[hsflinux] Verifying HSF works with minicom

[Linuxant modem support]

Hi,

please send us the file generated by the command "hsfconfig --dumpdiag".
This will provide the information necessary to diagnose your problem.

As for Exim, you might want to take a look at the book published by
O'Reilly. It should be pretty good, but I haven't read it myself so don't
take my word for it.

http://safari.oreilly.com/?XmlId=0-596-00098-7

There are probably many free documents on the Internet. You probably just
need to search for "exim setup" or "exim administration" on your favorite
search engine.

Regards,

Jean-Simon Durand
Technical specialist / Linuxant
www.linuxant.com
modem.support at linuxant.com


----- Original Message ----- 
From: "William Kearney" <TremaSol at gbronline.com>
To: <hsflinux at lists.mbsi.ca>
Sent: Monday, June 30, 2003 2:42 PM
Subject: [hsflinux] Verifying HSF works with minicom


Hello. I'm using a debian distribution and ran (successfully) hsfconfig. I
shutdown the system restarted and ran minicom. I turned local echo on and
under the configuration menu noticed that ttyS3 was the serial port in use.
However I get no response from minicom to my commands. I changed the serial
port of /dev/ttySHSF0.

hsfconfig indicates that this is the proper port for accessing the modem,
but I still get no response to my commmands. Any help in this matter will be
appreciated.

Also, I recall when installing debian woody that the mail system was broken
under Exim.  Does anyone know where I can go to get information on how to
configure Exim? Thanks.

-Will K