<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.2900.2802" name=GENERATOR></HEAD>
<BODY>
<DIV dir=ltr align=left><FONT face=Arial color=#0000ff size=2><SPAN
class=468401314-19122005>Hi,</SPAN></FONT></DIV>
<DIV dir=ltr align=left><FONT face=Arial color=#0000ff size=2><SPAN
class=468401314-19122005></SPAN></FONT> </DIV>
<DIV dir=ltr align=left><FONT face=Arial color=#0000ff size=2><SPAN
class=468401314-19122005>The problem is that it is a bussiness enviroment so i
can not change the fax settings.</SPAN></FONT></DIV><FONT face=Arial
color=#0000ff size=2></FONT><BR>
<DIV class=OutlookMessageHeader lang=nl dir=ltr align=left>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>Van:</B> Olivier Elfferich
[mailto:olivier@prohostings.com] <BR><B>Verzonden:</B> zaterdag 17 december 2005
18:13<BR><B>Aan:</B> 'hcflinux@lists.linuxant.com'<BR><B>Onderwerp:</B> FW:
HCFPCI modem hangs after Failed to properly detect high-speed data
carrier<BR></FONT><BR></DIV>
<DIV></DIV>
<DIV dir=ltr align=left><FONT face=Arial size=2><SPAN
class=796413002-17122005>Our modem:</SPAN></FONT></DIV>
<DIV>
<DIV><SPAN class=796413002-17122005><FONT face=Arial><FONT size=2>01:05.0 Serial
controller: Rockwell International HCF 56k Data/Fax Modem (rev 01)<SPAN
class=593570917-17122005><FONT
color=#0000ff> </FONT></SPAN></FONT></FONT></SPAN></DIV>
<DIV><SPAN class=796413002-17122005><FONT face=Arial><FONT color=#0000ff
size=2><SPAN class=593570917-17122005></SPAN></FONT></FONT></SPAN> </DIV>
<DIV><SPAN class=796413002-17122005><FONT face=Arial><FONT color=#0000ff
size=2><SPAN class=593570917-17122005>Os Fedora core
4</SPAN></FONT></FONT></SPAN></DIV>
<DIV><SPAN class=796413002-17122005><FONT face=Arial><FONT size=2><SPAN
class=593570917-17122005></SPAN></FONT></FONT></SPAN> </DIV>
<DIV><SPAN class=796413002-17122005><FONT face=Arial><FONT size=2><SPAN
class=593570917-17122005><FONT color=#0000ff>Modem
config</FONT></SPAN></FONT></FONT></SPAN></DIV>
<DIV><SPAN class=796413002-17122005><FONT face=Arial><FONT size=2><SPAN
class=593570917-17122005></SPAN></FONT></FONT></SPAN> </DIV>
<DIV><SPAN class=796413002-17122005><FONT face=Arial><FONT size=2><SPAN
class=593570917-17122005><FONT
color=#0000ff>CountryCode:
32<BR>AreaCode:
03<BR>FAXNumber:
03.633.02.34<BR>#LongDistancePrefix:
0<BR>#InternationalPrefix:
0<BR>DialStringRules:
etc/dialrules<BR>ServerTracing:
1<BR>SessionTracing:
11<BR>RecvFileMode:
0644<BR>LogFileMode:
0644<BR>DeviceMode:
0666<BR>RingsBeforeAnswer:
2<BR>SpeakerVolume:
off<BR>GettyArgs:
"-h %l dx_%s"<BR>LocalIdentifier:
NothingSetup<BR>TagLineFont:
etc/lutRS18.pcf<BR>TagLineFormat: "From %%l|%c|Page %%P of
%%T"<BR>MaxRecvPages: 25<BR>#<BR>#<BR># Modem-related stuff: should
reflect modem command interface<BR># and hardware connection/cabling (e.g. flow
control).<BR>#<BR>ModemType:
Class1 # use this to
supply a
hint<BR>ModemRate:
19200 # rate for
DCE-DTE communication<BR>ModemFlowControl:
rtscts #
default<BR>#<BR>ModemNoFlowCmd:
AT&K0 # setup no
flow control<BR>ModemHardFlowCmd:
AT&K3 # setup
hardware flow control<BR>ModemSoftFlowCmd:
AT&K4 # setup
software flow control<BR>ModemSetupDTRCmd:
AT&D2 # setup so
DTR drop resets modem<BR>ModemSetupDCDCmd:
AT&C1 # setup so
DCD reflects carrier (or
not)<BR>#<BR>ModemMfrQueryCmd:
!Rockwell<BR>ModemModelQueryCmd:
!RC288DPi<BR>ModemRevQueryCmd:
ATI3 # product
information<BR>#<BR>ModemResetCmds: AT&FX1<BR>ModemDialCmd:
ATDT%s<BR></FONT></SPAN></FONT></FONT></SPAN></DIV>
<DIV><FONT face=Arial color=#0000ff size=2><SPAN
class=796413002-17122005></SPAN></FONT> </DIV>
<DIV><SPAN class=796413002-17122005><FONT face=Arial size=2>Whe have trouble
with recieving faxes.</FONT></SPAN></DIV>
<DIV><SPAN class=796413002-17122005><FONT face=Arial color=#0000ff
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=796413002-17122005><FONT face=Arial size=2>Dec 16 12:58:56.37:
[21588]: SESSION BEGIN 000000168 036330234<BR>Dec 16 12:58:56.37: [21588]:
HylaFAX (tm) Version 4.2.3rc1<BR>Dec 16 12:58:56.37: [21588]: <--
[4:ATA\r]<BR>Dec 16 12:59:02.77: [21588]: --> [7:CONNECT]<BR>Dec 16
12:59:02.77: [21588]: ANSWER: FAX CONNECTION DEVICE '/dev/ttySHCF0'<BR>Dec
16 12:59:02.77: [21588]: RECV FAX: begin<BR>Dec 16 12:59:02.77: [21588]: <--
data [35]<BR>Dec 16 12:59:02.77: [21588]: <-- data [2]<BR>Dec 16 12:59:04.72:
[21588]: --> [7:CONNECT]<BR>Dec 16 12:59:04.72: [21588]: <-- data
[23]<BR>Dec 16 12:59:04.72: [21588]: <-- data [2]<BR>Dec 16 12:59:05.46:
[21588]: --> [7:CONNECT]<BR>Dec 16 12:59:05.46: [21588]: <-- data
[13]<BR>Dec 16 12:59:05.46: [21588]: <-- data [2]<BR>Dec 16 12:59:06.20:
[21588]: --> [2:OK]<BR>Dec 16 12:59:06.20: [21588]: <--
[9:AT+FRH=3\r]<BR>Dec 16 12:59:06.54: [21588]: --> [7:CONNECT]<BR>Dec 16
12:59:08.08: [21588]: --> [2:OK]<BR>Dec 16 12:59:08.08: [21588]: REMOTE TSI
"+0450038576"<BR>Dec 16 12:59:08.08: [21588]: <-- [9:AT+FRH=3\r]<BR>Dec 16
12:59:08.11: [21588]: --> [7:CONNECT]<BR>Dec 16 12:59:08.35: [21588]: -->
[2:OK]<BR>Dec 16 12:59:08.35: [21588]: REMOTE wants 14400 bit/s<BR>Dec 16
12:59:08.35: [21588]: REMOTE wants A4 page width (215 mm)<BR>Dec 16 12:59:08.35:
[21588]: REMOTE wants unlimited page length<BR>Dec 16 12:59:08.35: [21588]:
REMOTE wants 3.85 line/mm<BR>Dec 16 12:59:08.35: [21588]: REMOTE wants 2-D
MMR<BR>Dec 16 12:59:08.35: [21588]: REMOTE wants T.30 Annex A, 256-byte
ECM<BR>Dec 16 12:59:08.35: [21588]: RECV training at v.17 14400 bit/s<BR>Dec 16
12:59:08.35: [21588]: <-- [11:AT+FRM=145\r]<BR>Dec 16 12:59:10.07: [21588]:
--> [7:CONNECT]<BR>Dec 16 12:59:11.59: [21588]: RECV: TCF 2645 bytes, 1%
non-zero, 2604 zero-run<BR>Dec 16 12:59:11.61: [21588]: --> [10:NO
CARRIER]<BR>Dec 16 12:59:11.61: [21588]: <-- [9:AT+FRS=7\r]<BR>Dec 16
12:59:11.75: [21588]: --> [2:OK]<BR>Dec 16 12:59:11.75: [21588]: TRAINING
succeeded<BR>Dec 16 12:59:11.75: [21588]: <-- [9:AT+FTH=3\r]<BR>Dec 16
12:59:12.09: [21588]: --> [7:CONNECT]<BR>Dec 16 12:59:12.09: [21588]: <--
data [3]<BR>Dec 16 12:59:12.09: [21588]: <-- data [2]<BR>Dec 16 12:59:13.40:
[21588]: --> [2:OK]<BR>Dec 16 12:59:13.40: [21588]: <--
[11:AT+FRM=146\r]<BR>Dec 16 12:59:20.41: [21588]: <-- data [1]<BR>Dec 16
12:59:20.61: [21588]: MODEM <Timeout><BR>Dec 16 12:59:20.61: [21588]:
<-- [9:AT+FRH=3\r]<BR>Dec 16 12:59:20.80: [21588]: --> [7:CONNECT]<BR>Dec
16 12:59:22.78: [21588]: --> [5:ERROR]<BR>Dec 16 12:59:22.78: [21588]: MODEM
Command error<BR>Dec 16 12:59:22.78: [21588]: FCS error<BR>Dec 16 12:59:22.78:
[21588]: <-- [9:AT+FRS=7\r]<BR>Dec 16 12:59:27.46: [21588]: -->
[2:OK]<BR>Dec 16 12:59:27.46: [21588]: <-- [9:AT+FTH=3\r]<BR>Dec 16
12:59:27.80: [21588]: --> [7:CONNECT]<BR>Dec 16 12:59:27.80: [21588]: <--
data [3]<BR>Dec 16 12:59:27.80: [21588]: <-- data [2]<BR>Dec 16 12:59:29.11:
[21588]: --> [2:OK]<BR>Dec 16 12:59:29.11: [21588]: RECV send CRP (command
repeat)<BR>Dec 16 12:59:29.11: [21588]: <-- [9:AT+FRH=3\r]<BR>Dec 16
12:59:29.40: [21588]: --> [7:CONNECT]<BR>Dec 16 12:59:30.52: [21588]: -->
[2:OK]<BR>Dec 16 12:59:30.52: [21588]: RECV recv PPS (partial page
signal)<BR>Dec 16 12:59:30.52: [21588]: RECV recv EOP (no more pages or
documents)<BR>Dec 16 12:59:30.52: [21588]: RECV received 17 frames of block 1 of
page 1<BR>Dec 16 12:59:30.52: [21588]: <-- [9:AT+FRS=7\r]<BR>Dec 16
12:59:30.67: [21588]: --> [2:OK]<BR>Dec 16 12:59:30.67: [21588]: <--
[9:AT+FTH=3\r]<BR>Dec 16 12:59:31.01: [21588]: --> [7:CONNECT]<BR>Dec 16
12:59:31.01: [21588]: <-- data [35]<BR>Dec 16 12:59:31.01: [21588]: <--
data [2]<BR>Dec 16 12:59:33.34: [21588]: --> [2:OK]<BR>Dec 16 12:59:33.34:
[21588]: RECV send PPR (partial page request)<BR>Dec 16 12:59:33.34: [21588]:
<-- [11:AT+FRM=146\r]<BR>Dec 16 12:59:40.34: [21588]: <-- data [1]<BR>Dec
16 12:59:40.55: [21588]: MODEM <Timeout><BR>Dec 16 12:59:40.55: [21588]:
<-- [9:AT+FRH=3\r]<BR>Dec 16 12:59:40.77: [21588]: --> [7:CONNECT]<BR>Dec
16 12:59:43.63: [21588]: --> [5:ERROR]<BR>Dec 16 12:59:43.63: [21588]: MODEM
Command error<BR>Dec 16 12:59:43.63: [21588]: FCS error<BR>Dec 16 12:59:43.63:
[21588]: <-- [9:AT+FRS=7\r]<BR>Dec 16 13:00:13.64: [21588]: MODEM
<Timeout><BR>Dec 16 13:00:13.64: [21588]: <-- data [1]<BR>Dec 16
13:00:13.84: [21588]: MODEM <Timeout><BR>Dec 16 13:00:13.84: [21588]:
Failed to properly detect high-speed data carrier.<BR>Dec 16 13:00:13.84:
[21588]: RECV FAX (000000168): recvq/fax000000066.tif from +0450038576, route to
<unspecified>, 0 pages in 1:11<BR>Dec 16 13:00:13.84: [21588]: RECV FAX:
Failed to properly detect high-speed data carrier.<BR>Dec 16 13:00:13.84:
[21588]: <-- [9:AT+FTH=3\r]<BR>Dec 16 13:00:21.40: [21588]: -->
[0:]<BR>Dec 16 13:00:21.40: [21588]: RECV FAX (000000168): session with
+0450038576 terminated abnormally: Failed to properly detect high-speed data
carrier.<BR>Dec 16 13:00:21.40: [21588]: RECV FAX: bin/faxrcvd
"recvq/fax000000066.tif" "ttySHCF0" "000000168" "Failed to properly detect
high-speed data carrier."<BR>Dec 16 13:00:21.40: [21588]: RECV FAX: end<BR>Dec
16 13:00:21.40: [21588]: SESSION END</FONT></SPAN></DIV>
<DIV><SPAN class=796413002-17122005><FONT face=Arial
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=796413002-17122005><FONT face=Arial size=2>Afther that hylafax
sends a report:</FONT></SPAN></DIV>
<DIV><SPAN class=796413002-17122005><FONT face=Arial
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=796413002-17122005><FONT face=Arial size=2>The HylaFAX software
thinks that there is a problem with the modem<BR>on device /dev/ttySHCF0 that
needs attention; repeated attempts to<BR>initialize the modem have
failed.</FONT></SPAN></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><SPAN class=796413002-17122005><FONT face=Arial size=2>Consult the server
trace logs for more information on what is happening.</FONT></SPAN></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><SPAN class=796413002-17122005><FONT face=Arial size=2>You will be notified
again after 5 minutes if the problem persists.</FONT></SPAN></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><SPAN class=796413002-17122005><FONT face=Arial size=2>After that whe need
to do a rchcfpci stop/start, and restart hylafax to get it working
agian.</FONT></SPAN></DIV>
<DIV><SPAN class=796413002-17122005><FONT face=Arial
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=796413002-17122005><FONT face=Arial
size=2></FONT></SPAN> </DIV></DIV></BODY></HTML>