[hcflinux] Conexant HCF linmodem is not responding to TCF

[Seshareddy Kamireddi]

hi,
I am using Conexant HCF driver on Redhat 8.0. I am trying to setup
Hylafax and getting errors. Here is the transimission log from Hylafax.
I posted this to Hylafax user group first. I got a response saying modem
is supposed to respond with 'OK' after TCF. Can somebody help me please.
Modem  is timing out after AT+FTM=145\r command.
thanks

Log of sending a fax:
Jan 02 14:13:32.13: [13009]: SESSION BEGIN 00000011 1**********
Jan 02 14:13:32.14: [13009]: HylaFAX (tm) Version 4.1.5
Jan 02 14:13:32.14: [13009]: SEND FAX: JOB 9 DEST 1-********** COMMID
00000011 DEVICE '/dev/modem'
Jan 02 14:13:32.14: [13009]: DELAY 75 ms
Jan 02 14:13:32.22: [13009]: DELAY 2600 ms
Jan 02 14:13:34.82: [13009]: DELAY 10 ms
Jan 02 14:13:34.84: [13009]: <-- [4:ATZ\r]
Jan 02 14:13:34.89: [13009]: --> [2:OK]
Jan 02 14:13:34.89: [13009]: DELAY 3000 ms
Jan 02 14:13:37.89: [13009]: <-- [5:ATX3\r]
Jan 02 14:13:37.91: [13009]: --> [4:ATX3]
Jan 02 14:13:37.91: [13009]: --> [2:OK]
Jan 02 14:13:37.91: [13009]: <-- [5:ATE0\r]
Jan 02 14:13:37.93: [13009]: --> [4:ATE0]
Jan 02 14:13:37.93: [13009]: --> [2:OK]
Jan 02 14:13:37.93: [13009]: <-- [5:ATV1\r]
Jan 02 14:13:37.94: [13009]: --> [2:OK]
Jan 02 14:13:37.94: [13009]: <-- [5:ATQ0\r]
Jan 02 14:13:37.96: [13009]: --> [2:OK]
Jan 02 14:13:37.96: [13009]: <-- [7:ATS0=0\r]
Jan 02 14:13:37.98: [13009]: --> [2:OK]
Jan 02 14:13:37.98: [13009]: <-- [7:ATS8=2\r]
Jan 02 14:13:38.00: [13009]: --> [2:OK]
Jan 02 14:13:38.00: [13009]: <-- [8:ATS7=60\r]
Jan 02 14:13:38.01: [13009]: --> [2:OK]
Jan 02 14:13:38.01: [13009]: <-- [6:AT&K3\r]
Jan 02 14:13:38.03: [13009]: --> [2:OK]
Jan 02 14:13:38.03: [13009]: <-- [6:AT&D2\r]
Jan 02 14:13:38.05: [13009]: --> [2:OK]
Jan 02 14:13:38.05: [13009]: <-- [6:AT&C1\r]
Jan 02 14:13:38.07: [13009]: --> [2:OK]
Jan 02 14:13:38.07: [13009]: <-- [12:AT+FCLASS=1\r]
Jan 02 14:13:38.08: [13009]: --> [2:OK]
Jan 02 14:13:38.08: [13009]: <-- [7:ATL1M1\r]
Jan 02 14:13:38.10: [13009]: --> [2:OK]
Jan 02 14:13:38.10: [13009]: <-- [12:AT+FCLASS=1\r]
Jan 02 14:13:38.21: [13009]: --> [2:OK]
Jan 02 14:13:38.21: [13009]: DIAL 16176937180
Jan 02 14:13:38.21: [13009]: <-- [16:ATDT**********\r]
Jan 02 14:13:54.56: [13009]: --> [7:CONNECT]
Jan 02 14:13:55.24: [13009]: --> [2:OK]
Jan 02 14:13:55.24: [13009]: REMOTE NSF "AD 00 00 79 20 A1 C8 0A 29"
Jan 02 14:13:55.24: [13009]: NSF remote fax equipment: Pitney Bowes 
Jan 02 14:13:55.24: [13009]: <-- [9:AT+FRH=3\r]
Jan 02 14:13:55.37: [13009]: --> [7:CONNECT]
Jan 02 14:13:56.19: [13009]: --> [2:OK]
Jan 02 14:13:56.19: [13009]: REMOTE NSF "00 00 09 00 60 00 98 48 B8 F0
A8 F0 48 A4 C4 98 78 A8 C4 C4 F0 F0 F0 F0 F0 F0 F0 00 00 3A"
Jan 02 14:13:56.19: [13009]: NSF remote fax equipment: Xerox/Toshiba 
Jan 02 14:13:56.19: [13009]: <-- [9:AT+FRH=3\r]
Jan 02 14:13:56.31: [13009]: --> [7:CONNECT]
Jan 02 14:13:56.88: [13009]: --> [2:OK]
Jan 02 14:13:56.88: [13009]: REMOTE CSI "**********"
Jan 02 14:13:56.88: [13009]: <-- [9:AT+FRH=3\r]
Jan 02 14:13:57.01: [13009]: --> [7:CONNECT]
Jan 02 14:13:57.21: [13009]: --> [2:OK]
Jan 02 14:13:57.21: [13009]: REMOTE best rate 33600 bit/s
Jan 02 14:13:57.21: [13009]: REMOTE max page width 1728 pixels in 215 mm
Jan 02 14:13:57.21: [13009]: REMOTE max unlimited page length 
Jan 02 14:13:57.21: [13009]: REMOTE best vres 7.7 line/mm
Jan 02 14:13:57.21: [13009]: REMOTE best format 2-D MMR
Jan 02 14:13:57.21: [13009]: REMOTE supports T.30 Annex A, ECM
Jan 02 14:13:57.21: [13009]: REMOTE best 0 ms/scanline
Jan 02 14:13:57.21: [13009]: USE 14400 bit/s
Jan 02 14:13:57.21: [13009]: USE 0 ms/scanline
Jan 02 14:13:57.21: [13009]: SEND file "docq/doc9.ps;01"
Jan 02 14:13:57.21: [13009]: USE page width 1728 pixels in 215 mm
Jan 02 14:13:57.21: [13009]: USE unlimited page length 
Jan 02 14:13:57.21: [13009]: USE 7.7 line/mm
Jan 02 14:13:57.21: [13009]: USE 1-D MR
Jan 02 14:13:57.21: [13009]: SEND training at v.17 14400 bit/s
Jan 02 14:13:57.21: [13009]: <-- [9:AT+FTH=3\r]
Jan 02 14:13:57.66: [13009]: --> [7:CONNECT]
Jan 02 14:13:57.66: [13009]: <-- data [23]
Jan 02 14:13:57.66: [13009]: <-- data [2]
Jan 02 14:13:59.37: [13009]: --> [7:CONNECT]
Jan 02 14:13:59.37: [13009]: <-- data [6]
Jan 02 14:13:59.37: [13009]: <-- data [2]
Jan 02 14:13:59.99: [13009]: --> [2:OK]
Jan 02 14:13:59.99: [13009]: <-- [9:AT+FTS=7\r]
Jan 02 14:14:00.28: [13009]: --> [2:OK]
Jan 02 14:14:00.28: [13009]: <-- [11:AT+FTM=145\r]
Jan 02 14:14:00.37: [13009]: --> [7:CONNECT]
Jan 02 14:14:00.37: [13009]: <-- data [1024]
Jan 02 14:14:00.37: [13009]: <-- data [1024]
Jan 02 14:14:00.37: [13009]: <-- data [652]
Jan 02 14:14:00.37: [13009]: <-- data [2]
Jan 02 14:14:30.37: [13009]: MODEM <Timeout>
Jan 02 14:14:30.37: [13009]: Problem sending TCF data
Jan 02 14:14:30.37: [13009]: <-- [9:AT+FRH=3\r]
Jan 02 14:14:33.47: [13009]: --> [0:]
Jan 02 14:14:33.47: [13009]: MODEM <Empty line>
Jan 02 14:14:33.47: [13009]: <-- data [1]
Jan 02 14:14:33.67: [13009]: MODEM <Timeout>
Jan 02 14:14:33.67: [13009]: DELAY 1500 ms
Jan 02 14:14:35.18: [13009]: SEND training at v.17 12000 bit/s
Jan 02 14:14:35.18: [13009]: <-- [9:AT+FTH=3\r]
Jan 02 14:14:37.73: [13009]: Error sending T.30 prologue frames
Jan 02 14:14:37.73: [13009]: SEND training at v.17 9600 bit/s
Jan 02 14:14:37.73: [13009]: <-- [9:AT+FTH=3\r]
Jan 02 14:14:40.28: [13009]: Error sending T.30 prologue frames
Jan 02 14:14:40.28: [13009]: SEND training at v.17 7200 bit/s
Jan 02 14:14:40.28: [13009]: <-- [9:AT+FTH=3\r]
Jan 02 14:14:42.83: [13009]: Error sending T.30 prologue frames
Jan 02 14:14:42.83: [13009]: SEND training at v.27ter 4800 bit/s
Jan 02 14:14:42.83: [13009]: <-- [9:AT+FTH=3\r]
Jan 02 14:14:45.38: [13009]: Error sending T.30 prologue frames
Jan 02 14:14:45.38: [13009]: SEND training at v.27ter fallback mode 2400
bit/s
Jan 02 14:14:45.38: [13009]: <-- [9:AT+FTH=3\r]
Jan 02 14:14:47.93: [13009]: Error sending T.30 prologue frames
Jan 02 14:14:47.93: [13009]: TRAINING failed
Jan 02 14:14:47.93: [13009]: <-- [9:AT+FTH=3\r]
Jan 02 14:14:50.48: [13009]: --> [0:]
Jan 02 14:14:50.48: [13009]: <-- [5:ATH0\r]
Jan 02 14:14:55.48: [13009]: MODEM <Timeout>
Jan 02 14:14:55.65: [13009]: SESSION END



-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://www.linuxant.com/pipermail/hcflinux/attachments/20030102/4d5872f8/attachment.bin