[hsflinux] NO DIALTONE, Mandrake 9.1 distro ("me too", I know...)
Éric Bischoff
e.bischoff at noos.fr
Fri Jun 27 14:15:10 EDT 2003
Hi all,
First of all, I have browsed the mailing list archives, and I have read the
docs, so I suppose I am entitled to post here ;-).
I get the NO DIALTONE symptom on the brand new laptop that I bought yesterday
for a friend of mine.
The hardwere is as follows :
ACER Aspire 1310 XC laptop
Connexant winmodem
PCI chipset 1106:3068
The line and the cables are okay because I can connect with a plain old
external modem.
I am located in France. I did not forget to do "hsfconfig --country FRANCE".
I have installed the RPM drivers. They supposedly match the kernel version.
I have not tried yet to copy over the famous INF file settings from Windows.
Will do.
ACPI is not activated (boot with acpi=off). I tried to switch off APIC but
somehow the kernel always reenables it.
Any help is strongly welcome, of course. Diagnostic file is attached. As a
reward and personal contribution, if it succeeds, I will write a page on
linux-on-laptops.org about that laptop ;-).
--
Hum.
(Fred: "Philémon", tome 2)
-------------- next part --------------
+ modprobe -v hsfserial
/sbin/insmod /usr/lib/hsf/modules/binaries/i586/mdk/linux-2.4.21-0.13mdk/hsfosspec.o
Warning: loading /usr/lib/hsf/modules/binaries/i586/mdk/linux-2.4.21-0.13mdk/hsfosspec.o will taint the kernel: non-GPL license - Copyright (C) 1996-2001 Conexant Systems Inc. All Rights Reserved.
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module hsfosspec loaded, with warnings
/sbin/insmod /usr/lib/hsf/modules/binaries/i586/mdk/linux-2.4.21-0.13mdk/hsfengine.o
Warning: loading /usr/lib/hsf/modules/binaries/i586/mdk/linux-2.4.21-0.13mdk/hsfengine.o will taint the kernel: non-GPL license - Copyright (C) 1996-2001 Conexant Systems Inc. All Rights Reserved.
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module hsfengine loaded, with warnings
/sbin/insmod /usr/lib/hsf/modules/binaries/i586/mdk/linux-2.4.21-0.13mdk/hsfserial.o serialmajor=240 calloutmajor=241
+ lsmod
Module Size Used by Tainted: P
hsfvia 123184 2 (autoclean)
hsfserial 26836 0 (unused)
hsfengine 1126348 0 [hsfserial]
hsfosspec 35548 1 [hsfvia hsfserial hsfengine]
snd-seq-oss 31104 0 (unused)
snd-seq-midi-event 5640 0 [snd-seq-oss]
snd-seq 42608 2 [snd-seq-oss snd-seq-midi-event]
snd-pcm-oss 43556 1
snd-mixer-oss 14488 0 [snd-pcm-oss]
snd-via82xx 14092 5
snd-ac97-codec 40160 0 [snd-via82xx]
snd-pcm 77536 0 [snd-pcm-oss snd-via82xx]
snd-timer 18376 0 [snd-seq snd-pcm]
snd-mpu401-uart 4396 0 [snd-via82xx]
snd-rawmidi 17600 0 [snd-mpu401-uart]
snd-seq-device 5832 0 [snd-seq-oss snd-seq snd-rawmidi]
snd-page-alloc 7732 0 [snd-via82xx snd-pcm]
snd 40868 4 [snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-via82xx snd-ac97-codec snd-pcm snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device]
soundcore 6276 0 [snd]
nfsd 74256 0 (autoclean)
ds 8456 1
yenta_socket 13056 1
pcmcia_core 57184 0 [ds yenta_socket]
af_packet 14952 0 (autoclean)
sr_mod 16920 2 (autoclean)
floppy 55132 0
via-rhine 15056 1 (autoclean)
mii 3832 0 (autoclean) [via-rhine]
ohci1394 19048 0 (unused)
ieee1394 45900 0 [ohci1394]
nls_iso8859-15 4092 2 (autoclean)
nls_cp850 4316 2 (autoclean)
vfat 11820 2 (autoclean)
fat 37944 0 (autoclean) [vfat]
supermount 15296 2 (autoclean)
ide-cd 33856 0
cdrom 31648 0 [sr_mod ide-cd]
ide-scsi 11280 1
scsi_mod 103284 2 [sr_mod ide-scsi]
ehci-hcd 18568 0 (unused)
usb-uhci 24652 0 (unused)
usbcore 72992 1 [ehci-hcd usb-uhci]
rtc 8060 0 (autoclean)
+ date
sam jun 28 12:14:25 UTC 2003
+ /usr/sbin/hsfconfig --info
Linux HSF softmodem drivers, version 5.03.27lnxtbeta03042700
WARNING: this is an EXPERIMENTAL BETA VERSION of the HSF drivers for Linux.
USE AT YOUR OWN RISK! See the file /usr/lib/hsf/LICENSE for details.
Conexant Systems neither distributes nor maintains this package.
PLEASE DO NOT CONTACT CONEXANT REGARDING THIS SOFTWARE!!!
If you require assistance or need more information, go to:
http://www.linuxant.com/drivers
When reporting a problem for the first time, please send
us the file generated by "hsfconfig --dumpdiag".
Current HSF configuration:
Country name: "FRANCE", T.35 code: 003D
PCI Modem vendor-id: 1106, device-id: 3068
Driver inf filename: /etc/hsf/inf/linux_via_smartmc.inf
+ identify_system
linux-i686(i686)-2.4.21-0.13mdk-MODVERS Mandrake-9.1
+ uname -a
Linux localhost 2.4.21-0.13mdk #1 Fri Mar 14 15:08:06 EST 2003 i686 unknown unknown GNU/Linux
+ gcc -v
Reading specs from /usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.2.2/specs
Configured with: ../configure --prefix=/usr --libdir=/usr/lib --with-slibdir=/lib --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --disable-checking --enable-long-long --enable-__cxa_atexit --enable-languages=c,c++,ada,f77,objc,java --host=i586-mandrake-linux-gnu --with-system-zlib
Thread model: posix
gcc version 3.2.2 (Mandrake Linux 9.1 3.2.2-3mdk)
+ cat -v /proc/version
Linux version 2.4.21-0.13mdk (flepied at bi.mandrakesoft.com) (gcc version 3.2.2 (Mandrake Linux 9.1 3.2.2-3mdk)) #1 Fri Mar 14 15:08:06 EST 2003
+ cat -v /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Athlon(tm) XP 1800+
stepping : 1
cpu MHz : 1525.881
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 3040.87
+ cat -v /etc/mandrake-release
Mandrake Linux release 9.1 (Bamboo) for i586
+ cat -v /etc/redhat-release
Mandrake Linux release 9.1 (Bamboo) for i586
+ lspci -n
00:00.0 Class 0600: 1106:3156
00:01.0 Class 0604: 1106:b091
00:0a.0 Class 0607: 1217:6972
00:0c.0 Class 0c00: 104c:8026
00:10.0 Class 0c03: 1106:3038 (rev 80)
00:10.1 Class 0c03: 1106:3038 (rev 80)
00:10.3 Class 0c03: 1106:3104 (rev 82)
00:11.0 Class 0601: 1106:3177
00:11.1 Class 0101: 1106:0571 (rev 06)
00:11.5 Class 0401: 1106:3059 (rev 50)
00:11.6 Class 0780: 1106:3068 (rev 80)
00:12.0 Class 0200: 1106:3065 (rev 74)
01:00.0 Class 0300: 5333:8d04
+ lspci -v
00:00.0 Host bridge: VIA Technologies, Inc. P/KN266 Host Bridge
Subsystem: VIA Technologies, Inc. P/KN266 Host Bridge
Flags: bus master, 66Mhz, medium devsel, latency 8
Memory at b0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: e0000000-efffffff
Prefetchable memory behind bridge: a0000000-afffffff
Capabilities: [80] Power Management version 2
00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
Subsystem: Citicorp TTI: Unknown device 10e7
Flags: bus master, stepping, slow devsel, latency 168, IRQ 11
Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=02, sec-latency=176
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001
00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Citicorp TTI: Unknown device 1162
Flags: bus master, medium devsel, latency 128, IRQ 5
Memory at f0000000 (32-bit, non-prefetchable) [size=2K]
Memory at f0004000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. USB
Flags: bus master, medium devsel, latency 22, IRQ 11
I/O ports at 1200 [size=32]
Capabilities: [80] Power Management version 2
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. USB
Flags: bus master, medium devsel, latency 22
I/O ports at 1300 [size=32]
Capabilities: [80] Power Management version 2
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at f0008000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: VIA Technologies, Inc. VT8235 ISA Bridge
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT8235 Bus Master ATA133/100/66/33 IDE
Flags: bus master, medium devsel, latency 64
I/O ports at 1100 [size=16]
Capabilities: [c0] Power Management version 2
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 50)
Subsystem: Acer Incorporated [ALI]: Unknown device 0030
Flags: medium devsel, IRQ 5
I/O ports at e000 [size=256]
Capabilities: [c0] Power Management version 2
00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 Modem] (rev 80)
Subsystem: Acer Incorporated [ALI]: Unknown device 0030
Flags: medium devsel, IRQ 5
I/O ports at e100 [size=256]
Capabilities: [d0] Power Management version 2
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
Subsystem: Acer Incorporated [ALI]: Unknown device 0030
Flags: bus master, stepping, medium devsel, latency 128, IRQ 11
I/O ports at e200 [size=256]
Memory at f0008100 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
01:00.0 VGA compatible controller: S3 Inc. [ProSavageDDR K4M266] (prog-if 00 [VGA])
Subsystem: Acer Incorporated [ALI]: Unknown device 0030
Flags: bus master, 66Mhz, medium devsel, latency 128, IRQ 11
Memory at e0080000 (32-bit, non-prefetchable) [size=512K]
Memory at a8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at 000c0000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Capabilities: [80] AGP version 2.0
+ lspci -n -vvv
00:00.0 Class 0600: 1106:3156
Subsystem: 1106:3156
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at b0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=x4
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 Class 0604: 1106:b091
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: e0000000-efffffff
Prefetchable memory behind bridge: a0000000-afffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Class 0607: 1217:6972
Subsystem: 10cf:10e7
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=02, sec-latency=176
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:0c.0 Class 0c00: 104c:8026 (prog-if 10)
Subsystem: 10cf:1162
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (500ns min, 1000ns max), cache line size 04
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f0004000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
00:10.0 Class 0c03: 1106:3038 (rev 80)
Subsystem: 1106:3038
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 22
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 1200 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.1 Class 0c03: 1106:3038 (rev 80)
Subsystem: 1106:3038
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 22
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 1300 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.3 Class 0c03: 1106:3104 (rev 82) (prog-if 20)
Subsystem: 1106:3104
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 11
Region 0: Memory at f0008000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
00:11.0 Class 0601: 1106:3177
Subsystem: 1106:3177
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 Class 0101: 1106:0571 (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: 1106:0571
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at 1100 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.5 Class 0401: 1106:3059 (rev 50)
Subsystem: 1025:0030
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at e000 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.6 Class 0780: 1106:3068 (rev 80)
Subsystem: 1025:0030
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at e100 [size=256]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:12.0 Class 0200: 1106:3065 (rev 74)
Subsystem: 1025:0030
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (750ns min, 2000ns max), cache line size 04
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e200 [size=256]
Region 1: Memory at f0008100 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 Class 0300: 5333:8d04
Subsystem: 1025:0030
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (1000ns min, 63750ns max), cache line size 04
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0080000 (32-bit, non-prefetchable) [size=512K]
Region 1: Memory at a8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at 000c0000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=x4
+ cat -v /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: VIA Technologies, Inc. P/KN266 Host Bridge (rev 0).
Master Capable. Latency=8.
Prefetchable 32 bit memory at 0xb0000000 [0xb7ffffff].
Bus 0, device 1, function 0:
PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (rev 0).
Master Capable. No bursts. Min Gnt=8.
Bus 0, device 10, function 0:
CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller (rev 0).
IRQ 11.
Master Capable. Latency=168. Min Gnt=128.Max Lat=5.
Non-prefetchable 32 bit memory at 0x10000000 [0x10000fff].
Bus 0, device 12, function 0:
FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) (rev 0).
IRQ 5.
Master Capable. Latency=128. Min Gnt=2.Max Lat=4.
Non-prefetchable 32 bit memory at 0xf0000000 [0xf00007ff].
Non-prefetchable 32 bit memory at 0xf0004000 [0xf0007fff].
Bus 0, device 16, function 0:
USB Controller: VIA Technologies, Inc. USB (rev 128).
IRQ 11.
Master Capable. Latency=22.
I/O at 0x1200 [0x121f].
Bus 0, device 16, function 1:
USB Controller: VIA Technologies, Inc. USB (#2) (rev 128).
Master Capable. Latency=22.
I/O at 0x1300 [0x131f].
Bus 0, device 16, function 3:
USB Controller: VIA Technologies, Inc. USB 2.0 (rev 130).
IRQ 11.
Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xf0008000 [0xf00080ff].
Bus 0, device 17, function 0:
ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge (rev 0).
Bus 0, device 17, function 1:
IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 6).
Master Capable. Latency=64.
I/O at 0x1100 [0x110f].
Bus 0, device 17, function 5:
Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 80).
IRQ 5.
I/O at 0xe000 [0xe0ff].
Bus 0, device 17, function 6:
Communication controller: VIA Technologies, Inc. AC97 Modem Controller (rev 128).
IRQ 5.
I/O at 0xe100 [0xe1ff].
Bus 0, device 18, function 0:
Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 116).
IRQ 11.
Master Capable. Latency=128. Min Gnt=3.Max Lat=8.
I/O at 0xe200 [0xe2ff].
Non-prefetchable 32 bit memory at 0xf0008100 [0xf00081ff].
Bus 1, device 0, function 0:
VGA compatible controller: S3 Inc. VT8751 [ProSavageDDR P4M266] VGA Controller (rev 0).
IRQ 11.
Master Capable. Latency=128. Min Gnt=4.Max Lat=255.
Non-prefetchable 32 bit memory at 0xe0080000 [0xe00fffff].
Prefetchable 32 bit memory at 0xa8000000 [0xafffffff].
+ cat -v /proc/cmdline
root=/dev/hda5 quiet devfs=mount hdc=ide-scsi acpi=off vga=788
+ cat -v /proc/uptime
110.28 81.87
+ cat -v /proc/devices
Character devices:
1 mem
2 pty/m%d
3 pty/s%d
4 tts/%d
5 cua/%d
7 vcs
10 misc
14 sound
29 fb
116 alsa
128 ptm
136 pts/%d
162 raw
171 ieee1394
180 usb
254 pcmcia
Block devices:
1 ramdisk
2 fd
3 ide0
9 md
11 sr
22 ide1
+ cat -v /proc/misc
135 rtc
1 psaux
134 apm_bios
+ cat -v /proc/filesystems
nodev rootfs
nodev bdev
nodev proc
nodev sockfs
nodev tmpfs
nodev shm
nodev pipefs
ext2
nodev ramfs
nodev devfs
nodev nfs
nodev devpts
nodev usbdevfs
nodev usbfs
nodev supermount
vfat
+ cat -v /proc/interrupts
CPU0
0: 11029 XT-PIC timer
1: 137 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 2120 XT-PIC ohci1394, VIA8233
8: 1 XT-PIC rtc
11: 6 XT-PIC usb-uhci, ehci-hcd, eth0, O2 Micro, Inc. OZ6912 Cardbus Controller
12: 615 XT-PIC PS/2 Mouse
14: 6654 XT-PIC ide0
15: 238 XT-PIC ide1
NMI: 0
LOC: 10994
ERR: 2
MIS: 0
+ cat -v /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000e0000-000effff : Extension ROM
000f0000-000fffff : System ROM
00100000-0dfeffff : System RAM
00100000-00260a36 : Kernel code
00260a37-0037831f : Kernel data
0dff0000-0dffffbf : ACPI Tables
0dffffc0-0dffffff : ACPI Non-volatile Storage
10000000-10000fff : O2 Micro, Inc. OZ6912 Cardbus Controller
10400000-107fffff : PCI CardBus #02
10800000-10bfffff : PCI CardBus #02
a0000000-afffffff : PCI Bus #01
a8000000-afffffff : S3 Inc. VT8751 [ProSavageDDR P4M266] VGA Controller
a8000000-a9eeffff : vesafb
b0000000-b7ffffff : VIA Technologies, Inc. P/KN266 Host Bridge
e0000000-efffffff : PCI Bus #01
e0080000-e00fffff : S3 Inc. VT8751 [ProSavageDDR P4M266] VGA Controller
f0000000-f00007ff : Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
f0000000-f00007ff : ohci1394
f0004000-f0007fff : Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
f0008000-f00080ff : VIA Technologies, Inc. USB 2.0
f0008000-f00080ff : ehci-hcd
f0008100-f00081ff : VIA Technologies, Inc. VT6102 [Rhine-II]
f0008100-f00081ff : via-rhine
fff80000-ffffffff : reserved
+ cat -v /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vesafb
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
1100-110f : VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE
1100-1107 : ide0
1108-110f : ide1
1200-121f : VIA Technologies, Inc. USB
1200-121f : usb-uhci
1300-131f : VIA Technologies, Inc. USB (#2)
4000-40ff : PCI CardBus #02
4400-44ff : PCI CardBus #02
c000-dfff : PCI Bus #01
e000-e0ff : VIA Technologies, Inc. VT8233 AC97 Audio Controller
e000-e0ff : VIA8233
e100-e1ff : VIA Technologies, Inc. AC97 Modem Controller
e200-e2ff : VIA Technologies, Inc. VT6102 [Rhine-II]
e200-e2ff : via-rhine
+ cat -v /proc/dma
4: cascade
+ cat -v /proc/mtrr
reg00: base=0x00000000 ( 0MB), size= 128MB: write-back, count=1
reg01: base=0x08000000 ( 128MB), size= 64MB: write-back, count=1
reg02: base=0x0c000000 ( 192MB), size= 32MB: write-back, count=1
reg03: base=0xa8000000 (2688MB), size= 16MB: write-combining, count=1
reg07: base=0xb0000000 (2816MB), size= 128MB: write-combining, count=1
+ cat -v /proc/partitions
major minor #blocks name rio rmerge rsect ruse wio wmerge wsect wuse running use aveq
3 0 29302560 ide/host0/bus0/target0/lun0/disc 6437 12295 148928 75620 211 252 3736 6610 -1 79130 42926722
3 1 1 ide/host0/bus0/target0/lun0/part1 0 0 0 0 0 0 0 0 0 0 0
3 2 10241437 ide/host0/bus0/target0/lun0/part2 19 0 19 40 0 0 0 0 0 40 40
3 3 8032 ide/host0/bus0/target0/lun0/part3 65 0 65 230 0 0 0 0 0 230 230
3 5 6233157 ide/host0/bus0/target0/lun0/part5 6099 12250 146786 70600 179 242 3384 5700 0 46340 76300
3 6 393561 ide/host0/bus0/target0/lun0/part6 1 0 8 10 0 0 0 0 0 10 10
3 7 12426246 ide/host0/bus0/target0/lun0/part7 247 19 2002 4660 32 10 352 910 0 4990 5570
+ cat -v /proc/mounts
rootfs / rootfs rw 0 0
/dev/root / ext2 rw,noatime 0 0
none /dev devfs rw 0 0
none /proc proc rw 0 0
none /proc/bus/usb usbdevfs rw 0 0
none /dev/pts devpts rw 0 0
/dev/hda7 /home ext2 rw,noatime 0 0
none /mnt/cdrom supermount ro 0 0
none /mnt/floppy supermount rw,sync 0 0
/dev/hda3 /mnt/win_e vfat rw 0 0
/dev/hda2 /mnt/windows vfat rw 0 0
+ cat -v /proc/swaps
Filename Type Size Used Priority
/dev/ide/host0/bus0/target0/lun0/part6 partition 393552 0 -1
+ cat -v /proc/meminfo
total: used: free: shared: buffers: cached:
Mem: 228970496 148848640 80121856 0 3907584 73269248
Swap: 402997248 0 402997248
MemTotal: 223604 kB
MemFree: 78244 kB
MemShared: 0 kB
Buffers: 3816 kB
Cached: 71552 kB
SwapCached: 0 kB
Active: 35412 kB
Inactive: 92468 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 223604 kB
LowFree: 78244 kB
SwapTotal: 393552 kB
SwapFree: 393552 kB
+ cat -v /proc/stat
cpu 1904 0 952 8175
cpu0 1904 0 952 8175
page 74480 1872
swap 1 0
intr 20810 11031 137 0 1 1 2120 3 3 1 0 0 6 615 0 6654 238 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
disk_io: (3,0):(6652,6437,148928,215,3736)
ctxt 60899
btime 1056802355
processes 1969
+ cat -v /proc/apm
1.16 1.2 0x03 0x01 0xff 0x80 -1% -1 ?
+ cat -v /proc/modules
snd-seq-oss 31104 0 (unused)
snd-seq-midi-event 5640 0 [snd-seq-oss]
snd-seq 42608 2 [snd-seq-oss snd-seq-midi-event]
snd-pcm-oss 43556 1
snd-mixer-oss 14488 0 [snd-pcm-oss]
snd-via82xx 14092 5
snd-ac97-codec 40160 0 [snd-via82xx]
snd-pcm 77536 0 [snd-pcm-oss snd-via82xx]
snd-timer 18376 0 [snd-seq snd-pcm]
snd-mpu401-uart 4396 0 [snd-via82xx]
snd-rawmidi 17600 0 [snd-mpu401-uart]
snd-seq-device 5832 0 [snd-seq-oss snd-seq snd-rawmidi]
snd-page-alloc 7732 0 [snd-via82xx snd-pcm]
snd 40868 4 [snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-via82xx snd-ac97-codec snd-pcm snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device]
soundcore 6276 0 [snd]
nfsd 74256 0 (autoclean)
ds 8456 1
yenta_socket 13056 1
pcmcia_core 57184 0 [ds yenta_socket]
af_packet 14952 0 (autoclean)
sr_mod 16920 2 (autoclean)
floppy 55132 0
via-rhine 15056 1 (autoclean)
mii 3832 0 (autoclean) [via-rhine]
ohci1394 19048 0 (unused)
ieee1394 45900 0 [ohci1394]
nls_iso8859-15 4092 2 (autoclean)
nls_cp850 4316 2 (autoclean)
vfat 11820 2 (autoclean)
fat 37944 0 (autoclean) [vfat]
supermount 15296 2 (autoclean)
ide-cd 33856 0
cdrom 31648 0 [sr_mod ide-cd]
ide-scsi 11280 1
scsi_mod 103284 2 [sr_mod ide-scsi]
ehci-hcd 18568 0 (unused)
usb-uhci 24652 0 (unused)
usbcore 72992 1 [ehci-hcd usb-uhci]
rtc 8060 0 (autoclean)
+ cat -v /proc/ldiscs
cat: /proc/ldiscs: No such file or directory
+ modprobe -V
modprobe: Nothing to load ???
Specify at least a module or a wildcard like \*
modprobe version 2.4.22
+ modprobe -l *hsfserial*
/lib/modules/2.4.21-0.13mdk/misc/hsfserial.o
+ cat -v /etc/modules.conf
probeall scsi_hostadapter ide-scsi
above snd-via82xx snd-pcm-oss
alias eth0 via-rhine
alias sound-slot-0 snd-via82xx
probeall usb-interface usb-uhci ehci-hcd
alias ieee1394-controller ohci1394
alias /dev/ttySHSF* hsfserial
alias char-major-240 hsfserial
alias /dev/ttyCUA* hsfserial
alias char-major-241 hsfserial
alias /dev/modem hsfserial
options hsfserial serialmajor=240 calloutmajor=241
+ depmod -e -a
+ cat -v /proc/tty/drivers
serial /dev/cua/%d 5 64-127 serial:callout
serial /dev/tts/%d 4 64-127 serial
pty_slave /dev/pts/%d 136 0-255 pty:slave
pty_master /dev/ptm 128 0-255 pty:master
pty_slave /dev/pty/s%d 3 0-255 pty:slave
pty_master /dev/pty/m%d 2 0-255 pty:master
/dev/vc/0 /dev/vc/0 4 0 system:vtmaster
/dev/ptmx /dev/ptmx 5 2 system
/dev/console /dev/console 5 1 system:console
/dev/tty /dev/tty 5 0 system:/dev/tty
unknown /dev/vc/%d 4 1-63 console
+ cat -v /proc/tty/driver/serial
serinfo:1.0 driver:5.05c revision:2001-07-08
+ ls -l /dev/modem*
ls: /dev/modem*: No such file or directory
+ ls -l /dev/*HSF*
ls: /dev/*HSF*: No such file or directory
+ ls -l /dev/*cnxt*
ls: /dev/*cnxt*: No such file or directory
+ ls -l /dev/*hsf*
ls: /dev/*hsf*: No such file or directory
+ ls -l /dev/ttyS*
ls: /dev/ttyS*: No such file or directory
+ ls -l /dev/tts*
ls: /dev/tts*: No such file or directory
+ ls -lR /usr/lib/hsf/.
/usr/lib/hsf/.:
total 8
-r--r--r-- 1 root root 2986 avr 27 20:25 LICENSE
drwxr-xr-x 3 root root 4096 jun 28 12:08 modules
/usr/lib/hsf/./modules:
total 24
drwxr-xr-x 3 root root 4096 jun 28 12:08 binaries
-r--r--r-- 1 root root 18894 mai 22 2002 COPYING
/usr/lib/hsf/./modules/binaries:
total 4
lrwxrwxrwx 1 root root 4 jun 28 12:08 athlon -> i586
drwxr-xr-x 3 root root 4096 jun 28 12:08 i586
lrwxrwxrwx 1 root root 4 jun 28 12:08 i686 -> i586
/usr/lib/hsf/./modules/binaries/i586:
total 4
drwxr-xr-x 3 root root 4096 jun 28 12:08 mdk
/usr/lib/hsf/./modules/binaries/i586/mdk:
total 4
drwxr-xr-x 2 root root 4096 jun 28 12:08 linux-2.4.21-0.13mdk
/usr/lib/hsf/./modules/binaries/i586/mdk/linux-2.4.21-0.13mdk:
total 1980
-r--r--r-- 1 root root 122194 avr 27 20:25 hsfali.o
-r--r--r-- 1 root root 121213 avr 27 20:25 hsfbasic2.o
-r--r--r-- 1 root root 1323886 avr 27 20:25 hsfengine.o
-r--r--r-- 1 root root 121656 avr 27 20:25 hsfich.o
-r--r--r-- 1 root root 40466 avr 27 20:25 hsfosspec.o
-r--r--r-- 1 root root 29772 avr 27 20:25 hsfserial.o
-r--r--r-- 1 root root 126573 avr 27 20:25 hsfvia.o
-r--r--r-- 1 root root 105339 avr 27 20:25 hsfyukon.o
+ dmesg
Linux version 2.4.21-0.13mdk (flepied at bi.mandrakesoft.com) (gcc version 3.2.2 (Mandrake Linux 9.1 3.2.2-3mdk)) #1 Fri Mar 14 15:08:06 EST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
BIOS-e820: 000000000dff0000 - 000000000dffffc0 (ACPI data)
BIOS-e820: 000000000dffffc0 - 000000000e000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
223MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 57328
zone(0): 4096 pages.
zone(1): 53232 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda5 quiet devfs=mount hdc=ide-scsi acpi=off vga=788
ide_setup: hdc=ide-scsi
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 1525.881 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3040.87 BogoMIPS
Memory: 223420k/229312k available (1410k kernel code, 5504k reserved, 1118k data, 136k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183fbff c1cbfbff 00000000 00000000
CPU: Common caps: 0183fbff c1cbfbff 00000000 00000000
CPU: AMD Athlon(tm) XP 1800+ stepping 01
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1525.8875 MHz.
..... host bus clock speed is 265.3718 MHz.
cpu: 0, clocks: 2653718, slice: 1326859
CPU0<T0:2653712,T1:1326848,D:5,S:1326859,C:2653718>
mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030122
ACPI: Disabled via command line (acpi=off)
PCI: PCI BIOS revision 2.10 entry at 0xe8a04, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/3177] at 00:11.0
PCI: Cannot allocate resource region 0 of device 00:0a.0
PCI: Via IRQ fixup for 00:10.1, from 255 to 0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x1
vesafb: framebuffer at 0xa8000000, mapped to 0xce800000, size 31680k
vesafb: mode is 800x600x16, linelength=1600, pages=32
vesafb: protected mode interface info at c000:8d0e
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 25593 bytes).
Console: switching to colour frame buffer device 80x16
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
PCI: No IRQ known for interrupt pin A of device 00:11.1. Please try using pci=biosirq.
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
hda: IC25N030ATCS04-0, ATA DISK drive
hda: DMA disabled
blk: queue c03cb420, I/O limit 4095Mb (mask 0xffffffff)
hdc: UJDA740 DVD/CDRW, ATAPI CD/DVD-ROM drive
hdc: DMA disabled
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 58605120 sectors (30006 MB) w/1768KiB Cache, CHS=3648/255/63, UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 < p5 p6 p7 > p2 p3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 47k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 15:32:56 Mar 14 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0x1200, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: No IRQ known for interrupt pin B of device 00:10.1. Please try using pci=biosirq.
usb-uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
ehci-hcd 00:10.3: VIA Technologies, Inc. USB 2.0
ehci-hcd 00:10.3: irq 11, pci mem d080e000
usb.c: new USB bus registered, assigned bus number 2
ehci-hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2002-Dec-20
hub.c: USB hub found
hub.c: 4 ports detected
usbdevfs: remount parameter error
Adding Swap: 393552k swap-space (priority -1)
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: MATSHITA Model: UJDA740 DVD/CDRW Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
MSDOS FS: IO charset iso8859-15
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-15
MSDOS FS: Using codepage 850
ohci1394: $Rev: 693 $ Ben Collins <bcollins at debian.org>
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f0000000-f00007ff] Max Packet=[2048]
ieee1394: SelfID completion called outside of bus reset!
ieee1394: Host added: Node[00:1023] GUID[00c09f00000a5368] [Linux OHCI-1394]
via-rhine.c:v1.10-LK1.1.15 November-22-2002 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6102 Rhine-II at 0xe200, 00:c0:9f:24:ab:fb, IRQ 11.
eth0: MII PHY found at address 1, status 0x7809 advertising 01e1 Link 0000.
inserting floppy driver for 2.4.21-0.13mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Linux Kernel Card Services Kernel Version
options: [pci] [cardbus] [pm]
Yenta IRQ list 0098, PCI irq11
Socket status: 30000007
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
PCI: Setting latency timer of device 00:11.5 to 64
Splash status on console 0 changed to off
spurious 8259A interrupt: IRQ7.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
PCI: Setting latency timer of device 00:11.6 to 64
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
More information about the hsflinux
mailing list