydev 5120
0 (unused)<br>
evdev 3584
0 (unused)<br>
input 3360
0 [keybdev mousedev joydev evdev]<br>
usb-uhci 22224
0 (unused)<br>
ehci-hcd 16588
0 (unused)<br>
usbcore 58668
1 [usbserial usb-uhci ehci-hcd]<br>
raw1394 16592
0 (unused)<br>
ohci1394 23728
0 (unused)<br>
ieee1394 183332
0 [raw1394 ohci1394]<br>
af_packet 12208
1 (autoclean)<br>
natsemi 15264
1<br>
ide-scsi 10000
0<br>
scsi_mod 97108
4 [st sr_mod sg ide-scsi]<br>
ide-cd 29664
0<br>
cdrom 26752
0 [sr_mod ide-cd]<br>
nls_iso8859-1 2812 1 (autoclean)<br>
ntfs 74924
1 (autoclean)<br>
reiserfs 200084
1<br>
<br>
+ cat -v /proc/ldiscs<br>
cat: /proc/ldiscs: Datei oder Verzeichnis nicht gefunden<br>
<br>
+ modprobe -V<br>
modprobe: Nothing to load ???<br>
Specify at least a module or a wildcard like \*<br>
modprobe version 2.4.25<br>
<br>
+ modprobe -l *driverloader*<br>
<br>
+ cat -v /etc/modules.conf<br>
#<br>
# Copyright (c) 1996-2002 SuSE Linux AG Nuernberg, Germany.<br>
# All rights reserved.<br>
#<br>
# Author: Hubert Mantel <mantel@suse.de>, 1996-2002<br>
#<br>
# Configuration file for loadable modules; used by modprobe<br>
#<br>
#<br>
########################################################################<br>
# Aliases - specify your hardware<br>
########################################################################<br>
<br>
alias eth0 natsemi<br>
alias tr0 off<br>
alias scsi_hostadapter off<br>
alias fb0 off<br>
<br>
########################################################################<br>
# only used for Mylex or Compaq Raid as module<br>
########################################################################<br>
<br>
alias block-major-48 off<br>
alias block-major-49 off<br>
alias block-major-72 off<br>
alias block-major-73 off<br>
<br>
########################################################################<br>
# only needed for fifth and sixth IDE adaptor<br>
########################################################################<br>
<br>
alias block-major-56 off<br>
alias block-major-57 off<br>
<br>
########################################################################<br>
# mouse (for older busmice)<br>
########################################################################<br>
<br>
alias char-major-10 off<br>
<br>
########################################################################<br>
# If you want to use the new autofs4<br>
########################################################################<br>
<br>
# alias autofs autofs4<br>
<br>
########################################################################<br>
# For parallel port devices, uncomment the following two lines and<br>
# change "frpw" to the protocol type you use<br>
########################################################################<br>
<br>
# post-install paride insmod frpw<br>
# pre-remove paride rmmod frpw<br>
<br>
########################################################################<br>
#<br>
# Aliases for OSS<br>
#<br>
# These aliases will be changed by YaST2 sound configurator.<br>
# If you would like to configure OSS drivers by yourself, please<br>
# take a look at the files on /usr/src/linux/Documentation/sound.<br>
#<br>
########################################################################<br>
<br>
alias char-major-14 off<br>
alias sound off<br>
alias midi off<br>
<br>
########################################################################<br>
# Options; these are examples; uncomment and modify the lines you need<br>
########################################################################<br>
<br>
# options cdu31a cdu31a_port=0x340 cdu31a_irq=0<br>
# options sbpcd sbpcd=0x230,1<br>
# options aztcd aztcd=0x320<br>
# options cm206 cm206=0x340,11<br>
# options gscd gscd=0x340<br>
# options mcd mcd=0x300,11<br>
# options mcdx mcdx=0x300,11<br>
# options optcd optcd=0x340<br>
# options sjcd sjcd_base=0x340<br>
# options sonycd535 sonycd535=0x340<br>
# options isp16 isp16_cdrom_base=0x340
isp16_cdrom_irq=0 isp16_cdrom_dma=0 isp16_cdrom_type=Sanyo<br>
<br>
# options ne io=0x300 irq=5<br>
<br>
# Use this if you have two cards:<br>
# options ne io=0x300,0x320 irq=5,7<br>
<br>
# options tulip options=0<br>
# options 3c59x options=0<br>
# options 3c501 io=0x280 irq=5<br>
# options 3c503 io=0x280 irq=5 xcvr=0<br>
# options 3c505 io=0x300 irq=10<br>
# options 3c507 io=0x300 irq=10<br>
# options 3c509 irq=10<br>
# options at1700 io=0x260 irq=10<br>
# options smc-ultra io=0x200 irq=10<br>
# options wd io=0x300 irq=10<br>
# options smc9194 io=0x200 irq=10 ifport=0<br>
# options e2100 io=0x300 irq=10 mem=0xd0000
xcvr=0<br>
# options depca io=0x200 irq=7<br>
# options ewrk3 io=0x300 irq=10<br>
# options eexpress io=0x300 irq=10<br>
# options hp-plus io=0x300 irq=10<br>
# options hp io=0x300 irq=10<br>
# options hp100 hp100_port=0x380<br>
# options apricot io=0x300 irq=10<br>
# options ac3200 io=0x300 irq=10 mem=0xd0000<br>
# options de620 io=0x378 irq=7 bnc=1<br>
# options ibmtr io=0xa20<br>
# options arcnet io=0x300 irq=10 shmem=0xd0000<br>
# options plip io=0x378 irq=7<br>
# options eepro io=0x260 irq=10 mem=0x6000<br>
# options eth16i io=0x2a0 irq=10<br>
# options fmv18x io=0x220 irq=10<br>
# options ni52 io=0x360 irq=9 memstart=0xd0000
memend=0xd4000<br>
# options bttv pll=1 radio=0 card=0<br>
# options tuner type=0<br>
# options msp3400 once=1 simple=1<br>
<br>
# post-install bttv /sbin/modprobe "-k" tuner; #
/sbin/modprobe "-k"
msp3400<br>
<br>
options dummy0 -o dummy0<br>
options dummy1 -o dummy1<br>
<br>
########################################################################<br>
# cipe section<br>
########################################################################<br>
<br>
alias cipcb0 cipcb<br>
alias cipcb1 cipcb<br>
<br>
options cipcb cipe_debug=0<br>
<br>
########################################################################<br>
# block dev aliases<br>
########################################################################<br>
<br>
alias block-major-1 rd<br>
alias block-major-2 floppy<br>
alias block-major-3 off<br>
alias block-major-7 loop<br>
alias block-major-8 sd_mod<br>
alias block-major-11 sr_mod<br>
alias block-major-13 xd<br>
alias block-major-15 cdu31a<br>
alias block-major-16 gscd<br>
alias block-major-17 optcd<br>
alias block-major-18 sjcd<br>
alias block-major-20 mcdx<br>
alias block-major-22 off<br>
alias block-major-23 mcd<br>
alias block-major-24 sonycd535<br>
alias block-major-25 sbpcd<br>
alias block-major-26 sbpcd<br>
alias block-major-27 sbpcd<br>
alias block-major-28 sbpcd<br>
alias block-major-29 aztcd<br>
alias block-major-32 cm206<br>
alias block-major-33 off<br>
alias block-major-34 off<br>
# network block device<br>
alias block-major-43 off<br>
alias block-major-45 pd<br>
alias block-major-46 pcd<br>
alias block-major-47 pf<br>
alias block-major-117 evms<br>
<br>
########################################################################<br>
# char dev aliases<br>
########################################################################<br>
<br>
alias char-major-6 lp<br>
alias char-major-9 st<br>
alias char-major-10-130 softdog<br>
alias char-major-10-134 off<br>
alias char-major-10-135 off<br>
alias char-major-10-175 agpgart<br>
alias char-major-10-181 toshiba<br>
alias char-major-10-240 agpgarti810<br>
alias char-major-10-250 sonypi<br>
options sonypi minor=250<br>
alias char-major-15 off<br>
alias char-major-19 cyclades<br>
alias char-major-20 cyclades<br>
alias char-major-21 sg<br>
alias char-major-27 ftape<br>
# fb<br>
alias char-major-29 off<br>
alias char-major-36 netlink_dev<br>
# alias char-major-43 hisax<br>
# alias char-major-44 hisax<br>
# alias char-major-45 hisax<br>
alias char-major-43 off<br>
alias char-major-44 off<br>
alias char-major-45 off<br>
alias char-major-48 riscom8<br>
alias char-major-49 riscom8<br>
alias char-major-67 coda<br>
alias char-major-75 specialix<br>
alias char-major-76 specialix<br>
alias char-major-81 videodev<br>
alias char-major-81-0 off<br>
alias char-major-81-1 off<br>
alias char-major-81-2 off<br>
alias char-major-81-3 off<br>
<br>
alias char-major-83 vtx<br>
options vtx quiet=1<br>
<br>
alias char-major-89 i2c-dev<br>
alias char-major-96 pt<br>
alias char-major-97 pg<br>
alias char-major-107 3dfx<br>
alias char-major-109 lvm-mod<br>
<br>
# Alsa sound support.<br>
# Warning: please don't modify comments over aliases 'snd-card-#'<br>
alias char-major-116 snd<br>
<br>
########################################################################<br>
# ppp over ethernet<br>
# the kernel 2.2 uses pppox<br>
# the kernel 2.4 uses pppoe<br>
########################################################################<br>
<br>
if `kernelversion` == "2.2"<br>
alias char-major-144 pppox<br>
post-install pppox insmod mssclampfw<br>
pre-remove pppox rmmod mssclampfw<br>
else<br>
alias char-major-108 ppp_generic<br>
alias char-major-144 pppoe<br>
alias net-pf-24 pppoe<br>
endif<br>
<br>
########################################################################<br>
# IrDA<br>
########################################################################<br>
<br>
alias char-major-161 ircomm-tty<br>
<br>
########################################################################<br>
# USB<br>
########################################################################<br>
<br>
# done by hotplug<br>
alias char-major-166 off<br>
<br>
########################################################################<br>
# Moxa Multiport Serial Boards<br>
########################################################################<br>
<br>
alias char-major-172 moxa<br>
alias char-major-173 moxa<br>
<br>
# options moxa type=2,,, baseaddr=0xdc000,,, numports=8,,,<br>
alias char-major-174 mxser<br>
alias char-major-175 mxser<br>
# options mxser ioaddr=0x180<br>
<br>
#alias char-major-180
usbcore<br>
<br>
alias InterMezzo intermezzo<br>
alias char-major-185 intermezzo<br>
<br>
alias char-major-188 usbserial<br>
<br>
alias char-major-195 NVdriver<br>
alias char-major-206 osst<br>
alias char-major-212 off<br>
<br>
alias binfmt-204 binfmt_aout<br>
alias binfmt-263 binfmt_aout<br>
alias binfmt-264 binfmt_aout<br>
alias binfmt-267 binfmt_aout<br>
alias binfmt-0064 binfmt_aout<br>
alias binfmt-0008 binfmt_aout<br>
<br>
alias iso9660 isofs<br>
alias tty-ldisc-1 slip<br>
alias tty-ldisc-2 serio<br>
alias tty-ldisc-5 mkiss<br>
<br>
# alias tty-ldisc-7 6pack<br>
alias tty-ldisc-7 off<br>
<br>
# IrDA<br>
alias tty-ldisc-11 irtty<br>
<br>
# alias ax0 mkiss<br>
alias ax0 off<br>
# alias sp0 6pack<br>
alias sp0 off<br>
alias slip0 slip</font>
<br><font size=2 face="Courier New">alias sl0 slip<br>
alias slip1 slip<br>
alias sl1 slip<br>
<br>
########################################################################<br>
# the kernel 2.2 uses ppp.o as ppp driver,<br>
# the kernel 2.4 uses ppp_generic.o<br>
########################################################################<br>
<br>
if `kernelversion` == "2.2"<br>
alias ppp0 ppp<br>
alias ppp1 ppp<br>
alias tty-ldisc-3 ppp<br>
else<br>
alias ppp0 ppp_generic<br>
alias ppp1 ppp_generic<br>
alias tty-ldisc-3 ppp_async<br>
endif<br>
<br>
alias plip0 plip<br>
alias plip1 plip<br>
<br>
# Tunnel interfaces<br>
alias sit0 ipv6<br>
alias gre0 ip_gre<br>
alias ipip0 ipip<br>
<br>
alias ppp-compress-18 ppp_mppe<br>
alias ppp-compress-21 bsd_comp<br>
alias ppp-compress-24 ppp_deflate<br>
alias ppp-compress-26 ppp_deflate<br>
<br>
alias net-pf-1 unix<br>
alias net-pf-3 ax25<br>
# alias net-pf-3 off<br>
alias net-pf-4 ipx<br>
# alias net-pf-4 off<br>
alias net-pf-5 appletalk<br>
# alias net-pf-5 off<br>
alias net-pf-6 netrom<br>
# alias net-pf-6 off<br>
alias net-pf-10 ipv6<br>
# alias net-pf-10 off<br>
alias net-pf-11 rose<br>
# alias net-pf-11 off<br>
alias net-pf-17 af_packet<br>
alias net-pf-31 bluez<br>
<br>
alias bt-proto-0 l2cap<br>
alias bt-proto-2 sco<br>
alias bt-proto-3 rfcomm<br>
alias bt-proto-4 bnep<br>
<br>
alias md-personality-1 linear<br>
alias md-personality-2 raid0<br>
alias md-personality-3 raid1<br>
alias md-personality-4 raid5<br>
alias md-personality-7 multipath<br>
<br>
alias tap0 ethertap<br>
alias tap1 ethertap<br>
alias tap2 ethertap<br>
alias tap3 ethertap<br>
alias tap4 ethertap<br>
alias tap5 ethertap<br>
alias tap6 ethertap<br>
alias tap7 ethertap<br>
alias tap8 ethertap<br>
alias tap9 ethertap<br>
alias tap10 ethertap<br>
alias tap11 ethertap<br>
alias tap12 ethertap<br>
alias tap13 ethertap<br>
alias tap14 ethertap<br>
alias tap15 ethertap<br>
<br>
# don't try to reset isa-pnp cards on startup<br>
options isa-pnp isapnp_reset=0<br>
<br>
# end of common part for modules.conf<br>
# begin of i386 part for modules.conf<br>
<br>
alias char-major-4 serial<br>
alias char-major-5 serial<br>
<br>
alias parport_lowlevel parport_pc<br>
# options parport_pc io=0x378 irq=none,none<br>
# If you have multiple parallel ports, specify them this way:<br>
# options parport_pc io=0x378,0x278 irq=none,none<br>
<br>
# Linux ACP modem (Mwave)<br>
alias char-major-10-219 mwave<br>
# options mwave dspirq=10 dspio=0x130 uartirq=3 uartio=0x2f8<br>
<br>
# nVidia nforce chipset (network + audio)<br>
#alias eth0 nvnet<br>
#alias sound-slot-1 nvaudio<br>
#alias usb-interface usb-ohci<br>
<br>
# IBM thinkpad tpctl<br>
# see /usr/share/doc/packages/tpctl/<br>
alias char-major-10-170 thinkpad<br>
# options thinkpad enable_smapi=0<br>
<br>
# Linux-ABI<br>
if `kernelversion` == "2.2"<br>
alias char-major-30 iBCS<br>
alias binfmt-332 iBCS<br>
alias binfmt-518 iBCS<br>
alias binfmt-002c iBCS<br>
else<br>
alias char-major-30 abi-ibcs<br>
alias binfmt-0004 binfmt_coff<br>
alias binfmt-332 abi-ibcs<br>
alias binfmt-518 abi-ibcs<br>
alias binfmt-002c abi-ibcs<br>
alias personality-1 abi-ibcs<br>
alias personality-2 abi-ibcs<br>
alias personality-3 abi-sco<br>
alias personality-4 abi-wyse<br>
alias personality-5 abi-ibcs<br>
alias personality-7 abi-ibcs<br>
alias personality-13 abi-solaris<br>
alias personality-14 abi-uw7<br>
post-install binfmt_misc mount -t binfmt_misc none /proc/sys/fs/binfmt_misc<br>
pre-remove binfmt_misc umount /proc/sys/fs/binfmt_misc<br>
endif<br>
<br>
# required for DRI support on SiS chips<br>
options sisfb mem=12288 mode=none<br>
<br>
########################################################################<br>
# AGP<br>
########################################################################<br>
<br>
pre-install mga /sbin/modprobe "-k" "agpgart"<br>
pre-install r128 /sbin/modprobe "-k" "agpgart"<br>
pre-install radeon /sbin/modprobe "-k" "agpgart"<br>
options agpgart agp_try_unsupported=1<br>
<br>
options snd-ali5451 snd_enable=1 snd_index=0 snd_pcm_channels=32 snd_spdif=0<br>
<br>
<br>
<br>
# YaST2: sound system dependent part<br>
#<br>
alias sound-slot-0 snd-card-0<br>
alias sound-service-0-0 snd-mixer-oss<br>
alias sound-slot-1 off<br>
alias sound-service-1-0 off<br>
alias sound-slot-2 off<br>
alias sound-service-2-0 off<br>
alias sound-slot-3 off<br>
alias sound-service-3-0 off<br>
options snd snd_cards_limit=1 snd_major=116<br>
# H0_h.F+vlYRc314B:M5451 PCI AC-Link Controller Audio Device<br>
alias snd-card-0 snd-ali5451<br>
alias sound-service-0-1 snd-seq-oss<br>
alias sound-service-0-3 snd-pcm-oss<br>
alias sound-service-0-8 snd-seq-oss<br>
alias sound-service-0-11 snd-mixer-oss<br>
alias sound-service-0-12 snd-pcm-oss<br>
<br>
<br>
<br>
<br>
# end of i386 part for modules.conf<br>
# please keep this at the end and add local modifications to modules.conf.local<br>
include /etc/modules.conf.local <br>
alias eth1 bcmwl5driverloader<br>
<br>
+ cat -v /etc/modprobe.conf<br>
#<br>
# Copyright (c) 1996-2002 SuSE Linux AG Nuernberg, Germany.<br>
# All rights reserved.<br>
#<br>
# Author: Hubert Mantel <mantel@suse.de>, 1996-2002<br>
#<br>
# Configuration file for loadable modules; used by modprobe<br>
#<br>
#<br>
########################################################################<br>
# Aliases - specify your hardware<br>
########################################################################<br>
<br>
install eth0 /bin/true<br>
install eth1 /bin/true<br>
install tr0 /bin/true<br>
install scsi_hostadapter /bin/true<br>
install fb0 /bin/true<br>
<br>
########################################################################<br>
# only used for Mylex or Compaq Raid as module<br>
########################################################################<br>
<br>
install block-major-48 /bin/true<br>
install block-major-49 /bin/true<br>
install block-major-72 /bin/true<br>
install block-major-73 /bin/true<br>
<br>
########################################################################<br>
# only needed for fifth and sixth IDE adaptor<br>
########################################################################<br>
<br>
install block-major-56 /bin/true<br>
install block-major-57 /bin/true<br>
<br>
########################################################################<br>
# mouse (for older busmice)<br>
########################################################################<br>
<br>
install char-major-10 /bin/true<br>
<br>
########################################################################<br>
# If you want to use the new autofs4<br>
########################################################################<br>
<br>
# alias autofs autofs4<br>
<br>
########################################################################<br>
# For parallel port devices, uncomment the following two lines and<br>
# change "frpw" to the protocol type you use<br>
########################################################################<br>
<br>
# install paride /sbin/modprobe --ignore-install paride && { /sbin/modprobe
--ignore-install frpw; }<br>
# remove paride { /sbin/modprobe -r --ignore-remove frpw; } ; /sbin/modprobe
-r --ignore-remove paride<br>
<br>
########################################################################<br>
#<br>
# Aliases for OSS<br>
#<br>
# These aliases will be changed by YaST2 sound configurator.<br>
# If you would like to configure OSS drivers by yourself, please<br>
# take a look at the files on /usr/src/linux/Documentation/sound.<br>
#<br>
########################################################################<br>
<br>
install char-major-14 /bin/true<br>
install sound /bin/true<br>
install midi /bin/true<br>
<br>
########################################################################<br>
# Options; these are examples; uncomment and modify the lines you need<br>
########################################################################<br>
<br>
# options cdu31a cdu31a_port=0x340 cdu31a_irq=0<br>
# options sbpcd sbpcd=0x230,1<br>
# options aztcd aztcd=0x320<br>
# options cm206 cm206=0x340,11<br>
# options gscd gscd=0x340<br>
# options mcd mcd=0x300,11<br>
# options mcdx mcdx=0x300,11<br>
# options optcd optcd=0x340<br>
# options sjcd sjcd_base=0x340<br>
# options sonycd535 sonycd535=0x340<br>
# options isp16 isp16_cdrom_base=0x340
isp16_cdrom_irq=0 isp16_cdrom_dma=0 isp16_cdrom_type=Sanyo<br>
<br>
# options ne io=0x300 irq=5<br>
<br>
# Use this if you have two cards:<br>
# options ne io=0x300,0x320 irq=5,7<br>
<br>
# options tulip options=0<br>
# options 3c59x options=0<br>
# options 3c501 io=0x280 irq=5<br>
# options 3c503 io=0x280 irq=5 xcvr=0<br>
# options 3c505 io=0x300 irq=10<br>
# options 3c507 io=0x300 irq=10<br>
# options 3c509 irq=10<br>
# options at1700 io=0x260 irq=10<br>
# options smc-ultra io=0x200 irq=10<br>
# options wd io=0x300 irq=10<br>
# options smc9194 io=0x200 irq=10 ifport=0<br>
# options e2100 io=0x300 irq=10 mem=0xd0000
xcvr=0<br>
# options depca io=0x200 irq=7<br>
# options ewrk3 io=0x300 irq=10<br>
# options eexpress io=0x300 irq=10<br>
# options hp-plus io=0x300 irq=10<br>
# options hp io=0x300 irq=10<br>
# options hp100 hp100_port=0x380<br>
# options apricot io=0x300 irq=10<br>
# options ac3200 io=0x300 irq=10 mem=0xd0000<br>
# options de620 io=0x378 irq=7 bnc=1<br>
# options ibmtr io=0xa20<br>
# options arcnet io=0x300 irq=10 shmem=0xd0000<br>
# options plip io=0x378 irq=7<br>
# options eepro io=0x260 irq=10 mem=0x6000<br>
# options eth16i io=0x2a0 irq=10<br>
# options fmv18x io=0x220 irq=10<br>
# options ni52 io=0x360 irq=9 memstart=0xd0000
memend=0xd4000<br>
# options bttv pll=1 radio=0 card=0<br>
# options tuner type=0<br>
# options msp3400 once=1 simple=1<br>
<br>
# install bttv /sbin/modprobe --ignore-install bttv && { /sbin/modprobe
-k tuner; /sbin/modprobe -k msp3400; }<br>
#<br>
<br>
install dummy0 /sbin/modprobe -o dummy0 --ignore-install dummy0<br>
install dummy1 /sbin/modprobe -o dummy1 --ignore-install dummy1<br>
<br>
########################################################################<br>
# cipe section<br>
########################################################################<br>
<br>
alias cipcb0 cipcb<br>
alias cipcb1 cipcb<br>
<br>
options cipcb cipe_debug=0<br>
<br>
########################################################################<br>
# block dev aliases<br>
########################################################################<br>
<br>
alias block-major-1 rd<br>
alias block-major-2 floppy<br>
install block-major-3 /bin/true<br>
alias block-major-7 loop<br>
alias block-major-8 sd_mod<br>
alias block-major-11 sr_mod<br>
alias block-major-13 xd<br>
alias block-major-15 cdu31a<br>
alias block-major-16 gscd<br>
alias block-major-17 optcd<br>
alias block-major-18 sjcd<br>
alias block-major-20 mcdx<br>
install block-major-22 /bin/true<br>
alias block-major-23 mcd<br>
alias block-major-24 sonycd535<br>
alias block-major-25 sbpcd<br>
alias block-major-26 sbpcd<br>
alias block-major-27 sbpcd<br>
alias block-major-28 sbpcd<br>
alias block-major-29 aztcd<br>
alias block-major-32 cm206<br>
install block-major-33 /bin/true<br>
install block-major-34 /bin/true<br>
# network block device<br>
install block-major-43 /bin/true<br>
alias block-major-45 pd<br>
alias block-major-46 pcd<br>
alias block-major-47 pf<br>
alias block-major-117 evms<br>
<br>
########################################################################<br>
# char dev aliases<br>
########################################################################<br>
<br>
alias char-major-6 lp<br>
alias char-major-9 st<br>
alias char-major-10-130 softdog<br>
install char-major-10-134 /bin/true<br>
install char-major-10-135 /bin/true<br>
alias char-major-10-175 agpgart<br>
alias char-major-10-181 toshiba<br>
alias char-major-10-240 agpgarti810<br>
alias char-major-10-250 sonypi<br>
options sonypi minor=250<br>
install char-major-15 /bin/true<br>
alias char-major-19 cyclades<br>
alias char-major-20 cyclades<br>
alias char-major-21 sg<br>
alias char-major-27 ftape<br>
install char-major-29 /bin/true<br>
alias char-major-36 netlink_dev<br>
# alias char-major-43 hisax<br>
# alias char-major-44 hisax<br>
# alias char-major-45 hisax<br>
install char-major-43 /bin/true<br>
install char-major-44 /bin/true<br>
install char-major-45 /bin/true<br>
alias char-major-48 riscom8<br>
alias char-major-49 riscom8<br>
alias char-major-67 coda<br>
alias char-major-75 specialix<br>
alias char-major-76 specialix<br>
alias char-major-81 videodev<br>
install char-major-81-0 /bin/true<br>
install char-major-81-1 /bin/true<br>
install char-major-81-2 /bin/true<br>
install char-major-81-3 /bin/true<br>
<br>
alias char-major-83 vtx<br>
options vtx quiet=1<br>
<br>
alias char-major-89 i2c-dev<br>
alias char-major-96 pt<br>
alias char-major-97 pg<br>
alias char-major-107 3dfx<br>
alias char-major-109 lvm-mod<br>
# remove this if sound is configured<br>
install char-major-116 /bin/true<br>
<br>
########################################################################<br>
# ppp over ethernet<br>
# the kernel 2.2 uses pppox<br>
# the kernel 2.4 uses pppoe<br>
########################################################################<br>
<br>
alias char-major-108 ppp_generic<br>
alias char-major-144 pppoe<br>
alias net-pf-24 pppoe<br>
<br>
########################################################################<br>
# IrDA<br>
########################################################################<br>
<br>
alias char-major-161 ircomm-tty<br>
<br>
########################################################################<br>
# USB<br>
########################################################################<br>
<br>
install char-major-166 /bin/true<br>
<br>
########################################################################<br>
# Moxa Multiport Serial Boards<br>
########################################################################<br>
<br>
alias char-major-172 moxa<br>
alias char-major-173 moxa<br>
<br>
# options moxa type=2,,, baseaddr=0xdc000,,, numports=8,,,<br>
alias char-major-174 mxser<br>
alias char-major-175 mxser<br>
# options mxser ioaddr=0x180<br>
<br>
#alias char-major-180 usbcore<br>
<br>
alias InterMezzo intermezzo<br>
alias char-major-185 intermezzo<br>
<br>
alias char-major-188 usbserial<br>
<br>
alias char-major-195 NVdriver<br>
alias char-major-206 osst<br>
alias char-major-212 /bin/true<br>
<br>
alias binfmt-204 binfmt_aout<br>
alias binfmt-263 binfmt_aout<br>
alias binfmt-264 binfmt_aout<br>
alias binfmt-267 binfmt_aout<br>
alias binfmt-0064 binfmt_aout<br>
alias binfmt-0008 binfmt_aout<br>
<br>
alias iso9660 isofs<br>
alias tty-ldisc-1 slip<br>
alias tty-ldisc-2 serio<br>
alias tty-ldisc-5 mkiss<br>
<br>
# alias tty-ldisc-7 6pack<br>
install tty-ldisc-7 /bin/true<br>
<br>
# IrDA<br>
alias tty-ldisc-11 irtty<br>
<br>
# alias ax0 mkiss<br>
install ax0 /bin/true<br>
# alias sp0 6pack<br>
install sp0 /bin/true<br>
alias slip0 slip<br>
alias sl0 slip<br>
alias slip1 slip<br>
alias sl1 slip<br>
<br>
########################################################################<br>
# the kernel 2.2 uses ppp.o as ppp driver,<br>
# the kernel 2.4 uses ppp_generic.o<br>
########################################################################<br>
<br>
alias ppp0 ppp_generic<br>
alias ppp1 ppp_generic<br>
alias tty-ldisc-3 ppp_async<br>
<br>
alias plip0 plip<br>
alias plip1 plip<br>
<br>
# Tunnel interfaces<br>
alias sit0 ipv6<br>
alias gre0 ip_gre<br>
alias ipip0 ipip<br>
<br>
alias ppp-compress-18 ppp_mppe<br>
alias ppp-compress-21 bsd_comp<br>
alias ppp-compress-24 ppp_deflate<br>
alias ppp-compress-26 ppp_deflate<br>
<br>
alias net-pf-1 unix<br>
alias net-pf-3 ax25<br>
# install net-pf-3 /bin/true<br>
alias net-pf-4 ipx<br>
# install net-pf-4 /bin/true<br>
alias net-pf-5 appletalk<br>
# install net-pf-5 /bin/true<br>
alias net-pf-6 netrom<br>
# install net-pf-6 /bin/true<br>
alias net-pf-10 ipv6<br>
# install net-pf-10 /bin/true<br>
alias net-pf-11 rose<br>
# install net-pf-11 /bin/true<br>
alias net-pf-17 af_packet<br>
alias net-pf-31 bluez<br>
<br>
alias bt-proto-0 l2cap<br>
alias bt-proto-2 sco<br>
alias bt-proto-3 rfcomm<br>
alias bt-proto-4 bnep<br>
<br>
alias md-personality-1 linear<br>
alias md-personality-2 raid0<br>
alias md-personality-3 raid1<br>
alias md-personality-4 raid5<br>
alias md-personality-7 multipath<br>
<br>
alias tap0 ethertap<br>
alias tap1 ethertap<br>
alias tap2 ethertap<br>
alias tap3 ethertap<br>
alias tap4 ethertap<br>
alias tap5 ethertap<br>
alias tap6 ethertap<br>
alias tap7 ethertap<br>
alias tap8 ethertap<br>
alias tap9 ethertap<br>
alias tap10 ethertap<br>
alias tap11 ethertap<br>
alias tap12 ethertap<br>
alias tap13 ethertap<br>
alias tap14 ethertap<br>
alias tap15 ethertap<br>
<br>
# don't try to reset isa-pnp cards on startup<br>
options isa-pnp isapnp_reset=0<br>
<br>
# end of common part for modprobe.conf<br>
# begin of i386 part for modprobe.conf<br>
<br>
alias char-major-4 serial<br>
alias char-major-5 serial<br>
<br>
alias parport_lowlevel parport_pc<br>
# options parport_pc io=0x378 irq=none,none<br>
# If you have multiple parallel ports, specify them this way:<br>
# options parport_pc io=0x378,0x278 irq=none,none<br>
<br>
# Linux ACP modem (Mwave)<br>
alias char-major-10-219 mwave<br>
# options mwave dspirq=10 dspio=0x130 uartirq=3 uartio=0x2f8<br>
<br>
# nVidia nforce chipset (network + audio)<br>
#alias eth0 nvnet<br>
#alias sound-slot-1 nvaudio<br>
#alias usb-interface usb-ohci<br>
<br>
# IBM thinkpad tpctl<br>
# see /usr/share/doc/packages/tpctl/<br>
alias char-major-10-170 thinkpad<br>
# options thinkpad enable_smapi=0<br>
<br>
# Linux-ABI<br>
alias char-major-30 abi-ibcs<br>
alias binfmt-0004 binfmt_coff<br>
alias binfmt-332 abi-ibcs<br>
alias binfmt-518 abi-ibcs<br>
alias binfmt-002c abi-ibcs<br>
alias personality-1 abi-ibcs<br>
alias personality-2 abi-ibcs<br>
alias personality-3 abi-sco<br>
alias personality-4 abi-wyse<br>
alias personality-5 abi-ibcs<br>
alias personality-7 abi-ibcs<br>
alias personality-13 abi-solaris<br>
alias personality-14 abi-uw7<br>
install binfmt_misc /sbin/modprobe --ignore-install binfmt_misc &&
{ mount -t binfmt_misc none /proc/sys/fs/binfmt_misc; }<br>
remove binfmt_misc { umount /proc/sys/fs/binfmt_misc; } ; /sbin/modprobe
-r --ignore-remove binfmt_misc<br>
<br>
# required for DRI support on SiS chips<br>
options sisfb mode=none mem=12288<br>
<br>
########################################################################<br>
# AGP<br>
########################################################################<br>
<br>
install mga { /sbin/modprobe -k agpgart; } ; /sbin/modprobe
--ignore-install mga<br>
install r128 { /sbin/modprobe -k agpgart; } ; /sbin/modprobe --ignore-install
r128<br>
install radeon { /sbin/modprobe -k agpgart; } ; /sbin/modprobe --ignore-install
radeon<br>
options agpgart agp_try_unsupported=1<br>
<br>
# end of i386 part for modprobe.conf<br>
# please keep this at the end and add local modifications to modules.conf.local<br>
include /etc/modprobe.conf.local<br>
alias eth1 bcmwl5driverloader<br>
<br>
+ depmod -e -a<br>
<br>
+ cat -v /proc/tty/drivers<br>
usb-serial /dev/ttyUSB 188
0-254 serial<br>
serial /dev/cua
5 64-127 serial:callout<br>
serial /dev/ttyS
4 64-127 serial<br>
pty_slave /dev/pts
136 0-255 pty:slave<br>
pty_master /dev/ptm 128
0-255 pty:master</font>
<br><font size=2 face="Courier New">pty_slave
/dev/ttyp 3 0-255 pty:slave<br>
pty_master /dev/pty
2 0-255 pty:master<br>
/dev/vc/0 /dev/vc/0
4 0 system:vtmaster<br>
/dev/ptmx /dev/ptmx
5 2 system<br>
/dev/console /dev/console 5
1 system:console<br>
/dev/tty /dev/tty
5 0 system:/dev/tty<br>
unknown /dev/vc/%d
4 1-63 console<br>
<br>
+ cat -v /proc/tty/driver/serial<br>
serinfo:1.0 driver:5.05c revision:2001-07-08<br>
0: uart:16550A port:3F8 irq:4 baud:9600 tx:0 rx:0 <br>
1: uart:16550A port:2F8 irq:3 baud:9600 tx:0 rx:0 <br>
<br>
+ cat -v /proc/tty/driver/usb-serial<br>
usbserinfo:1.0 driver:v1.4<br>
<br>
+ cd /etc/bcmwl5driverloader/config && find . -ls<br>
115099 0 drwxr-xr-x 2 root root
112 Okt 23 08:25 .<br>
115100 4 -r--r--r-- 1 root root
678 Okt 13 09:13 ./default<br>
116120 4 -rw-r--r-- 1 root root
443 Okt 23 08:25 ./00:90:4B:44:85:F1<br>
<br>
+ cd /etc/bcmwl5driverloader/config && find . -print -type f -exec
cat {} \;<br>
.<br>
./default<br>
DriverDesc="Broadcom Wireless LAN Adapter"<br>
#DriverDesc="Wireless-G Notebook Adapter"<br>
#AdapterDesc = ""<br>
#<br>
#ForcePIO= 0 <br>
#NoRadio= 0 <br>
#<br>
#WPA= 0 <br>
#Buffers= 0 <br>
#<br>
RadioState= 0 <br>
Locale= 0 # 15 in INF<br>
Channel= 11 <br>
PowerSaveMode= 0 <br>
Rate= 0 <br>
PLCPHeader= 0 <br>
antdiv= -1 <br>
frag= 2346 <br>
rts= 2347 <br>
PwrOut= 100 <br>
IBSSGMode= 0 <br>
IBSSGProtection= 2 <br>
#LegacyMode= 0 <br>
#band= 0 <br>
#BTCoexist= 0 <br>
#AssocPref= 0 <br>
#RoamPref= 0 <br>
RoamTrigger= -70 <br>
#FrameBursting= 0 <br>
gpio0= -1 <br>
gpio1= -1 <br>
gpio2= -1 <br>
gpio3= -1 <br>
BadFramePreempt= 0 <br>
Interference_Mode= -1 <br>
scan_channel_time= -1 <br>
scan_unassoc_time= -1 <br>
scan_home_time= -1 <br>
scan_passes= -1 <br>
#<br>
EnableAutoConnect= 0 <br>
WEP=""<br>
NetworkType= -1 <br>
AuthMode= 2<br>
SSID=""<br>
./00:90:4B:44:85:F1<br>
RadioState=0<br>
PowerSaveMode=0<br>
frag=2346<br>
rts=2347<br>
NetworkAddress=<br>
PwrOut=100<br>
EnableAutoConnect=0<br>
WEP=<br>
NetworkType=-1<br>
SSID=<br>
gpio0=5<br>
gpio1=2<br>
gpio2=0<br>
gpio3=0<br>
scan_channel_time=-1<br>
scan_unassoc_time=-1<br>
scan_home_time=-1<br>
scan_passes=-1<br>
BadFramePreempt=0<br>
Interference_Mode=-1<br>
antdiv=-1<br>
BTCoexist=1<br>
EnableLEAP=1<br>
RoamTrigger=-70<br>
PLCPHeader=0<br>
IBSSGMode=2<br>
IBSSGProtection=2<br>
Locale=0<br>
Rate=0<br>
Channel=11<br>
LicenseOwner="schorb@kuttig.com"<br>
LicenseKey=0x0DE8FD64<br>
<br>
+ ls -lR /usr/lib/bcmwl5driverloader/.<br>
/usr/lib/bcmwl5driverloader/.:<br>
insgesamt 40<br>
-r-xr-xr-x 1 root root
26018 2003-10-13 09:13 bcmwl5webconfd<br>
-r--r--r-- 1 root root
746 2003-10-13 09:13 bcmwl5webconfd.conf<br>
-r--r--r-- 1 root root
1114 2003-10-09 05:37 config.mak<br>
-r--r--r-- 1 root root
3209 2003-10-13 09:13 LICENSE<br>
drwxr-xr-x 6 root root
400 2003-10-22 21:42 modules<br>
drwxr-xr-x 5 root root
184 2003-10-22 21:42 webconfdocs<br>
<br>
/usr/lib/bcmwl5driverloader/./modules:<br>
insgesamt 64<br>
drwxr-xr-x 2 root root
48 2003-09-26 00:42 binaries<br>
-r--r--r-- 1 root root
6976 2003-10-13 08:53 dldrpci.c<br>
drwxr-xr-x 2 root root
232 2003-10-22 21:42 GPL<br>
drwxr-xr-x 3 root root
152 2003-10-22 21:42 imported<br>
drwxr-xr-x 2 root root
144 2003-10-22 21:42 include<br>
-rwxr-xr-x 1 root root
1777 2003-10-01 00:40 kernelcompiler.sh<br>
-r--r--r-- 1 root root
5804 2003-10-03 11:50 Makefile<br>
-r--r--r-- 1 root root
1701 2003-09-30 17:49 osmemory.c<br>
-r--r--r-- 1 root root
7256 2003-10-03 06:05 osresour.c<br>
-r--r--r-- 1 root root
18713 2003-10-10 10:17 osservices.c<br>
-r--r--r-- 1 root root
4623 2003-10-10 08:41 osstdio.c<br>
-r--r--r-- 1 root root
2328 2003-10-06 11:10 osstring.c<br>
<br>
/usr/lib/bcmwl5driverloader/./modules/binaries:<br>
insgesamt 0<br>
<br>
/usr/lib/bcmwl5driverloader/./modules/GPL:<br>
insgesamt 132<br>
-r--r--r-- 1 root root
18860 2003-08-23 22:10 COPYING<br>
-r--r--r-- 1 root root
2460 2003-07-08 22:57 ieee802_11.h<br>
-r--r--r-- 1 root root
4495 2003-09-25 00:24 kcompat.h<br>
-r--r--r-- 1 root root
76691 2003-10-11 19:52 netndis.c<br>
-r--r--r-- 1 root root
5383 2003-10-01 18:28 netndis.h<br>
-r--r--r-- 1 root root
14049 2003-10-07 00:48 oscompat.h<br>
<br>
/usr/lib/bcmwl5driverloader/./modules/imported:<br>
insgesamt 40<br>
-r--r--r-- 1 root root
35716 2003-10-13 09:13 bcmwl5driverloader-i386.O<br>
drwxr-xr-x 2 root root
80 2003-10-22 21:42 include<br>
-r--r--r-- 1 root root
533 2003-10-13 09:13 makeflags.mak<br>
<br>
/usr/lib/bcmwl5driverloader/./modules/imported/include:<br>
insgesamt 16<br>
-r--r--r-- 1 root root
13374 2003-10-06 09:56 ndiswrap.h<br>
<br>
/usr/lib/bcmwl5driverloader/./modules/include:<br>
insgesamt 20<br>
-r--r--r-- 1 root root
1018 2003-10-13 09:13 dldrpci_tbl.h<br>
-r--r--r-- 1 root root
8226 2003-10-09 07:02 osservices.h<br>
-r--r--r-- 1 root root
888 2003-09-30 17:51 typedefs.h<br>
<br>
/usr/lib/bcmwl5driverloader/./webconfdocs:<br>
insgesamt 4<br>
drwxr-xr-x 2 root root
208 2003-10-22 21:42 cgi-bin<br>
drwxr-xr-x 2 root root
168 2003-10-22 21:42 images<br>
drwxr-xr-x 2 root root
176 2003-10-22 21:42 includes<br>
-r--r--r-- 1 root root
94 2003-10-03 06:29 index.html<br>
<br>
/usr/lib/bcmwl5driverloader/./webconfdocs/cgi-bin:<br>
insgesamt 32<br>
-r-xr-xr-x 1 root root
10744 2003-10-10 18:50 config.cgi<br>
-r-xr-xr-x 1 root root
1888 2003-10-10 10:28 fileupload.cgi<br>
-r-xr-xr-x 1 root root
11887 2003-10-10 11:01 parse.cgi<br>
-r-xr-xr-x 1 root root
1665 2003-10-10 01:13 saveconfig.cgi<br>
<br>
/usr/lib/bcmwl5driverloader/./webconfdocs/images:<br>
insgesamt 20<br>
-r--r--r-- 1 root root
253 2003-10-06 10:27 blink.gif<br>
-r--r--r-- 1 root root
189 2003-10-06 10:27 info.gif<br>
-r--r--r-- 1 root root
9807 2003-10-06 10:27 linuxant.gif<br>
<br>
/usr/lib/bcmwl5driverloader/./webconfdocs/includes:<br>
insgesamt 12<br>
-r--r--r-- 1 root root
115 2003-10-13 09:13 config.inc<br>
-r--r--r-- 1 root root
289 2003-10-03 20:46 footer.inc<br>
-r--r--r-- 1 root root
612 2003-10-03 21:05 header.inc<br>
<br>
+ dmesg<br>
device 80x25<br>
Calibrating delay loop... 4325.37 BogoMIPS<br>
Memory: 449168k/458176k available (1590k kernel code, 8620k reserved, 605k
data, 160k init, 0k highmem)<br>
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)<br>
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)<br>
Mount cache hash table entries: 512 (order: 0, 4096 bytes)<br>
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)<br>
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)<br>
CPU: Trace cache: 12K uops, L1 D cache: 8K<br>
CPU: L2 cache: 512K<br>
Intel machine check architecture supported.<br>
Intel machine check reporting enabled on CPU#0.<br>
CPU: After generic, caps: bfebf9ff 00000000 00000000 00000000<br>
CPU: Common caps: bfebf9ff 00000000
00000000 00000000<br>
CPU: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz stepping 09<br>
Enabling fast FPU save and restore... done.<br>
Enabling unmasked SIMD FPU exception support... done.<br>
Checking 'hlt' instruction... OK.<br>
POSIX conformance testing by UNIFIX<br>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)<br>
mtrr: detected mtrr type: Intel<br>
ACPI: Subsystem revision 20030619<br>
PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=3<br>
PCI: Using configuration type 1<br>
Looking for DSDT in initrd ... not found!<br>
ACPI: Interpreter enabled<br>
ACPI: Using PIC for interrupt routing<br>
ACPI: System [ACPI] (supports S0 S3 S4 S5)<br>
ACPI: PCI Root Bridge [PCI0] (00:00)<br>
PCI: Probing PCI hardware (bus 00)<br>
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]<br>
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]<br>
ACPI: PCI Interrupt Link [LNK0] (IRQs 7 10)<br>
ACPI: PCI Interrupt Link [LNK1] (IRQs 7 *10)<br>
ACPI: PCI Interrupt Link [LNK2] (IRQs *10)<br>
ACPI: PCI Interrupt Link [LNK3] (IRQs *10)<br>
ACPI: PCI Interrupt Link [LNK4] (IRQs 7 11)<br>
ACPI: PCI Interrupt Link [LNK5] (IRQs 7 *11)<br>
ACPI: PCI Interrupt Link [LNK6] (IRQs 10)<br>
ACPI: PCI Interrupt Link [LNK7] (IRQs *5)<br>
ACPI: PCI Interrupt Link [LNK8] (IRQs 10)<br>
ACPI: Embedded Controller [EC0] (gpe 24)<br>
schedule_task(): keventd has not started<br>
PCI: Probing PCI hardware<br>
ACPI: PCI Interrupt Link [LNK8] enabled at IRQ 10<br>
00:00:02[A] -> IRQ 10 Mode 1 Trigger 1<br>
ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 10<br>
PIC: IRQ (10) already programmed<br>
ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 5<br>
00:00:06[A] -> IRQ 5 Mode 1 Trigger 1<br>
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10<br>
PIC: IRQ (10) already programmed<br>
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 10<br>
PIC: IRQ (10) already programmed<br>
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10<br>
PIC: IRQ (10) already programmed<br>
PIC: IRQ (10) already programmed<br>
PIC: IRQ (10) already programmed<br>
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 11<br>
00:00:0e[C] -> IRQ 11 Mode 1 Trigger 1<br>
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11<br>
PIC: IRQ (11) already programmed<br>
PIC: IRQ (11) already programmed<br>
PIC: IRQ (11) already programmed<br>
ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10<br>
PIC: IRQ (10) already programmed<br>
PCI: No IRQ known for interrupt pin A of device 00:10.0<br>
PCI: Using ACPI for IRQ routing<br>
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'<br>
Linux NET4.0 for Linux 2.4<br>
Based upon Swansea University Computer Society NET3.039<br>
Initializing RT netlink socket<br>
apm: BIOS not found.<br>
PISCH: Plug In Scheduler Interface (Version 6)<br>
Starting kswapd<br>
bigpage subsystem: allocated 0 bigpages (=0MB).<br>
kinoded started<br>
VFS: Disk quotas vdquot_6.5.1<br>
aio_setup: num_physpages = 28636<br>
aio_setup: sizeof(struct page) = 48<br>
vesafb: framebuffer at 0xd8000000, mapped to 0xdc81c000, size 65472k<br>
vesafb: mode is 1024x768x16, linelength=2048, pages=41<br>
vesafb: protected mode interface info at c000:51bf<br>
vesafb: scrolling: redraw<br>
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0<br>
bootsplash 3.0.9-2003/09/08: looking for picture.... silenjpeg size 22326
bytes, found (1024x768, 11098 bytes, v3).<br>
bootsplash: silent jpeg found.<br>
bootsplash: silent jpeg found.<br>
Console: switching to colour frame buffer device 118x38<br>
fb0: VESA VGA frame buffer device<br>
pty: 256 Unix98 ptys configured<br>
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled<br>
ttyS00 at 0x03f8 (irq = 4) is a 16550A<br>
ttyS01 at 0x02f8 (irq = 3) is a 16550A<br>
PCI: Enabling device 00:08.0 (0000 -> 0003)<br>
Redundant entry in serial pci_table. Please send the output of<br>
lspci -vv, this message (10b9,5457,103c,002a)<br>
and the manufacturer and name of serial board or modem board<br>
to serial-pci-info@lists.sourceforge.net.<br>
register_serial(): autoconfig failed<br>
Real Time Clock Driver v1.10e<br>
floppy0: no floppy controllers found<br>
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize<br>
loop: loaded (max 16 devices)<br>
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4<br>
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx<br>
ALI15X3: IDE controller at PCI slot 00:10.0<br>
PCI: No IRQ known for interrupt pin A of device 00:10.0<br>
ALI15X3: chipset revision 196<br>
ALI15X3: not 100% native mode: will probe irqs later<br>
ide0: BM-DMA at 0x2840-0x2847, BIOS settings: hda:DMA, hdb:pio<br>
ide1: BM-DMA at 0x2848-0x284f, BIOS settings: hdc:pio, hdd:pio<br>
hda: FUJITSU MHT2030AT, ATA DISK drive<br>
blk: queue c03bf900, I/O limit 4095Mb (mask 0xffffffff)<br>
hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, ATAPI CD/DVD-ROM drive<br>
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14<br>
ide1 at 0x170-0x177,0x376 on irq 15<br>
hda: attached ide-disk driver.<br>
hda: host protected area => 1<br>
hda: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=3648/255/63, UDMA(100)<br>
ide-floppy driver 0.99.newide<br>
Partition check:<br>
hda: hda1 hda2 hda3<br>
ide-floppy driver 0.99.newide<br>
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27<br>
md: Autodetecting RAID arrays.<br>
md: autorun ...<br>
md: ... autorun DONE.<br>
NET4: Linux TCP/IP 1.0 for NET4.0<br>
IP Protocols: ICMP, UDP, TCP, IGMP<br>
IP: routing cache hash table of 4096 buckets, 32Kbytes<br>
TCP: Hash tables configured (established 32768 bind 65536)<br>
Linux IP multicast router 0.06 plus PIM-SM<br>
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.<br>
cryptoapi: loaded<br>
RAMDISK: Compressed image found at block 0<br>
Freeing initrd memory: 277k freed<br>
VFS: Mounted root (ext2 filesystem).<br>
reiserfs: found format "3.6" with standard journal<br>
reiserfs: enabling write barrier flush mode<br>
reiserfs: using ordered data mode<br>
reiserfs: checking transaction log (device ide0(3,3)) ...<br>
for (ide0(3,3))<br>
Using r5 hash to sort names<br>
VFS: Mounted root (reiserfs filesystem) readonly.<br>
Trying to move old root to /initrd ... failed<br>
Unmounting old root<br>
Trying to free ramdisk memory ... okay<br>
Freeing unused kernel memory: 160k freed<br>
md: Autodetecting RAID arrays.<br>
md: autorun ...<br>
md: ... autorun DONE.<br>
Adding Swap: 899632k swap-space (priority 42)<br>
reiserfs: enabling write barrier flush mode<br>
reiserfs: enabling write barrier flush mode<br>
NTFS driver 2.1.4a [Flags: R/O MODULE].<br>
NTFS volume version 3.1.<br>
SCSI subsystem driver Revision: 1.00<br>
hdc: attached ide-scsi driver.<br>
scsi0 : SCSI host adapter emulation for IDE ATAPI devices<br>
Vendor: HL-DT-ST Model: RW/DVD GCC-4241N Rev: 0C27<br>
Type: CD-ROM
ANSI SCSI revision: 02<br>
natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002<br>
originally by Donald Becker <becker@scyld.com><br>
http://www.scyld.com/network/natsemi.html<br>
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder<br>
eth0: NatSemi DP8381[56] at 0xe08da000, 00:0b:cd:a6:a0:48, IRQ 10.<br>
eth0: link up.<br>
eth0: Setting full-duplex based on negotiated link capability.<br>
ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org><br>
PCI: Enabling device 00:0c.0 (0010 -> 0012)<br>
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[d0006000-d00067ff]
Max Packet=[2048]<br>
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000bcd719f899c47]<br>
raw1394: /dev/raw1394 device initialized<br>
usb.c: registered new driver usbdevfs<br>
usb.c: registered new driver hub<br>
PCI: Enabling device 00:0e.2 (0010 -> 0012)<br>
ehci_hcd 00:0e.2: VIA Technologies, Inc. USB 2.0<br>
ehci_hcd 00:0e.2: irq 11, pci mem e08de800<br>
usb.c: new USB bus registered, assigned bus number 1<br>
ehci_hcd 00:0e.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jun-19/2.4<br>
hub.c: USB hub found<br>
hub.c: 4 ports detected<br>
usb-uhci.c: $Revision: 1.275 $ time 13:50:22 Sep 24 2003<br>
usb-uhci.c: High bandwidth mode enabled<br>
usb-uhci.c: USB UHCI at I/O 0x2800, IRQ 10<br>
usb-uhci.c: Detected 2 ports<br>
usb.c: new USB bus registered, assigned bus number 2<br>
hub.c: USB hub found<br>
hub.c: 2 ports detected<br>
usb-uhci.c: USB UHCI at I/O 0x2820, IRQ 10<br>
usb-uhci.c: Detected 2 ports<br>
usb.c: new USB bus registered, assigned bus number 3<br>
hub.c: USB hub found<br>
hub.c: 2 ports detected<br>
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver<br>
uhci.c: USB Universal Host Controller Interface driver v1.1<br>
mice: PS/2 mouse device common for all mice<br>
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0<br>
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray<br>
Uniform CD-ROM driver Revision: 3.12<br>
Linux Kernel Card Services 3.1.22<br>
options: [pci] [cardbus] [pm]<br>
PCI: Enabling device 00:0a.0 (0005 -> 0007)<br>
PCI: Enabling device 00:0a.1 (0000 -> 0002)<br>
Yenta IRQ list 00b8, PCI irq11<br>
Socket status: 30000006<br>
Yenta IRQ list 00b8, PCI irq11<br>
Socket status: 30000006<br>
cs: IO port probe 0x0c00-0x0cff: clean.<br>
cs: IO port probe 0x0820-0x08ff: clean.<br>
cs: IO port probe 0x0800-0x080f: clean.<br>
cs: IO port probe 0x03e0-0x04ff: excluding 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7<br>
cs: IO port probe 0x0100-0x03af: excluding 0x378-0x37f<br>
cs: IO port probe 0x0a00-0x0aff: clean.<br>
ACPI: AC Adapter [ACAD] (on-line)<br>
ACPI: Battery Slot [BAT1] (battery present)<br>
ACPI: Power Button (FF) [PWRF]<br>
ACPI: Lid Switch [LID]<br>
ACPI: Processor [CPU0] (supports C1 C2 C3, 2 performance states, 8 throttling
states)<br>
ACPI: Thermal Zone [THRM] (46 C)<br>
PCI: Enabling device 00:06.0 (0005 -> 0007)<br>
cpufreq: Intel(R) SpeedStep(TM) for this chipset not (yet) available.<br>
amd64-cpuf: version 1.00.06 - August 13, 2003<br>
amd64-cpuf: Not an AMD processor<br>
powernow: AMD processor not detected.<br>
IPsec Security Association Database (SADB): initialized.<br>
IPsec Security Policy Database (SPD): initialized.<br>
IPsec PF_KEY V2: initialized<br>
IPv6 v0.8 (usagi-cvs/IPsec6 based StS) for NET4.0<br>
IPv6 over IPv4 tunneling driver<br>
i8253 count too high! resetting..<br>
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]<br>
parport0: irq 7 detected<br>
lp0: using parport0 (polling).<br>
isapnp: Scanning for PnP cards...<br>
isapnp: No Plug & Play device found<br>
usb.c: registered new driver serial<br>
usbserial.c: USB Serial support registered for Generic<br>
usbserial.c: USB Serial Driver core v1.4<br>
mtrr: 0xd8000000,0x4000000 overlaps existing 0xd8000000,0x2000000<br>
Linux video capture interface: v1.00<br>
eth0: no IPv6 routers present<br>
bcmwl5: unable to load "/var/lib/bcmwl5driverloader/bcmwl5.sys"
(-5)<br>
eth0: remaining active for wake-on-lan<br>
eth0: link up.<br>
eth0: Setting full-duplex based on negotiated link capability.<br>
orinoco.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and
others)<br>
orinoco_pci.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au>
& Jean Tourrilhes <jt@hpl.hp.com>)<br>
eth0: no IPv6 routers present<br>
orinoco.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and
others)<br>
orinoco_pci.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au>
& Jean Tourrilhes <jt@hpl.hp.com>)<br>
orinoco.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and
others)<br>
orinoco_pci.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au>
& Jean Tourrilhes <jt@hpl.hp.com>)<br>
eth0: remaining active for wake-on-lan<br>
eth0: link up.<br>
eth0: Setting full-duplex based on negotiated link capability.<br>
eth0: no IPv6 routers present<br>
PCI: Enabling device 00:09.0 (0000 -> 0002)<br>
eth1: New link status: Disconnected (0002)<br>
OsConfigNewInstance: cannot readlink /etc/bcmwl5driverloader/config/PCI-00:09.0-14e4:4320-0e11:00e7,
errno=14<br>
eth1: MAC address 00:90:4B:44:85:F1<br>
eth1: Broadcom Wireless LAN Adapter at 00:09.0, mem:0xD0002000 to 0xD0004000
irq:10 ready<br>
eth1: New link status: Disconnected (0002)<br>
OsConfigNewInstance: cannot readlink /etc/bcmwl5driverloader/config/PCI-00:09.0-14e4:4320-0e11:00e7,
errno=14<br>
eth1: MAC address 00:90:4B:44:85:F1<br>
eth1: Broadcom Wireless LAN Adapter at 00:09.0, mem:0xD0002000 to 0xD0004000
irq:10 ready<br>
eth1: New link status: Disconnected (0002)<br>
OsConfigNewInstance: cannot readlink /etc/bcmwl5driverloader/config/PCI-00:09.0-14e4:4320-0e11:00e7,
errno=14<br>
eth1: MAC address 00:90:4B:44:85:F1<br>
eth1: Broadcom Wireless LAN Adapter at 00:09.0, mem:0xD0002000 to 0xD0004000
irq:10 ready<br>
eth1: New link status: Disconnected (0002)<br>
OsConfigNewInstance: cannot readlink /etc/bcmwl5driverloader/config/PCI-00:09.0-14e4:4320-0e11:00e7,
errno=14<br>
eth1: MAC address 00:90:4B:44:85:F1<br>
eth1: Broadcom Wireless LAN Adapter at 00:09.0, mem:0xD0002000 to 0xD0004000
irq:10 ready<br>
eth1: New link status: Disconnected (0002)<br>
OsConfigNewInstance: cannot readlink /etc/bcmwl5driverloader/config/PCI-00:09.0-14e4:4320-0e11:00e7,
errno=14<br>
eth1: MAC address 00:90:4B:44:85:F1<br>
eth1: Broadcom Wireless LAN Adapter at 00:09.0, mem:0xD0002000 to 0xD0004000
irq:10 ready<br>
eth1: New link status: Disconnected (0002)<br>
OsConfigNewInstance: cannot readlink /etc/bcmwl5driverloader/config/PCI-00:09.0-14e4:4320-0e11:00e7,
errno=14<br>
eth1: MAC address 00:90:4B:44:85:F1<br>
eth1: Broadcom Wireless LAN Adapter at 00:09.0, mem:0xD0002000 to 0xD0004000
irq:10 ready<br>
eth1: New link status: Disconnected (0002)<br>
OsConfigNewInstance: cannot readlink /etc/bcmwl5driverloader/config/PCI-00:09.0-14e4:4320-0e11:00e7,
errno=14<br>
eth1: MAC address 00:90:4B:44:85:F1<br>
eth1: Broadcom Wireless LAN Adapter at 00:09.0, mem:0xD0002000 to 0xD0004000
irq:10 ready<br>
eth1: New link status: Disconnected (0002)<br>
OsConfigNewInstance: cannot readlink /etc/bcmwl5driverloader/config/PCI-00:09.0-14e4:4320-0e11:00e7,
errno=14<br>
eth1: MAC address 00:90:4B:44:85:F1<br>
eth1: Broadcom Wireless LAN Adapter at 00:09.0, mem:0xD0002000 to 0xD0004000
irq:10 ready<br>
eth1: New link status: Disconnected (0002)<br>
OsConfigNewInstance: cannot readlink /etc/bcmwl5driverloader/config/PCI-00:09.0-14e4:4320-0e11:00e7,
errno=14<br>
eth1: MAC address 00:90:4B:44:85:F1<br>
eth1: Broadcom Wireless LAN Adapter at 00:09.0, mem:0xD0002000 to 0xD0004000
irq:10 ready<br>
eth1: New link status: Disconnected (0002)<br>
OsConfigNewInstance: cannot readlink /etc/bcmwl5driverloader/config/PCI-00:09.0-14e4:4320-0e11:00e7,
errno=14<br>
eth1: MAC address 00:90:4B:44:85:F1<br>
eth1: Broadcom Wireless LAN Adapter at 00:09.0, mem:0xD0002000 to 0xD0004000
irq:10 ready<br>
eth1: New link status: Disconnected (0002)<br>
OsConfigNewInstance: cannot readlink /etc/bcmwl5driverloader/config/PCI-00:09.0-14e4:4320-0e11:00e7,
errno=14<br>
eth1: MAC address 00:90:4B:44:85:F1<br>
eth1: Broadcom Wireless LAN Adapter at 00:09.0, mem:0xD0002000 to 0xD0004000
irq:10 ready<br>
eth1: New link status: Disconnected (0002)<br>
OsConfigNewInstance: cannot readlink /etc/bcmwl5driverloader/config/PCI-00:09.0-14e4:4320-0e11:00e7,
errno=14<br>
eth1: MAC address 00:90:4B:44:85:F1<br>
eth1: Broadcom Wireless LAN Adapter at 00:09.0, mem:0xD0002000 to 0xD0004000
irq:10 ready<br>
eth1: New link status: Disconnected (0002)<br>
OsConfigNewInstance: cannot readlink /etc/bcmwl5driverloader/config/PCI-00:09.0-14e4:4320-0e11:00e7,
errno=14<br>
eth1: MAC address 00:90:4B:44:85:F1<br>
eth1: Broadcom Wireless LAN Adapter at 00:09.0, mem:0xD0002000 to 0xD0004000
irq:10 ready<br>
eth1: New link status: Disconnected (0002)<br>
OsConfigNewInstance: cannot readlink /etc/bcmwl5driverloader/config/PCI-00:09.0-14e4:4320-0e11:00e7,
errno=14<br>
eth1: MAC address 00:90:4B:44:85:F1<br>
eth1: Broadcom Wireless LAN Adapter at 00:09.0, mem:0xD0002000 to 0xD0004000
irq:10 ready<br>
ip_tables: (C) 2000-2002 Netfilter core team<br>
</font>
<br>
<br><font size=2 face="sans-serif">#########################################################################################################################</font>
<br>
<br>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td width=40%><font size=1 face="sans-serif"><b>Linuxant support <support@linuxant.com></b>
</font>
<p><font size=1 face="sans-serif">22.10.2003 09:47</font>
<td width=59%>
<table width=100%>
<tr>
<td>
<div align=right><font size=1 face="sans-serif">An</font></div>
<td valign=top><font size=1 face="sans-serif">schorb@kuttig.com</font>
<tr>
<td>
<div align=right><font size=1 face="sans-serif">Kopie</font></div>
<td valign=top>
<tr>
<td>
<div align=right><font size=1 face="sans-serif">Thema</font></div>
<td valign=top><font size=1 face="sans-serif">Linuxant activated license
details</font></table>
<br>
<table>
<tr valign=top>
<td>
<td></table>
<br></table>
<br>
<br>
<br><font size=2 face="Courier New">Dear Mr. Frank Schorb,<br>
<br>
Thank you for requesting an end-user license from Linuxant!<br>
<br>
We are sending you this email to confirm the details of the license that<br>
you recently activated.<br>
<br>
Product name: DriverLoader 30-day trial license for end-users<br>
Email address: schorb@kuttig.com<br>
Registration ID: 00:90:4B:44:85:F1<br>
License key: 0D-E8-FD-64-75-AD<br>
<br>
Please contact us if you have any problems with your license or the software.<br>
<br>
Linuxant support team<br>
www.linuxant.com<br>
support@linuxant.com<br>
<br>
</font>
<br>