[hsflinux] NO DIALTONE on RH9.0

[Linuxant modem support]

Hi,

It might also be an IRQ assignment problem. Can you please send us the file
generated by the command "hsfconfig --dumpdiag"?

Thank you,

Jean-Simon Durand
Technical specialist / Linuxant
www.linuxant.com
modem.support at linuxant.com


----- Original Message -----
From: "Simon Crosato" <linuxmail2 at yahoo.com.au>
To: <hsflinux at lists.mbsi.ca>
Sent: Monday, June 16, 2003 8:55 AM
Subject: Re: [hsflinux] NO DIALTONE on RH9.0


Hi Jean-Simon

I have upgraded to the latest RH kernel 2.4.20-18
source, then re-built and installed the
hsflinmodem-5.03.27lnxbeta03042700-1.i386.src.rpm.
The modules load without problem and the devices and
symlinks are created.  I am using an inf file based on
/etc/hsf/inf/linux_hsfi.inf but with all sections
checked and modified as need be to match the Win9x inf
file.  hsfconfig gives no error.  Still NO DIALTONE
from wvdial.  Is this a RH9 thing?  I installed from a
src rpm under RH7.3 without modifying the inf file and
the modem worked well first time.  Any thoughts?

~Simon

--- Jean-Simon Durand <jsimon at linuxant.com> wrote: >
Hi,
>
> There was another user from Australia with an HCF
> modem who had the same
> problem. He managed to get it working by importing
> the RELAYS and FLAGS from
> the windows driver. You should probably give it
> another shot.
>
> Make sure you rerun "hsfconfig" after editing the
> proper INF file (the one
> that is actually used by the driver).
>
> Please let us know about your results.
>
> Jean-Simon
>
>
> ----- Original Message -----
> From: "Simon Crosato" <linuxmail2 at yahoo.com.au>
> To: <hsflinux at lists.mbsi.ca>
> Sent: Monday, June 09, 2003 9:53 AM
> Subject: [hsflinux] NO DIALTONE on RH9.0
>
>
> Hi List users
>
> I have read the FAQ and scanned the list, but cannot
> get the driver to recognise a dialtone.
> Interestingly, I had the modem working easily under
> RH7.3, but I'm now getting to the hair pulling stage
> (closely followed by having to use Windoze again
> which
> hurts more). I can hear the dialtone thru the PC
> speaker, but the driver can't seem to recognise it.
> Incidently, the modem works as expected under
> Windows
> Me.
>
> I have tried:
>
> (1) Straight rpm installs on a fresh RH 2.4.20-8
> kernel, and the same with a 2.4.20-9 kernel.
> No module load probs, but no dialtone either.
>
> (2) The same booting with apic=off. I don't think my
> machine uses them anyway. No tone detection.
>
> (3) Building from sources both src.rpm and tar.gz.
> No
> module load probs, but no dialtone either.
>
> (4) Importing values from the Win9.X inf file. Same
> deal.
>
> (5) Building from sources with a modified ostime.c I
> gleaned from the list archives. Clean compile but
> still no tone.
>
> I don't know what else to try short of installing
> the
> next RH9.0 kernel 2.4.20-18. I have attached
> hsfdiag.txt just in case. Looking forward to a
> response from a better head than mine. AdThanksVance
>
> ~Simon