[hcflinux] 127A/1005 Connection problems

[Marc Boucher]

Hi Sebastien,

You are confusing 1005 with 1025 or perhaps 2005.

127a:1005 is HCF.

Marc

On Thu, Nov 21, 2002 at 09:11:18PM +0100, Sebastien Fievet wrote:
> Hello,
> 
> correct me if i'am wrong, but i think your modem is a HSF one... and not a HCF.
> Something like this lies around the FAQ on Marc's web page.
> Old HCF modems (Vendor ID: 127A  Device ID: 1005) should be driven as HSF
> modems.
> 
> Regards Sebastien.
> 
> On Wed, 20 Nov 2002 21:03:15 +1000
> "Howard & Shona" <hseban at tpg.com.au> wrote:
> 
> > OK, I have tried Wvdial, but found that it only scans the serial ports for
> > devices. Is it possible to detect a PCI modem with this, or is that manual?
> > 
> > Regards
> > Howard
> > 
> >  ----- Original Message -----
> > > From: Howard & Shona
> > > To: hcflinux at lists.mbsi.ca
> > > Sent: Thursday, November 14, 2002 8:45 PM
> > > Subject: 127A/1005 Connection problems
> > >
> > >
> > > Hi all,
> > > I have been trying to make the jump to Linux for some time now, but my
> > main
> > > stumbling block being my HCF modem.
> > >
> > > It is recognized as a Vendor ID: 127A  Device ID: 1005   Sub Vendor ID:
> > 122D
> > > Sub Device ID: 4008
> > >
> > > I'm running Mandrake 9 and have loaded the latest rpm for this distro.
> > >
> > > Using Kppp (and Gppp) it would seem to be able to recogize the modem
> > (Modem
> > > device:  /dev/modem)
> > > When the flow control is set to 'Xon/off'  or 'None' and when I use the
> > ATI
> > > query it recognises the modem, but brings back the dialog box with blank
> > > values against all the ATI values.
> > >
> > > If I try to connect with any combination of the avilable settings the best
> > I
> > > get is a message of "Modem ready" no dial tone or squawks. After waiting a
> > > minute or more I kill it.
> > >
> > > I know that in windows I had to turn off the 'Wait for dial tone' button,
> > > however that doesn't seem to make a difference.
> > >
> > > Any Ideas / help please.
> > >
> > > Thanks
> > > Howard Eban