[hcflinux] still no connection (127a:1002)

[Edward Hoohenkerk]

Hi Thomas,

I see you use suse.
Try in yast2-system-rc_config-hardware-modem, to set the modem to:
/dev/ttySHCF0.
greetings,
Edward
----- Original Message -----
From: "Thomas Lichtenstein" <TLichtenstein at t-online.de>
To: <hcflinux at lists.mbsi.ca>
Sent: Sunday, May 19, 2002 11:13 PM
Subject: Re: [hcflinux] still no connection (127a:1002)


> Hi folks,
>
> Many thanks for your great efforts, Marc!
>
>
>
> I have the same problem as Stelios:
> My 127A:1003 is correctly installed and
> will be initialized on my SuSE 8.0 box.
> But there won't be any sounds, only
> error message: "no dialtone".
> As Stelios also did, i added a X3 command.
> Now the modem did dial, but got a 'no carrier'
> after a few seconds.
>
> Greetings,
> Thomas
>
> ----- Original Message -----
> From: "Stelios Plainiotis" <plainstyle at btopenworld.com>
> To: <hcflinux at lists.mbsi.ca>
> Sent: Sunday, May 19, 2002 9:18 PM
> Subject: [hcflinux] still no connection (127a:1002)
>
>
> > Dear Marc,
> >
> > Thank you very much for your work!
> >
> > I have a Diamond Supra Express 56 i Pro (127a:1002).
> > I tried the last beta hcf driver and:
> > - I can't get any sound at all (i've checked the commands and they are
ok)
> > - I got a "no dialtone" message even if the country was configured
> correcty
> > (UK)
> > - When i fixed the "no dialtone" (added x3) I got a "no carrier",
> > - or I doesn't dial at all.
> > rgrds,
> > stelios
> >
> >
> > _______________________________________________
> > hcflinux mailing list
> > hcflinux at lists.mbsi.ca
> > http://www.mbsi.ca/mailman/listinfo/hcflinux
>
> _______________________________________________
> hcflinux mailing list
> hcflinux at lists.mbsi.ca
> http://www.mbsi.ca/mailman/listinfo/hcflinux
>