[hcflinux] No Carrier signal woes

[Edward Hoohenkerk]

Hi,
have you tried running rc config in yast2 and filled in /dev/ttySHCF0
in -hardware-modem- ?
Try changing the sym link in yast2-modem config-hardware- to the actual name
of the modem (/dev/ttySHCF0).
good luck
Edward
----- Original Message -----
From: "Pedja" <predivan at ptt.yu>
To: <hcflinux at lists.mbsi.ca>
Sent: Friday, May 10, 2002 2:43 AM
Subject: Re: [hcflinux] No Carrier signal woes


> DP> I've got to the stage where the modem is recognised by my linux, have
disabled dial tone detection, and it dials the required number, but all that
happens is the 'no carrier' signal gets sent
> DP> back to me :/  As far as i know, everything is set up correctly, such
as country etc. i've read through the archive, but havent found anything
that has helped with this problem, so i am assuming
> DP> that my particular modem is not supported yet.
>
> DP> Anyways, just incase anyone out there has had more luck with this than
me, here is my modem info :-
>
> DP> PCI CONFIGURATION INFORMATION READ:
> DP>      VENDOR ID            : 14F1
> DP>      DEVICE ID              : 1033
> DP>      SUBVENDOR ID     : 1092
> DP>      SUBDEVICE ID       : 0AC8
> DP>      REVISION ID           : 08
>
> DP>   DEDUCED INFORMATION:
> DP>      VENDOR NAME            : CONEXANT
> DP>      DEVICE NAME            : HCF P85 DATA/FAX
> DP>      SUBVENDOR NAME         : SONIC BLUE
> DP>      MODEM TYPE             : HCF
> DP>      WINXP INBUILD SUPPORT  : YES
>
> DP> I'm also running SuSE 7.3
>
> DP> Thanks for any help anyone can provide.
>
>
> Same  thing  happens  to  me.I've  tried  all versions of
drivers,including last
> one,country settings etc.and the probem stays-NO CARRIER...argh
>
> modem  is  Diamond Supra VCC (Conexant HCF P85 data/fax).
>
> + hcfconfig --info
> Linux HCF controllerless modem drivers, version 0.92mbsibeta02050600
> Current HCF configuration:
>         Country name: "ITALY", T.35 code: 0059
>         PCI Modem vendor-id: 14F1, device-id: 1033
>         PCI Modem subvendor-id: 1092, subdevice-id: 0AC8
>         Driver inf filename: /etc/hcf/inf/linux_generic_hcf.inf
> linux-i686(i686)-2.4.8 Mandrake-8.1
>
>    There's a slight difference between id's ,though.
>    modemlist gives this 14F1-1033-1092-0AC8-08 <--REVISION ID.
>
>    modem wouldn't work with generic HCF drivers that XP pro comes with,so
i used
>    drivers for win2000,and it works great.
>    I  tried  to  use  inf file from those(win 2k)drivers to get it to work
under
>    Linux,but without *.cty file it will not work.
>    I  COULD  write  .cty  for  this...right?
>
>
>                Pedja.
>
>
>
> _______________________________________________
> hcflinux mailing list
> hcflinux at lists.mbsi.ca
> http://www.mbsi.ca/mailman/listinfo/hcflinux
>