[hcflinux] RE: Yet another NO DIALTONE Problem

[Phil Mitchell]

I have loaded the latest driver (02042500) but this does not solve the 
problem.

As no-one else seems to have this problem, I am begining to suspect that it 
may be a kernel problem (2.4.13) 
but I can't see how.

Regards
Phil

>I have tried the advice in the FAQ but it does not help.
>
>In detail:
>
>1)	During module loading the following message is enter into the system 
>log. (I have traced this to HCFENGINE but because I don't have access to 
>the source, I can't determine the actual condition that generates this):
>
>	"m.n DM: CWCID is disconnected or no configuration found" where m & n are 
>variable numbers (may be a resource id)
>
>2)	MINICOM can successfully send commands to the modem and get the 
>expected 
>response. The exception to this is AT+PCW which returns "ERROR".
>
>3)	ATDT**** elicits a "NO DIALTONE" response after about 7 secs.
>
>4)	After ATX3, ATDT*** seizes the line and dials. Although the line is 
>off-hook, there is no response ring tones, modem tones, etc. (I have 
>determined this by picking up the phone, absolute silence). This 
>eventually 
>times out and the modem returns a "NO CARRIER" message.
>
>5)	Loopback testing (AT&T1) connects at 30667.
>
>Please note the modem works perfectly under windows, connecting above 40K.
>
>hcfconfig -i returns:
>--------------------------
>Linux HCF controllerless modem drivers, version 0.9mbsibeta02041300
>Current HCF configuration:
>	Country name: "UK", T.35 code: 00B4
>	PCI Modem vendor-id: 14F1, device-id: 1033
>	PCI Modem subvendor-id: 1092, subdevice-id: 0AC8
>	Driver inf filename: /etc/hcf/inf/genHCF.inf
>--------------------------
>
>I have run out of ideas on what to try next. Anyone any ideas.
>
>Regards
>Phil