Hi, I installed Mandriva Linux on my Toshiba Satellite
P105-S6024 laptop and I'm trying to fix my modem. I'm
pretty sure it is made by Conexant, according to what
I see in Windows device manager. I downloaded and run
scanModem but it aborted abruptly:
./scanModem
>From http://limodems.technion.ac.il , get a recent
update of scanModem, if this copy was not there
obtained. There are weekly updates.
Updated on: 2007_June_19
ls: /usr/bin/gcc*: No existe el fichero o el
directorio
Identifying PCI bus slots with candidate modems.
=== Finished modem firmware and bootup diagnostics
section.
===
=== Next deducing cogent software ===
Analysing card in PCI bus 00:1b.0, writing to
scanout.00:1b.0
Modem with PCI ID 8086:27d8 is in the software
modem category.
The modem driver snd-intel8x0m is Not loaded.
To enable functional diagnostics, please either
briefly login as Root: su - root (Not for Ubuntu) and
unload and reload the modem driver
modprobe -r snd-intel8x0m
modprobe snd-intel8x0m
Exit Root status
exit and rerun ./scanModem
I followed the directions but now the program froze at
"ls: /usr/bin/gcc*:".
This is the ModemData file:
-------------------------- System information -------
---------------------
CPU=i686, Mandriva Linux release 2007.1 (Official)
for i586 Kernel 2.6.17-13mdvlegacy on a Dual-processor
i686 / Linux version 2.6.17-13mdvlegacy
(rtp at octopus.mandriva.com) (gcc version 4.1.2 20070302
(prerelease) (4.1.2-1mdv2007.1)) #1
SMP Fri Mar 23 19:05:24 UTC 2007
scanModem update of: 2007_June_19
ALSAversion 1.0.14rc2
USB modem not detected by lsusb
Modem or host audio card candidates have firmware
information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --
------------
00:1b.0 8086:27d8 1179:ff31 Audio device: Intel
Corporation 82801G
Modem interrupt assignment and sharing:
21: 170 0 IO-APIC-level HDA Intel
--- Bootup diagnositcs for card in PCI slot 00:1b.0
----
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level,
low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to
64
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
PM: Writing back config space on device 0000:00:1b.0
at offset 1 (was 100006, writing 100002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level,
low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to
64
The PCI slot 00:1b.0 of the modem card may be
disabled early in a bootup process, but then enabled
later. If modem drivers load but the modem is not
responsive, read Bootup.txt about possible fixes. Send
dmesg.txt along with ModemData.txt to
discuss at linmodems.org if help is needed.
=== Finished modem firmware and bootup diagnostics
section.
===
=== Next deducing cogent software ===
8086:27d8 is a High Definition Audio card, possibly
hosting a soft modem.
Now comes the file "scanout.00:1b.0":
PCIDEV=8086:27d8
CLASS="Class 0403: 8086:27d8"
NAME="Audio device: Intel Corporation 82801G "
Vendor=8086
Device=27d8
SUBSYS=1179:ff31
SUBNAME=" Toshiba America Info Systems AC97 Data Fax
SoftModem with SmartCP"
SUBven=1179
IRQ=21
Test="./scanModem test 8086:27d8 179:ff31"
SOFT=8086:27d8
SLMODEMD_DEVICE=modem:1
PORT="modem:1"
Driver=snd-intel8x0m
DRIVER_=snd_intel8x0m
KDRIVER=SND_NTEL8X0M
MPLACE=
I tried the ListModem utility on Windows as well but
it reported no modem found.
I'm quite sure my Modem maker is Conexant because
that's what Windows Device Manager says: "CXT". Most
driver files are also signed by Conexant.
So I know I have to download and compile some Linuxant
driver.
The problem is that before downloading the driver I
have to know whether my modem is HCF, HSF or whatever,
but neither scanModem nor ListModem helped me in that
respect.
Could somebody interpret all these data and vendor
codes to tell me what kind of modem I have?
For more information:
This is what Windows Device Manager says about my
modem:
HDAUDIO Soft Data Fax Modem with SmartCP
Location: 65535 (Internal High Definition Audio Bus)
Device Instance Id:
HDAUDIO/FUNC_02&VEN_14F1&DEV_5047&SUBSYS_1179FF31&REV_1000/4&484DAEA&0&0002
By the way, the sound card is Conexant as well:
Conexant High Definition Audio Properties
Location: 65535 (Internal High Definition Audio Bus)
Device Instance Id:
HDAUDIO/FUNC_01&VEN_14F1&DEV_5047&SUBSYS_1179FF31&REV_1000/4&484DAEA&0&0001
>From the "Query Modem" on the Control Panel I tried
what I think are the so called "ATI commands", and
copied the output from the log file:
ATQ0V1E0 - OK
AT+GMM - +GMM: HDAUDIO Soft Data Fax Modem with
SmartCP
AT+FCLASS=? - 0,1
AT#CLS=? - COMMAND NOT SUPPORTED
AT+GCI? - +GCI: A0
AT+GCI=? - +GCI:
(00,01,02,03,04,05,06,07,09,0A,0B,0C,0D,0E,0F,10,11,12,13,14,15,16,19,1A,1B,1C,1D,1E,1F,20,21,22,23,24,25,26,27,28,
29,2A,2B,2C,2D,2E,2F,30,31,32,33,34,35,36,37,38,39,3A,3B,3C,3D,3E,40,41,42,43,44,45,46,47,48,49,4B,4C,4D,4E,4F,50,
51,52,53,54,55,56,57,58,59,5A,5B,5C,5E,5F,60,61,62,63,64,5,66,67,68,69,6A,6B,6C,6D,6E,6F,70,71,72,73,74,75,76,77,7
8,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,B,8C,8D,8E,8F,90,92,93,94,96,97,98,99,9A,9B,9C,9D,9E,9F,A
0,A1,A2,A3,A4,A5,A6,A7,A8,A9,AA,AB,AC,AD,AE,AF,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C1,C2,C3,C4,C5,
C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE,DF,E0,E1,E2,E3,E4,E5,E6,E7,E8,EB,EC,ED,EE,EF,F0,F1,F2,F3,F4,F5,F7,F8,F9,FA,FB,FC,FE)
ATI1 - 255
ATI2 - OK
ATI3 - SoftK56V_B2.1_V7.35.00
ATI4 - HDAUDIO Soft Data Fax Modem with SmartCP
ATI5 - 160
ATI6 - SoftK56
CModem Version 12
Rksample Version 342
ATI7 - 255
On Mandriva, the Mandriva Control Center reports the
following:
Identificación
Fabricante: ‎Intel Corporation
Descripción: ‎82801G (ICH7 Family) High
Definition Audio
Controller
Clase de soporte: ‎Audio device
Controlador
Módulo: ‎snd-hda-intel
Conexión
Bus: ‎PCI
Bus PCI #: ‎0
Dispositivo PCI #: ‎27
Función PCI #: ‎0
ID del fabricante: ‎0x8086
ID del dispositivo: ‎0x27d8
Sub-ID del fabricante: ‎0x1179
Sub-ID del dispositivo: ‎0xff31
And finally, the output of a "lspci -v" as root:
00:1b.0 Audio device: Intel Corporation 82801G (ICH7
Family) High Definition Audio Controller (rev 02)
Subsystem: Toshiba America Info Systems AC97
Data Fax SoftModem with SmartCP
Flags: bus master, fast devsel, latency 0, IRQ
21
Memory at d0340000 (64-bit, non-prefetchable)
[size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled
Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [70] Express Unknown type IRQ 0
Can anybody make sense from this? Which driver should
I download?
____________________________________________________________________________________
¡Descubre una nueva forma de obtener respuestas a tus preguntas!
Entra en Yahoo! Respuestas.
http://es.answers.yahoo.com/info/welcome