<DIV><BR>Hello, according to your suggestion here :<BR><A href="http://www.linuxant.com/pipermail/hcflinux/2003q3/000983.html">http://www.linuxant.com/pipermail/hcflinux/2003q3/000983.html</A></DIV>
<DIV> </DIV>
<DIV>I compiled and installed my custom kernel based on the suggestions here:<BR><A href="http://www.redhat.com/docs/manuals/linux/RHL-7.3-Manual/custom-guide/ch-custom-kernel.html">http://www.redhat.com/docs/manuals/linux/RHL-7.3-Manual/custom-guide/ch-custom-kernel.html</A></DIV>
<DIV> </DIV>
<DIV>I then recompiled the riptide and hcfmodem drivers based on the same source tree<BR>and then loaded the driver modules using<BR>modprobe hcfpciserial - no warnings or errors here.</DIV>
<DIV> </DIV>
<DIV>But when I tried kppp to dial - querying the modem using kppp gives satisfactory output.<BR></DIV>
<DIV>The modem seems to work, query string ATZ gives OK but</DIV>
<DIV>1) I can't hear anything when dialing<BR>2) After a period of time, it gives the following message on log & dialer window :<BR> NO CARRIER<BR>(Country has been configured to INDIA during hcfpciconfig)</DIV>
<DIV> </DIV>
<DIV><BR>'dmesg' gave the following output :</DIV>
<DIV> </DIV>
<DIV>Linux version 2.4.18-24.8.0-MyKernel (<A href="mailto:root@localhost.localdomain">root@localhost.localdomain</A>) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #2 Fri Oct 24 02:02:36 IST 2003<BR>BIOS-provided physical RAM map:<BR> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)<BR> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)<BR> BIOS-e820: 00000000000e9400 - 0000000000100000 (reserved)<BR> BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)<BR> BIOS-e820: 000000000bff0000 - 000000000bfffc00 (ACPI data)<BR> BIOS-e820: 000000000bfffc00 - 000000000c000000 (ACPI NVS)<BR> BIOS-e820: 00000000fffe9400 - 0000000100000000 (reserved)<BR>0MB HIGHMEM available.<BR>191MB LOWMEM available.<BR>On node 0 totalpages: 49136<BR>zone(0): 4096 pages.<BR>zone(1): 45040 pages.<BR>zone(2): 0 pages.<BR>Kernel command line: ro root=LABEL=/<BR>Initializing CPU#0<BR>Detected 451.032 MHz processor.<BR>Speakup v-1.00 CVS: Tue Jun 11 14:22:53
EDT 2002 : initialized<BR>Console: colour VGA+ 80x25<BR>Calibrating delay loop... 896.66 BogoMIPS<BR>Memory: 188924k/196544k available (1315k kernel code, 5700k reserved, 990k data, 172k init, 0k highmem)<BR>Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)<BR>Inode cache hash table entries: 16384 (order: 5, 131072 bytes)<BR>Mount cache hash table entries: 4096 (order: 3, 32768 bytes)<BR>ramfs: mounted with options: <defaults><BR>ramfs: max_pages=23807 max_file_pages=0 max_inodes=0 max_dentries=23807<BR>Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)<BR>Page-cache hash table entries: 65536 (order: 6, 262144 bytes)<BR>CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0<BR>CPU: L1 I cache: 16K, L1 D cache: 16K<BR>CPU: L2 cache: 512K<BR>CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000<BR>Intel machine check architecture supported.<BR>Intel machine check reporting enabled on CPU#0.<BR>CPU: After
generic, caps: 0383f9ff 00000000 00000000 00000000<BR>CPU: Common caps: 0383f9ff 00000000 00000000 00000000<BR>CPU: Intel Pentium III (Katmai) stepping 03<BR>Enabling fast FPU save and restore... done.<BR>Enabling unmasked SIMD FPU exception support... done.<BR>Checking 'hlt' instruction... OK.<BR>POSIX conformance testing by UNIFIX<BR>mtrr: v1.40 (20010327) Richard Gooch (<A href="mailto:rgooch@atnf.csiro.au">rgooch@atnf.csiro.au</A>)<BR>mtrr: detected mtrr type: Intel<BR>PCI: PCI BIOS revision 2.10 entry at 0xfd9a4, last bus=1<BR>PCI: Using configuration type 1<BR>PCI: Probing PCI hardware<BR>PCI: Using IRQ router PIIX [8086/7110] at 00:07.0<BR>PCI: Cannot allocate resource region 4 of device 00:07.1<BR>Limiting direct PCI/PCI transfers.<BR>isapnp: Scanning for PnP cards...<BR>isapnp: No Plug & Play device found<BR>speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25)<BR>Linux NET4.0 for
Linux 2.4<BR>Based upon Swansea University Computer Society NET3.039<BR>Initializing RT netlink socket<BR>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)<BR>Starting kswapd<BR>VFS: Diskquotas version dquot_6.5.0 initialized<BR>pty: 2048 Unix98 ptys configured<BR>Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled<BR>ttyS0 at 0x03f8 (irq = 4) is a 16550A<BR>ttyS1 at 0x02f8 (irq = 3) is a 16550A<BR>Real Time Clock Driver v1.10e<BR>block: 352 slots per queue, batch=88<BR>Uniform Multi-Platform E-IDE driver Revision: 6.31<BR>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx<BR>PIIX4: IDE controller on PCI bus 00 dev 39<BR>PIIX4: chipset revision 1<BR>PIIX4: not 100% native mode: will probe irqs later<BR> ide0: BM-DMA at 0x10c0-0x10c7, BIOS settings: hda:DMA, hdb:pio<BR> ide1: BM-DMA at 0x10c8-0x10cf, BIOS settings: hdc:DMA, hdd:pio<BR>hda: ST340810A, ATA DISK
drive<BR>hdc: FX4821T, ATAPI CD/DVD-ROM drive<BR>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14<BR>ide1 at 0x170-0x177,0x376 on irq 15<BR>blk: queue c03b26c4, I/O limit 4095Mb (mask 0xffffffff)<BR>blk: queue c03b26c4, I/O limit 4095Mb (mask 0xffffffff)<BR>hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=5169/240/63, UDMA(33)<BR>ide-floppy driver 0.99.newide<BR>Partition check:<BR> hda: hda1 hda2 < hda5 > hda3 hda4<BR>Floppy drive(s): fd0 is 1.44M<BR>FDC 0 is a post-1991 82077<BR>NET4: Frame Diverter 0.46<BR>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize<BR>ide-floppy driver 0.99.newide<BR>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27<BR>md: Autodetecting RAID arrays.<BR>md: autorun ...<BR>md: ... autorun DONE.<BR>NET4: Linux TCP/IP 1.0 for NET4.0<BR>IP Protocols: ICMP, UDP, TCP, IGMP<BR>IP: routing cache hash table of 1024 buckets, 8Kbytes<BR>TCP: Hash tables configured (established 16384 bind 32768)<BR>Linux IP multicast router 0.06 plus
PIM-SM<BR>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.<BR>RAMDISK: Compressed image found at block 0<BR>Freeing initrd memory: 128k freed<BR>VFS: Mounted root (ext2 filesystem).<BR>Journalled Block Device driver loaded<BR>kjournald starting. Commit interval 5 seconds<BR>EXT3-fs: mounted filesystem with ordered data mode.<BR>Freeing unused kernel memory: 172k freed<BR>EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,3), internal journal<BR>Adding Swap: 468712k swap-space (priority -1)<BR>IA-32 Microcode Update Driver: v1.11 <<A href="mailto:tigran@veritas.com">tigran@veritas.com</A>><BR>microcode: CPU0 updated from revision 10 to 14, date=09101999<BR>microcode: freed 2048 bytes<BR>parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]<BR>ohci1394: pci_module_init failed<BR>ip_tables: (C) 2000-2002 Netfilter core team<BR>ide-floppy driver 0.99.newide<BR>hdc: ATAPI 44X CD-ROM drive, 128kB Cache<BR>Uniform CD-ROM driver Revision: 3.12<BR>YM3812 and OPL-3 driver Copyright (C) by
Hannu Savolainen, Rob Hooft 1993-1996<BR>Conexant Sound Driver v0.5lnxtbeta03042700 time 02:31:59 Oct 24 2003<BR><RIPTIDE> Init_module is completed<BR><RTLOW> version v0.5lnxtbeta03042700 time 02:31:50 Oct 24 2003<BR><RTLOW> Look for 127a 4320<6>PCI: Found IRQ 10 for device 00:0c.0<BR>PCI: Sharing IRQ 10 with 00:0c.1<BR>PCI: Sharing IRQ 10 with 01:00.0<BR> - found at io 1080 irq 10<BR><RTLOW> Start allocation of resources: cade1380<BR><RIPTIDE> Register hardware cade1380<BR><RIPTIDE> register is successful<BR><RTLOW> Resources are allocated: io 0x1080 irq 10<BR><RTLOW> Init command interface: 1080 a ccb7fe60<BR><RP_CMDIF> RipTide version before:<BR>ASIC : 3<BR>CODEC : 2<BR>AUXDSP: 3<BR>PROG : 773<BR><RP_CMDIF> Firmware size: 15597<BR><RP_CMDIF> Start RiptideLoadImage<BR><RP_CMDIF> Firmware is loaded.<BR><RP_CMDIF> RipTide version after:<BR>ASIC : 3<BR>CODEC : 2<BR>AUXDSP:
3<BR>PROG : 773<BR><RTINT> requesting io ports 0x1080-0x10bf<BR><RTLOW> Init command riptide: 1080 a ccb7fe60 c09a8680 cca1b9e0 c09a8290<BR><RTLOW> riptide FM at io ports 0x388-0x38b<BR><RTLOW> Init_module is completed: index = 0<BR>PCI: Found IRQ 10 for device 00:0c.1<BR>PCI: Sharing IRQ 10 with 00:0c.0<BR>PCI: Sharing IRQ 10 with 01:00.0<BR>HCF ASIC ID: 210<BR>HCF DATAPUMP PART: '73' REV: 'BA'<BR>1792785.651: HCF: !!!DM ERROR: tone dialing, TDBE timeout???<BR>1792891.819: HCF: !!!DM ERROR: tone dialing, TDBE timeout???<BR>1793043.735: HCF: !!!DM ERROR: tone dialing, TDBE timeout???<BR>1793341.591: HCF: !!!DM ERROR: tone dialing, TDBE timeout???<BR>1793405.845: HCF: !!!DM ERROR: tone dialing, TDBE timeout???<BR>1793519.696: HCF: !!!DM ERROR: tone dialing, TDBE timeout???<BR></DIV><p><hr SIZE=1>
Do you Yahoo!?<br>
<a href="http://shopping.yahoo.com/?__yltc=s%3A150000443%2Cd%3A22708228%2Cslk%3Atext%2Csec%3Amail">The New Yahoo! Shopping</a> - with improved product search