[hsflinux] Frequent disconnects

[Shaji N Vyapron]

 Hi,

I get frequent disconnects using Linux driver whereas I do not get any
such problem with windows. Attaching the output of AT#UG command along with system info.

Thanks,
Shaji

Init Strings(My phone co. supports both pulse and tone dialing):

Oct 28 22:42:16 nandu WvDial: WvDial: Internet dialer version 1.41
Oct 28 22:42:16 nandu WvDial: Initializing modem.
Oct 28 22:42:16 nandu WvDial: Sending: ATZ
Oct 28 22:42:16 nandu WvDial: ATZ
Oct 28 22:42:16 nandu WvDial: OK
Oct 28 22:42:16 nandu WvDial: Sending: ATQ0 V1 E1 W1 S0=0 &C1 &D2 S11=55
+FCLASS=0
Oct 28 22:42:16 nandu WvDial: ATQ0 V1 E1 W1 S0=0 &C1 &D2 S11=55 +FCLASS=0
Oct 28 22:42:16 nandu WvDial: OK
Oct 28 22:42:16 nandu WvDial: Sending: ATM1L3
Oct 28 22:42:17 nandu WvDial: ATM1L3
Oct 28 22:42:17 nandu WvDial: OK
Oct 28 22:42:17 nandu WvDial: Modem initialized.
Oct 28 22:42:17 nandu WvDial: Sending: ATDT 172222


+ date
Sun Nov 3 19:46:20 IST 2002

+ hsfconfig --info
Linux HSF softmodem drivers, version 5.03.03.L3mbsibeta02101000

WARNING: this is an EXPERIMENTAL BETA VERSION of the HSF drivers for Linux.
USE AT YOUR OWN RISK! See the file /usr/lib/hsf/LICENSE for details.

Conexant Systems neither distributes nor maintains this package.
PLEASE DO NOT CONTACT CONEXANT REGARDING THIS SOFTWARE!!!
If you require assistance or need more information, go to:
http://www.mbsi.ca/cnxtlindrv

Current HSF configuration:

Country name: "INDIA", T.35 code: 0053
PCI Modem vendor-id: 8086, device-id: 2486
Driver inf filename: /etc/hsf/inf/linux_intel_smartmc.inf
linux-i686(i686)-2.4.7-10-MODVERS RedHat-7.2
+ uname -a
Linux nandu 2.4.7-10 #1 Thu Sep 6 17:27:27 EDT 2001 i686 unknown

+ cat /proc/version
Linux version 2.4.7-10 (bhcompile at stripples.devel.redhat.com) (gcc
version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)) #1 Thu Sep 6 17:27:27
EDT 2001

+ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 11
model name : Intel(R) Pentium(R) III Mobile CPU 1066MHz
stepping : 1
cpu MHz : 1063.138
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca
cmov pat pse36 mmx fxsr sse
bogomips : 2123.36


<#UG VERSION=1>
<UNIMODEM VERSION=10>
<CALL SETUP RESULT=Detected Data Answer Tone>
<MULTIMEDIA MODE=Data Only>
<DTE-DCE MODE=Async data>
<V.8 CM octet string="">
<V.8 JM octet string="">
<RX SIG POWER DB=0, TX SIG POWER DB=0, S/N RATIO DB=191>
<NORMALIZED MEAN SQUARED ERROR=0>
<NEAR ECHO LOSS=0>
<FAR ECHO LOSS=0>
<FAR ECHO DELAY=0>
<ROUND TRIP DELAY=0>
<V.34 INFO bit map =0>
<TX MOD=V.17, TX SYMBOL RATE=3200, TX CARRIER FREQ=0>
<RX MOD=V.17, RX SYMBOL RATE=3200, RX CARRIER FREQ=0>
<TX FIRST DATA RATE=24000, RX FIRST DATA RATE=31200>
<CARRIER LOSS=0, RATE RENEG=0>
<RETRAINS REQ=0, RETRAINS DET=0>
<TX FINAL RATE=0, RX FINAL RATE=0>
<PROTOCOL NEGOTIATION=LAPM>
<EC FRAME SIZE=80>
<EC LINK TIMEOUTS=0>
<EC LINK NAKS=0>
<COMPRESSION NEGOTIATION=V42BIS>
<COMPRESSION DICTIONARY SIZE=800>
<TX FLOW CONTROL=2>
<RX FLOW CONTROL=2>
<TX CHARS SENT FROM DTE=11D4C>
<RX CHARS SENT TO DTE=5186>
<TX CHARS LOST=0>
<RX CHARS LOST=0>
<TX FRAME COUNT=22A>
<RX FRAME COUNT=115>
<TX FRAME ERROR COUNT=49>
<RX FRAME ERROR COUNT=3>
<TERMINATION CAUSE=DTR drop>
<LSD Vdd=0, Power Bits=0>
<V8BIS FLEX VERSION=0, V8BIS DSP VERSION=0>
<RATE RENEG REQ=0, RATE RENEG DET=0>
<HIGH PASS FILTER ENABLED=E0>
<ROBBED BIT PATTERN=0>
<DIGITAL PAD DETECTED=0, DIGITAL LOSS ESTIMATE=79E0>
<Cnt1=0, Det1=E0, Res1=0>
<EQM=0, TRAINING EQM SUM=0>
<DIB ERROR COUNTERS=0, 0, 0, 0, 0, 0, 0, 0>
<RETRAIN/HDLC RESET=0>

OK