[hsflinux] driver 8086 2486
Sören Vogel
soeren.vogel at phil.tu-chemnitz.de
Sat Apr 6 10:41:20 EST 2002
Hi hsflinux-devs and users,
downloaded the new driver, RedHatRPM and Tarred Archive. Installed everything
as described in several ReadMes -- tried both, the rpm and archive. No error
was reported by the appropriate routines. But the modem still doesn't want to
dial :-(.
The listmodemapp for linux does not report a Conexant Modem but an Intel ones.
The DOS-App says:
=====================================================================
= SYSTEM INFORMATION =
=====================================================================
Date : 4/6/2002
ListMdm Ver : 1.6
Windows OS : Microsoft Windows XP
Build Number : 2600
=====================================================================
= RESULT OF MODEM QUERY =
=====================================================================
NUMBER OF MODEMS FOUND = 1
MODEM #1:
PCI CONFIGURATION INFORMATION READ:
VENDOR ID : 8086
DEVICE ID : 2486
SUBVENDOR ID : 104D
SUBDEVICE ID : 80E7
REVISION ID : 01
DEDUCED INFORMATION:
VENDOR NAME : ICH
DEVICE NAME : ICH3
SUBVENDOR NAME : SONY -- HTTP://WWW.SONY.COM
MODEM TYPE : HSF
WINXP INBUILD SUPPORT : NO
Minicom cannot initialize the modem (access via /dev/modem). The
RedHatInternetDialer tries for hours to access the device, and after insmoded
hsfserial, hangs up immediately. Kppp says the modem was busy -- all qeury
commands fail in that message. Wvdial says:
[root][hsflinmodem-4.06.06.02mbsibeta02040500]# wvdial
--> WvDial: Internet dialer version 1.41
--> Cannot open /dev/modem: Input/output error
Following I've insertet some informational stuff concerning my system Setup. I
run LinuxRedHat7.2 (2.4.7) on a Sony VAIO PCG-GR315MP, i686. Hopefully you can
help me,
Yours Soeren from Germany.
soeren.vogel at phil.tu-chemnitz.de
--- Informational Stuff ---
/proc/interrupts:
-----------------
CPU0
0: 124183 XT-PIC timer
1: 2315 XT-PIC keyboard
2: 0 XT-PIC cascade
3: 0 XT-PIC Ricoh Co Ltd RL5c476 II
8: 1 XT-PIC rtc
9: 0 XT-PIC usb-uhci, usb-uhci, Intel ICH3
12: 9489 XT-PIC PS/2 Mouse
14: 19814 XT-PIC ide0
15: 4 XT-PIC ide1
NMI: 0
ERR: 0
/proc/pci:
----------
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: PCI device 8086:3575 (Intel Corporation) (rev 2).
Prefetchable 32 bit memory at 0xe0000000 [0xefffffff].
Bus 0, device 1, function 0:
PCI bridge: PCI device 8086:3576 (Intel Corporation) (rev 2).
Master Capable. Latency=96. Min Gnt=12.
Bus 0, device 29, function 0:
USB Controller: PCI device 8086:2482 (Intel Corporation) (rev 1).
IRQ 9.
I/O at 0x1800 [0x181f].
Bus 0, device 29, function 1:
USB Controller: PCI device 8086:2484 (Intel Corporation) (rev 1).
IRQ 9.
I/O at 0x1820 [0x183f].
Bus 0, device 29, function 2:
USB Controller: PCI device 8086:2487 (Intel Corporation) (rev 1).
I/O at 0x1840 [0x185f].
Bus 0, device 30, function 0:
PCI bridge: Intel Corporation 82801BA PCI (rev 65).
Master Capable. No bursts. Min Gnt=4.
Bus 0, device 31, function 0:
ISA bridge: PCI device 8086:248c (Intel Corporation) (rev 1).
Bus 0, device 31, function 1:
IDE interface: PCI device 8086:248a (Intel Corporation) (rev 1).
I/O at 0x1f0 [0x1f7].
I/O at 0x3f6 [0x3f6].
I/O at 0x170 [0x177].
I/O at 0x376 [0x376].
I/O at 0x1860 [0x186f].
Non-prefetchable 32 bit memory at 0xd0000000 [0xd00003ff].
Bus 0, device 31, function 3:
SMBus: PCI device 8086:2483 (Intel Corporation) (rev 1).
I/O at 0x1880 [0x189f].
Bus 0, device 31, function 5:
Multimedia audio controller: PCI device 8086:2485 (Intel Corporation) (rev
1).
IRQ 9.
I/O at 0x1c00 [0x1cff].
I/O at 0x18c0 [0x18ff].
Bus 0, device 31, function 6:
Modem: PCI device 8086:2486 (Intel Corporation) (rev 1).
I/O at 0x2400 [0x24ff].
I/O at 0x2000 [0x207f].
Bus 1, device 0, function 0:
VGA compatible controller: PCI device 1002:4c59 (ATI Technologies Inc) (rev
0).
IRQ 9.
Master Capable. Latency=66. Min Gnt=8.
Prefetchable 32 bit memory at 0xd8000000 [0xdfffffff].
I/O at 0x3000 [0x30ff].
Non-prefetchable 32 bit memory at 0xd0100000 [0xd010ffff].
Bus 2, device 2, function 0:
FireWire (IEEE 1394): PCI device 104c:8021 (Texas Instruments) (rev 2).
Master Capable. Latency=64. Min Gnt=3.Max Lat=4.
Non-prefetchable 32 bit memory at 0xd0205000 [0xd02057ff].
Non-prefetchable 32 bit memory at 0xd0200000 [0xd0203fff].
Bus 2, device 5, function 0:
CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 128).
IRQ 3.
Master Capable. Latency=168. Min Gnt=128.Max Lat=5.
Non-prefetchable 32 bit memory at 0xd0206000 [0xd0206fff].
Bus 2, device 5, function 1:
CardBus bridge: Ricoh Co Ltd RL5c476 II (#2) (rev 128).
Master Capable. Latency=168. Max Lat=5.
Non-prefetchable 32 bit memory at 0xd0207000 [0xd0207fff].
Bus 2, device 8, function 0:
Ethernet controller: PCI device 8086:1031 (Intel Corporation) (rev 65).
IRQ 9.
Master Capable. Latency=66. Min Gnt=8.Max Lat=56.
Non-prefetchable 32 bit memory at 0xd0204000 [0xd0204fff].
I/O at 0x4000 [0x403f].
/etc/modules.conf:
------------------
alias parport_lowlevel parport_pc
alias eth0 e100
alias usb-controller usb-uhci
alias sound-slot-0 i810_audio
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null
2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1
|| :
alias /dev/ttyHSF* hsfserial
alias char-major-240 hsfserial
alias /dev/ttyCUA* hsfserial
alias char-major-241 hsfserial
alias /dev/modem hsfserial
options hsfserial serialmajor=240 calloutmajor=241
dmesg:
------
Linux version 2.4.7-10 (bhcompile at stripples.devel.redhat.com) (gcc version 2.96
20000731 (Red Hat Linux 7.1 2.96-98)) #1 Thu Sep 6 17:27:27 EDT 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
BIOS-e820: 000000000fef0000 - 000000000feff000 (ACPI data)
BIOS-e820: 000000000feff000 - 000000000ff00000 (ACPI NVS)
BIOS-e820: 000000000ff00000 - 000000000ff80000 (usable)
BIOS-e820: 000000000ff80000 - 0000000010000000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
Scanning bios EBDA for MXT signature
On node 0 totalpages: 65408
zone(0): 4096 pages.
zone(1): 61312 pages.
zone(2): 0 pages.
Kernel command line: ro root=/dev/hda7 hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1193.118 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2378.95 BogoMIPS
Memory: 252556k/261632k available (1269k kernel code, 6696k reserved, 90k data,
220k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) III Mobile CPU 1200MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
Sony Vaio laptop detected.
mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd9aa, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/248c] at 00:1f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Simple Boot Flag extension found and enabled.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
mxt_scan_bios: enter
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
PCI: Enabling device 00:1f.6 (0000 -> 0001)
PCI: No IRQ known for interrupt pin B of device 00:1f.6. Please try using
pci=biosirq.
Real Time Clock Driver v1.10d
block: queued sectors max/low 167661kB/55887kB, 512 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=248a
PCI: Enabling device 00:1f.1 (0005 -> 0007)
PCI: No IRQ known for interrupt pin A of device 00:1f.1. Please try using
pci=biosirq.
PCI_IDE: chipset revision 1
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
hda: IC25N030ATDA04-0, ATA DISK drive
hdc: HL-DT-ST CD-RW/DVD DRIVE GCC-4080N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 58605120 sectors (30006 MB) w/1806KiB Cache, CHS=3648/255/63
ide-floppy driver 0.97
Partition check:
hda: hda1 hda4 < hda5 hda6 hda7 hda8 >
floppy0: no floppy controllers found
ide-floppy driver 0.97
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 322k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 220k freed
Adding Swap: 1052216k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.259 $ time 17:36:49 Sep 6 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 9 for device 00:1d.0
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 9 for device 00:1d.1
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: No IRQ known for interrupt pin C of device 00:1d.2. Please try using
pci=biosirq.
usb-uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
usb-uhci.c: v1.251:USB Universal Host Controller Interface driver
EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide0(3,7), internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SCSI subsystem driver Revision: 1.00
Disallowing DMA for hdc
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: HL-DT-ST Model: RW/DVD GCC-4080N Rev: 0010
Type: CD-ROM ANSI SCSI revision: 02
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 15
0x378: readIntrThreshold is 15
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x10 cfgB=0x40
0x378: ECP settings irq=<none or set by other means> dma=<none or set by other
means>
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(98)
parport0: assign_addrs: aa5500ff(98)
parport0: Printer, Canon BJC-250
ip_conntrack (2044 buckets, 16352 max)
NET4: Linux IPX 0.47 for NET4.0
IPX Portions Copyright (c) 1995 Caldera, Inc.
IPX Portions Copyright (c) 2000, 2001 Conectiva, Inc.
NET4: AppleTalk 0.18a for Linux NET4.0
Intel(R) PRO/100 Fast Ethernet Adapter - Loadable driver, ver 1.8.38
Copyright (c) 2002 Intel Corporation
PCI: Found IRQ 9 for device 02:08.0
eth0: Intel(R) PRO/100 VE Network Connection
Mem:0xd0204000 IRQ:9 Speed:0 Mbps Dx:N/A
Failed to detect cable link.
Speed and duplex will be determined at time of connection.
Hardware receive checksums enabled
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 3 for device 02:05.0
PCI: No IRQ known for interrupt pin B of device 02:05.1. Please try using
pci=biosirq.
Yenta IRQ list 0cb0, PCI irq3
Socket status: 30000006
Yenta IRQ list 0cb0, PCI irq0
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 15
0x378: readIntrThreshold is 15
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x10 cfgB=0x40
0x378: ECP settings irq=<none or set by other means> dma=<none or set by other
means>
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(98)
parport0: assign_addrs: aa5500ff(98)
parport0: Printer, Canon BJC-250
lp0: using parport0 (polling).
lp0: console ready
/dev/vmmon: Module vmmon: registered with major=10 minor=165 tag=$Name: build-
1142 $
/dev/vmmon: Module vmmon: initialized
/dev/vmnet: open called by PID 1251 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
/dev/vmnet: open called by PID 1262 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 1301 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Unsupported Intel chipset (device id: 3575), you might want to try
agp_try_unsupported=1.
agpgart: no supported devices found.
[drm] Initialized radeon 1.1.1 20010405 on minor 0
Intel 810 + AC97 Audio, version 0.05, 17:36:29 Sep 6 2001
PCI: Enabling device 00:1f.5 (0000 -> 0001)
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH3 found at IO 0x18c0 and 0x1c00, IRQ 9
ac97_codec: AC97 Audio codec, id: 0x4144:0x5348 (Analog Devices AD1881A)
i810_audio: drain_dac, dma timeout?
i810_audio: drain_dac, dma timeout?
PCI: No IRQ known for interrupt pin B of device 00:1f.6. Please try using
pci=biosirq.
PCI: Setting latency timer of device 00:1f.6 to 64
LinuxHookInterrupt: request for IRQ 0 failed
Trying to free free IRQ0
hsf_request_port: ComCtrlOpen failed, r=1!
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.1
PCI: No IRQ known for interrupt pin B of device 00:1f.6. Please try using
pci=biosirq.
PCI: Setting latency timer of device 00:1f.6 to 64
LinuxHookInterrupt: request for IRQ 0 failed
Trying to free free IRQ0
hsf_request_port: ComCtrlOpen failed, r=1!
PCI: No IRQ known for interrupt pin B of device 00:1f.6. Please try using
pci=biosirq.
PCI: Setting latency timer of device 00:1f.6 to 64
LinuxHookInterrupt: request for IRQ 0 failed
Trying to free free IRQ0
hsf_request_port: ComCtrlOpen failed, r=1!
More information about the hsflinux
mailing list