[hcflinux] Drivers not loading...

[Fabrice Parisot]

Hello,


I have been trying to install my modem for a week now and apparently the
driver is not loading correctly. My modem information is : 14F1 1610
(1611). My linux ditribution is Mandrake 9.1.

After installing the drivers (the ones for Mandrake 9.1, kernel 2.4.21),
it told me that everything was ok and that
/dev/ttySHCF0 should have been created. But it does not exist.

I looked at the faq and I tried the "modprobe hcfpciserial" and then
dmesg. I have apparently an error when the drivers are loading but I
don't know what is happening.

I would really appreciate any help.

Regards

Fabrice

PS : I tried with the hsf drivers too because I was not sure it was an
hcf modem but the hsfpciconfig told me my modem was probably HCF. Anyway
none of these drivers are loading on my computer.

PPS : here is the result of the dmesg command :


**************************************************************************

HCF ASIC ID: 215
Unable to handle kernel paging request at virtual address d2ba7050
 printing eip:
d2c8d0f9
*pde = 012e7067
*pte = 00000000
Oops: 0000
hcfpciserial hcfpciengine hcfpciosspec nls_cp850 vfat fat sd_mod scsimon
usb-storage binfmt_misc parport_pc lp parport ipt_TOS ipt_LOG ipt_REJECT
ipt_state iptable_mangle ip_nat_irc ip_nat_ftp iptable_nat
ip_conntrack_irc ip_conntrack_ftp ip_conntrack iptable_filter ip_tables
snd-seq-midi snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss
snd-mixer-oss snd-via82xx snd-ac97-codec snd-pcm snd-timer
snd-mpu401-uart snd-rawmidi snd-seq-device snd-page-alloc snd soundcore
nfsd af_packet floppy 8139too mii ntfs supermount nls_iso8859-15 isofs
zlib_inflate sr_mod ide-cd cdrom ide-scsi scsi_mod usb-uhci usbcore rtc
ext3 jbd
CPU:    0
EIP:    0010:[<d2c8d0f9>]    Tainted: P
EFLAGS: 00210296
EIP is at $E$GDtT6AnAB0WbR/VCY74=+0xd/0x64 [hcfpciengine]
eax: d2ba7050   ebx: d2d50a80   ecx: d2d50a80   edx: 00000000
esi: d2d58a08   edi: 00000000   ebp: d2d50a80   esp: c5aa9c24
ds: 0018   es: 0018   ss: 0018
Process insmod (pid: 3983, stackpage=c5aa9000)
Stack: d2d54328 c5aa9c70 00000004 d2c8d03d d2d50a80 d2d50934 d2d52c04
d2c8d285
       00000000 00000002 00000000 d2d50a80 d2d58a08 00000000 00000000
d2c831df
       d2d50a80 00000002 00000000 00000008 c5aa9c9c c0110624 d2d58a08
d2ca401b
Call Trace:
 [<d2c8d03d>] $E$GDtT7hfAClqSRPhJa76F+0x11/0x98 [hcfpciengine]
 [<d2c8d285>] $E$GDtT/hHBBVq/c/lEZL6lCjo=+0x21/0x2c [hcfpciengine]
 [<d2c831df>] $E$CgV86hLMB227SfpPZric+0x8f/0xbc [hcfpciengine]
 [<c0110624>] pci_conf1_read_config_byte+0x34/0x40 [kernel]
 [<d2ca401b>] $E$DztKyCDGEEesROJI+0x1f/0x88 [hcfpciengine]
 [<d2ca372e>] $E$DztKyD7mC0CuV/lB+0x2e/0x208 [hcfpciengine]
 [<d2c82eb1>] $E$CgV86gLRDVi7UfNlZqmTGDz0aw==+0x121/0x134 [hcfpciengine]
 [<d2c823a7>] $E$Ci1V5gbXO36XZvlDc6mYAw==+0xab/0xec [hcfpciengine]
 [<d284e380>] hcf_reg+0x0/0x3c [hcfpciserial]
 [<d2cb92fb>] $E$HTxC2RX3DUC9YfNZYriDAC8=+0x5b/0x204 [hcfpciengine]
 [<d2cb78a2>] $E$DSlPxzHXC0moQOVeRLSZGy/pYg==+0x5a/0x1cc [hcfpciengine]
 [<d2cbc3a9>] $E$Ay1O5gbXJUK2SvU=+0x101/0x18c [hcfpciengine]
 [<d2c5f4c0>] $E$HS1Q2AjKCmO9V9VCaa+FADE=+0x6c/0xa80 [hcfpciengine]
 [<d284e380>] hcf_reg+0x0/0x3c [hcfpciserial]
 [<d2cbf4f3>] $E$HBxuzBPmFku7UfNsdKKZDB7nYuI=+0x1b/0xac [hcfpciengine]
 [<d284e380>] hcf_reg+0x0/0x3c [hcfpciserial]
 [<d2c86809>] $E$AiFNzizKCkeuSuRid76Z+0x79/0xec [hcfpciengine]
 [<d2c827fd>] $E$CgV84g/MEA==+0x151/0x19c [hcfpciengine]
 [<d2c81271>] $E$Ci1V5gbXO2GqQPg=+0xb5/0xe4 [hcfpciengine]
 [<d284e380>] hcf_reg+0x0/0x3c [hcfpciserial]
 [<d2c5e58c>] $E$DSdO6BXXCHGVVfND+0x12c/0x168 [hcfpciengine]
 [<d284e300>] hcf_ports+0x0/0x64 [hcfpciserial]
 [<d28499a5>] hcf_request_port+0x115/0x138 [hcfpciserial]
 [<d2849384>] hcf_event_handler+0x0/0x29c [hcfpciserial]
 [<d284e300>] hcf_ports+0x0/0x64 [hcfpciserial]
 [<d284e300>] hcf_ports+0x0/0x64 [hcfpciserial]
 [<d28499e9>] hcf_config_port+0x21/0x34 [hcfpciserial]
 [<d284e300>] hcf_ports+0x0/0x64 [hcfpciserial]
 [<c0129a52>] pm_register+0x22/0x80 [kernel]
 [<d284e300>] hcf_ports+0x0/0x64 [hcfpciserial]
 [<d284e300>] hcf_ports+0x0/0x64 [hcfpciserial]
 [<d284c0bb>] uart_setup_port+0xf7/0xfc [hcfpciserial]
 [<d284e300>] hcf_ports+0x0/0x64 [hcfpciserial]
 [<d284bf7c>] uart_pm+0x0/0x48 [hcfpciserial]
 [<d2c5e2b7>] $E$DSdO6BXXCHGZV/NMc74=+0x247/0x25c [hcfpciengine]
 [<d284f3e0>] hcf_tty_driver_normal+0x0/0xc0 [hcfpciserial]
 [<d284f420>] hcf_tty_driver_normal+0x40/0xc0 [hcfpciserial]
 [<d284c321>] uart_register_driver+0x261/0x2e8 [hcfpciserial]
 [<d284e380>] hcf_reg+0x0/0x3c [hcfpciserial]
 [<d284f4bc>] hcf_tty_driver_callout+0x1c/0xbc [hcfpciserial]
 [<d284f3fc>] hcf_tty_driver_normal+0x1c/0xc0 [hcfpciserial]
 [<d284f4a0>] hcf_tty_driver_callout+0x0/0xbc [hcfpciserial]
 [<d2849b43>] init_module+0x9f/0x1a0 [hcfpciserial]
 [<d284e380>] hcf_reg+0x0/0x3c [hcfpciserial]
 [<d2849b30>] init_module+0x8c/0x1a0 [hcfpciserial]
 [<c011d8f8>] sys_init_module+0x508/0x650 [kernel]
 [<d284d400>] __ksymtab+0x0/0x20 [hcfpciserial]
 [<d284d420>] .kmodtab+0x0/0x18 [hcfpciserial]
 [<d2849060>] hcf_sched_intr+0x0/0x40 [hcfpciserial]
 [<c0109093>] system_call+0x33/0x40 [kernel]

Code: 8a 10 8b 81 e0 01 00 00 8b 80 48 20 00 00 3d ac 00 00 00 74