[hsflinux] hsfconfig creating a file that does not exist..

Börkur bugsy at isl.is
Tue Aug 27 22:40:15 EDT 2002 

yes indeed i atached the log file...
Beware that most of the log file is my startup info ...

Best Regards, Berkz


Marc Boucher wrote:

>are there any kernel error messages ? (run "dmesg" command to see them)
>
>Marc
>
>On Tue, Aug 27, 2002 at 08:26:28PM +0000, Börkur wrote:
>  
>
>>Hi I'm using gentoo linux with kernel 2.4.19.
>>
>>when i run hsfconfig it find's the modem and all seams to run fine until 
>>it says that the modem is probably working on /dev/ttySHSF0
>>
>>but that file does not exist?
>>
>>Can anybody help?
>>
>>_______________________________________________
>>hsflinux mailing list
>>hsflinux at lists.mbsi.ca
>>http://www.mbsi.ca/mailman/listinfo/hsflinux
>>
>>    
>>
>_______________________________________________
>hsflinux mailing list
>hsflinux at lists.mbsi.ca
>http://www.mbsi.ca/mailman/listinfo/hsflinux
>
>
>  
>


-------------- next part --------------
Linux version 2.4.19-gentoo-r5 (root at enterprise.pcnet.is) (gcc version 2.95.3 20010315 (release)) #3 Tue Aug 27 14:59:02 GMT 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000013ff0000 (usable)
 BIOS-e820: 0000000013ff0000 - 0000000013ff3000 (ACPI NVS)
 BIOS-e820: 0000000013ff3000 - 0000000014000000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
319MB LOWMEM available.
On node 0 totalpages: 81904
zone(0): 4096 pages.
zone(1): 77808 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda4
Initializing CPU#0
Detected 701.759 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1389.72 BogoMIPS
Memory: 320572k/327616k available (1550k kernel code, 6656k reserved, 478k data, 236k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU:             Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfb360, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12 (20020219) Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
NTFS driver v1.1.22 [Flags: R/W]
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 608 slots per queue, batch=152
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: SAMSUNG SV1022D, ATA DISK drive
hdb: CD-ROM 56X L, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 19931184 sectors (10205 MB) w/472KiB Cache, CHS=1240/255/63, UDMA(33)
hdb: ATAPI 56X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PPP generic driver version 2.4.2
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 262M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 32M @ 0xd0000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] AGP 0.99 on Intel 440BX @ 0xd0000000 32MB
[drm] Initialized radeon 1.1.1 20010405 on minor 1
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
es1371: version v0.30 time 15:02:21 Aug 27 2002
PCI: Found IRQ 5 for device 00:0b.0
es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02
es1371: found es1371 rev 2 at io 0xe800 irq 5
es1371: features: joystick 0x0
ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus]
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 10 for device 00:07.2
uhci.c: USB UHCI at I/O 0xe000, IRQ 10
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 236k freed
Adding Swap: 401616k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,4), internal journal
divide error: 0000
CPU:    0
EIP:    0010:[<d48469a0>]    Tainted: P 
EFLAGS: 00010246
eax: 00000064   ebx: d492af94   ecx: 00000064   edx: 00000000
esi: d492af7c   edi: 00000000   ebp: d329bdac   esp: d329bd94
ds: 0018   es: 0018   ss: 0018
Process modprobe (pid: 2201, stackpage=d329b000)
Stack: d492a1e4 00000000 d492a210 d492a1e4 d345cc40 d492a1e4 d329be0c d484eb5d 
       00000000 000003e8 d484f240 d484f130 d484f160 d492a1e4 d329be2c d484d811 
       d345c940 00000003 00000001 00000080 d484f240 d484f260 d484f280 000ff08c 
Call Trace: [<d484eb5d>] [<d484f240>] [<d484f130>] [<d484f160>] [<d484d811>] 
   [<d484f240>] [<d484f260>] [<d484f280>] [<d4927fc0>] [<d48608e8>] [<d4927f40>] 
   [<d4924b99>] [<d48707b2>] [<d4924600>] [<d4927f40>] [<d4924be5>] [<d4927f40>] 
   [<d4927f40>] [<d48606dd>] [<d49271c1>] [<d4927f40>] [<d4928040>] [<d4928080>] 
   [<d4927467>] [<d4927fc0>] [<d4928100>] [<d4924cdd>] [<d4927fc0>] [<d4924cc0>] 
   [<c012ea13>] [<c0115ead>] [<d4924060>] [<c010871b>] 

Code: f7 f7 c7 43 04 00 00 00 00 c7 46 18 00 00 00 00 c7 46 28 a8 
 <3>modprobe[2201] exited with preempt_count 1

More information about the hsflinux mailing list