[hcflinux] Support for my modem (error loading linuxant driver)
Damien Guihal
dguihal at free.fr
Sat Apr 26 17:06:07 EDT 2003
Hi all,
I own a Olitec ADSL/v92 ready modem card based on connexant chips.
When I try to load the latest drivers from linuxant
(hcfpcimodem-0.99lnxtbeta03041800k2.4.21_0.13mdk-1mdk.i586.rpm) I got an
error message (joined with this message).
I also join the results of the lspci -vvv and lspci -n.
I must also say that I run a freshly installed Mandrake 9.1
best regards
Damien GUIHAL
Nantes, France
-------------- next part --------------
PCI: Found IRQ 12 for device 00:09.1
PCI: Sharing IRQ 12 with 00:09.0
PCI: Sharing IRQ 12 with 00:09.2
PCI: Sharing IRQ 12 with 00:0d.0
HCF ASIC ID: 210
Unable to handle kernel paging request at virtual address d0baf050
printing eip:
d0a75f2d
*pde = 0ff33067
*pte = 00000000
Oops: 0000
hcfpciserial hcfpciengine hcfpciosspec mga agpgart lp parport_pc parport snd-seq-midi snd-opl3-synth snd-seq-instr snd-seq-midi-emul snd-ainstr-fm snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-cmipci snd-pcm snd-page-alloc snd-opl3-lib snd-timer snd-hwdep snd-mpu401-uart snd-rawmidi snd-seq-device snd soundcore nfsd af_packet sr_mod cdrom floppy via-rhine mii nls_cp850 vfat fat nls_iso8859-15 ntfs supermount rtc xfs sd_mod aic7xxx scsi_mod
CPU: 0
EIP: 0010:[<d0a75f2d>] Tainted: P
EFLAGS: 00010296
EIP is at $E$GDtT6AnAB0WbR/VCY74=+0xd/0x64 [hcfpciengine]
eax: d0baf050 ebx: d0b41a80 ecx: d0b41a80 edx: 00000000
esi: d0b499f8 edi: 00000000 ebp: d0b41a80 esp: c7681c24
ds: 0018 es: 0018 ss: 0018
Process insmod (pid: 2310, stackpage=c7681000)
Stack: 00001db7 c7681c44 c011c8c6 d0a75e71 d0b41a80 0000000c c12de000 d0a760b9
00000000 00000002 00000000 d0b41a80 d0b499f8 00000000 00000000 d0a6c023
d0b41a80 00000002 00000000 00000008 0000003d 0100000c d0b499f8 d0a8cb03
Call Trace:
[<c011c8c6>] call_console_drivers+0x56/0x100 [kernel]
[<d0a75e71>] $E$GDtT7hfAClqSRPhJa76F+0x11/0x98 [hcfpciengine]
[<d0a760b9>] $E$GDtT/hHBBVq/c/lEZL6lCjo=+0x21/0x2c [hcfpciengine]
[<d0a6c023>] $E$CgV86hLMB227SfpPZric+0x8f/0xbc [hcfpciengine]
[<d0a8cb03>] $E$DztKyCDGEEesROJI+0x1f/0x88 [hcfpciengine]
[<d0a8c216>] $E$DztKyD7mC0CuV/lB+0x2e/0x208 [hcfpciengine]
[<d0a6bd0d>] $E$CgV86gLRDVi7UfNlZqmTGDz0aw==+0x121/0x134 [hcfpciengine]
[<d0a6b203>] $E$Ci1V5gbXO36XZvlDc6mYAw==+0xab/0xec [hcfpciengine]
[<d0b3c300>] hcf_reg+0x0/0x3c [hcfpciserial]
[<d0aa207f>] $E$HTxC2RX3DUC9YfNZYriDAC8=+0x5b/0x204 [hcfpciengine]
[<d0aa0626>] $E$DSlPxzHXC0moQOVeRLSZGy/pYg==+0x5a/0x1cc [hcfpciengine]
[<d0aa4fd1>] $E$Ay1O5gbXJUK2SvU=+0x101/0x18c [hcfpciengine]
[<d0a48458>] $E$HS1Q2AjKCmO9V9VCaa+FADE=+0x6c/0xa80 [hcfpciengine]
[<d0b3c300>] hcf_reg+0x0/0x3c [hcfpciserial]
[<d0aa811b>] $E$HBxuzBPmFku7UfNsdKKZDB7nYuI=+0x1b/0xac [hcfpciengine]
[<d0b3c300>] hcf_reg+0x0/0x3c [hcfpciserial]
[<d0a6f64d>] $E$AiFNzizKCkeuSuRid76Z+0x79/0xec [hcfpciengine]
[<d0a6b659>] $E$CgV84g/MEA==+0x151/0x19c [hcfpciengine]
[<d0a6a0cd>] $E$Ci1V5gbXO2GqQPg=+0xb5/0xe4 [hcfpciengine]
[<d0b3c300>] hcf_reg+0x0/0x3c [hcfpciserial]
[<d0a4758c>] $E$DSdO6BXXCHGVVfND+0x12c/0x168 [hcfpciengine]
[<d0b3c280>] hcf_ports+0x0/0x64 [hcfpciserial]
[<d0b37989>] hcf_request_port+0x115/0x138 [hcfpciserial]
[<d0b37368>] hcf_event_handler+0x0/0x29c [hcfpciserial]
[<d0b3c280>] hcf_ports+0x0/0x64 [hcfpciserial]
[<d0b3c280>] hcf_ports+0x0/0x64 [hcfpciserial]
[<d0b379cd>] hcf_config_port+0x21/0x34 [hcfpciserial]
[<d0b3c280>] hcf_ports+0x0/0x64 [hcfpciserial]
[<c0129a52>] pm_register+0x22/0x80 [kernel]
[<d0b3c280>] hcf_ports+0x0/0x64 [hcfpciserial]
[<d0b3c280>] hcf_ports+0x0/0x64 [hcfpciserial]
[<d0b3a03f>] uart_setup_port+0xf7/0xfc [hcfpciserial]
[<d0b3c280>] hcf_ports+0x0/0x64 [hcfpciserial]
[<d0b39f00>] uart_pm+0x0/0x48 [hcfpciserial]
[<d0a472b7>] $E$DSdO6BXXCHGZV/NMc74=+0x247/0x25c [hcfpciengine]
[<d0b3d360>] hcf_tty_driver_normal+0x0/0xc0 [hcfpciserial]
[<d0b3d3a0>] hcf_tty_driver_normal+0x40/0xc0 [hcfpciserial]
[<d0b3a2a5>] uart_register_driver+0x261/0x2e8 [hcfpciserial]
[<d0b3c300>] hcf_reg+0x0/0x3c [hcfpciserial]
[<d0b3d43c>] hcf_tty_driver_callout+0x1c/0xbc [hcfpciserial]
[<d0b3d37c>] hcf_tty_driver_normal+0x1c/0xc0 [hcfpciserial]
[<d0b3d420>] hcf_tty_driver_callout+0x0/0xbc [hcfpciserial]
[<d0b37b27>] init_module+0x9f/0x1a0 [hcfpciserial]
[<d0b3c300>] hcf_reg+0x0/0x3c [hcfpciserial]
[<d0b37b14>] init_module+0x8c/0x1a0 [hcfpciserial]
[<c011d8f8>] sys_init_module+0x508/0x650 [kernel]
[<d0b3b380>] __ksymtab+0x0/0x20 [hcfpciserial]
[<d0b3b3a0>] .kmodtab+0x0/0x18 [hcfpciserial]
[<d0b37060>] hcf_sched_intr+0x0/0x40 [hcfpciserial]
[<c0109093>] system_call+0x33/0x40 [kernel]
Code: 8a 10 8b 81 e0 01 00 00 8b 80 48 20 00 00 3d ac 00 00 00 74
-------------- next part --------------
00:00.0 Class 0600: 10b9:1541 (rev 04)
00:01.0 Class 0604: 10b9:5243 (rev 04)
00:03.0 Class 0680: 10b9:7101
00:07.0 Class 0601: 10b9:1533 (rev c3)
00:09.0 Class 0880: 14f1:1620 (rev 02)
00:09.1 Class 0780: 14f1:1621 (rev 02)
00:09.2 Class 0203: 14f1:1622 (rev 02)
00:0b.0 Class 0100: 9005:0080 (rev 02)
00:0c.0 Class 0200: 1106:3043 (rev 06)
00:0d.0 Class 0401: 13f6:0111 (rev 10)
00:0f.0 Class 0101: 10b9:5229 (rev c1)
01:00.0 Class 0300: 102b:0521 (rev 01)
-------------- next part --------------
00:00.0 Host bridge: ALi Corporation M1541 (rev 04)
Subsystem: ALi Corporation ALI M1541 Aladdin V/V+ AGP System Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [b0] AGP version 1.0
Status: RQ=29 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=29 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
00:01.0 PCI bridge: ALi Corporation M1541 PCI to AGP Controller (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000e000-0000dfff
Memory behind bridge: df000000-dfffffff
Prefetchable memory behind bridge: e6f00000-e7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:03.0 Bridge: ALi Corporation M7101 PMU
Subsystem: ALi Corporation ALI M7101 Power Management Controller
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV] (rev c3)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort+ >SERR- <PERR-
Latency: 0
00:09.0 System peripheral: Conexant: Unknown device 1620 (rev 02)
Subsystem: OLITEC: Unknown device 1000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 12
BIST result: 00
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=64]
Region 1: Memory at dd800000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.1 Communication controller: Conexant: Unknown device 1621 (rev 02)
Subsystem: OLITEC: Unknown device 1001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 12
Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=256]
Region 1: Memory at dc800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.2 ATM network controller: Conexant: Unknown device 1622 (rev 02)
Subsystem: OLITEC: Unknown device 1002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 12
Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=128]
Region 1: Memory at db800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
Subsystem: Adaptec 29160N Ultra160 SCSI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (10000ns min, 6250ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
BIST result: 00
Region 0: I/O ports at d800 [disabled] [size=256]
Region 1: Memory at db000000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.0 Ethernet controller: VIA Technologies, Inc. VT86C100A [Rhine] (rev 06)
Subsystem: D-Link System Inc DFE-530TX rev A
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (29500ns min, 38000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d400 [size=128]
Region 1: Memory at da800000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=64K]
00:0d.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: Hercules: Unknown device a000
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at d000 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 IDE interface: ALi Corporation M5229 IDE (rev c1) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at b800 [size=16]
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 01) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. MGA-G200 AGP
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (4000ns min, 8000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e7000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at df800000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at df000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at e6ff0000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [f0] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=29 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
More information about the hcflinux
mailing list