[hsflinux] OsDebugBreakpoint...

[Michael Landon - IBN]

Using the newest hsf drivers (5.03.03.L3mbsibeta02072100k2.4.18_3) on RH 7.3,
I'm running into a weird error message.  For a while, the modem is responding
just fine...then all of a sudden I get a message saying "OsDebugBreakpoint" and
after that, the modem stops dialing:

Jul 26 11:30:53 Dialup2 WvDial: WvDial: Internet dialer version 1.41
Jul 26 11:30:53 Dialup2 WvDial: Initializing modem.
Jul 26 11:30:53 Dialup2 WvDial: Sending: ATZ
Jul 26 11:30:53 Dialup2 WvDial: ATZ
Jul 26 11:30:53 Dialup2 WvDial: OK
Jul 26 11:30:53 Dialup2 WvDial: ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0
Jul 26 11:30:53 Dialup2 WvDial: OK
Jul 26 11:30:53 Dialup2 WvDial: Sending: ATW2
Jul 26 11:30:53 Dialup2 WvDial: ATW2
Jul 26 11:30:53 Dialup2 WvDial: OK
Jul 26 11:30:53 Dialup2 WvDial: Modem initialized.
Jul 26 11:30:53 Dialup2 WvDial: Sending: ATDT 555-1212
Jul 26 11:30:53 Dialup2 WvDial: Waiting for carrier.
Jul 26 11:30:54 Dialup2 WvDial: ATDT 555-1212
Jul 26 11:30:56 Dialup2 WvDial: NO DIALTONE
Jul 26 11:30:56 Dialup2 WvDial: No dial tone.  Trying again in 5 seconds.
Jul 26 11:31:00 Dialup2 WvDial: Sending: ATDT 555-1212
Jul 26 11:31:00 Dialup2 WvDial: Waiting for carrier.
Jul 26 11:31:01 Dialup2 WvDial: ATDT 555-1212
Jul 26 11:31:03 Dialup2 kernel: cnxthsf_OsDebugBreakpoint: paused
Jul 26 11:31:03 Dialup2 kernel: cnxthsf_OsDebugBreakpoint: paused
Jul 26 11:31:54 Dialup2 WvDial: NO CARRIER
Jul 26 11:31:54 Dialup2 WvDial: No Carrier!  Trying again.
Jul 26 11:31:57 Dialup2 WvDial: Sending: ATDT 555-1212
Jul 26 11:31:57 Dialup2 WvDial: Waiting for carrier.
Jul 26 11:31:57 Dialup2 WvDial: ATDT 555-1212
Jul 26 11:32:50 Dialup2 WvDial: NO CARRIER
Jul 26 11:32:50 Dialup2 WvDial: No Carrier!  Trying again.
Jul 26 11:32:54 Dialup2 WvDial: Sending: ATDT 555-1212
Jul 26 11:32:54 Dialup2 WvDial: Waiting for carrier.
Jul 26 11:32:54 Dialup2 WvDial: ATDT 555-1212
Jul 26 11:32:54 Dialup2 WvDial: ERROR
Jul 26 11:32:54 Dialup2 WvDial: Invalid dial command.
Jul 26 11:32:54 Dialup2 WvDial: Disconnecting at Fri Jul 26 11:32:54 2002


After this point, the modem appears unable to dial and I keep getting this
message:

Jul 26 12:00:57 Dialup2 pppd[6626]: pppd 2.4.1 started by root, uid 0
Jul 26 12:00:58 Dialup2 WvDial: WvDial: Internet dialer version 1.41
Jul 26 12:00:58 Dialup2 WvDial: Initializing modem.
Jul 26 12:00:58 Dialup2 WvDial: Sending: ATZ
Jul 26 12:00:59 Dialup2 WvDial: ATZ
Jul 26 12:00:59 Dialup2 WvDial: OK
Jul 26 12:00:59 Dialup2 WvDial: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 S11=55
+FCLASS=0
Jul 26 12:00:59 Dialup2 WvDial: ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0
Jul 26 12:00:59 Dialup2 WvDial: OK
Jul 26 12:00:59 Dialup2 WvDial: Sending: ATW2
Jul 26 12:00:59 Dialup2 WvDial: ATW2
Jul 26 12:00:59 Dialup2 WvDial: OK
Jul 26 12:00:59 Dialup2 WvDial: Modem initialized.
Jul 26 12:00:59 Dialup2 WvDial: Sending: ATDT 555-1212
Jul 26 12:00:59 Dialup2 WvDial: Waiting for carrier.
Jul 26 12:00:59 Dialup2 WvDial: ATDT 555-1212
Jul 26 12:00:59 Dialup2 WvDial: ERROR
Jul 26 12:00:59 Dialup2 WvDial: Invalid dial command.
Jul 26 12:00:59 Dialup2 WvDial: Disconnecting at Fri Jul 26 12:00:59 2002


Any ideas what might cause this?
Michael