[hsflinux] hsfconfig problems under CL9

[Linuxant modem support]

Hi,

my guess is that you are using a kernel from Conectiva 9 but your kernel
sources do not match this kernel and you are trying to compile the driver
modules with these sources.

You should configure your kernel sources and then compile your own custom
kernel. Once you booted with your own kernel, recompile the driver modules
again using this properly configured kernel source tree.

Regards,

Jean-Simon Durand
Technical specialist / Linuxant
www.linuxant.com
modem.support at linuxant.com


----- Original Message ----- 
From: "Jethro Mendonça" <jethrodawnfine at hotmail.com>
To: <hsflinux at lists.mbsi.ca>
Sent: Tuesday, July 08, 2003 11:42 PM
Subject: [hsflinux] hsfconfig problems under CL9


Please, I'm having problems when running hsfconfig under Conectiva 9...

Yes, after installing Conectiva 9 for the 2nd time I've got problems while
running hsfconfig... I've installed it fine on the first time, when I chose
to install CL9 using Personal Install option... and chose all the packages I
needed... Then my modem installed ok and work very smooth... but despite
some other problems, I simply had to reinstall my linux, and this time, just
to get a faster installation, I chose the Desktop option... To my surprise,
it didn't install neither MAKE nor GCC... ok, got them installed and now I
could finally compile hsf drivers... but when I tried to run hsfconfig, it
couldn't create the devices...
It gave me this message:

Re-compiling HSF modules for kernel 2.4.21-28872cl, using source directory
/lib/modules/2.4.21-28872cl/build. Please wait..
Re-compilation and installation of HSF modules succeeded.
depmod: *** Unresolved symbols in
/lib/modules/2.4.21-28872cl/misc/hsfosspec.o
depmod:         filp_open_R9cb2426c
depmod:         irq_stat_R655d4354
depmod:         filp_close_Rf7c6fb8e
depmod:         default_llseek_R39d60f6b
depmod: *** Unresolved symbols in
/lib/modules/2.4.21-28872cl/misc/hsfserial.o
depmod:         tty_get_baud_rate_R297f28e5
depmod:         tty_register_devfs_R7e978173
depmod:         tty_hangup_Re662fd3d
depmod:         remove_wait_queue_Rec7f7c05
depmod:         tty_register_driver_R5a602f22
depmod:         add_wait_queue_R55af3895
depmod:         tty_unregister_driver_Rf967e2ee
depmod:         tty_hung_up_p_Rf201bbe2
depmod:         tty_wait_until_sent_R951d6b7c
depmod:         tty_flip_buffer_push_R4b250662

Your HSF modem should now be accessible as /dev/ttySHSF0
or through the symbolic link /dev/modem. <------------------------ NO!!!
THEY WERE NOT CREATED!!!!!

Oh, by the way, I'm using hsflinmodem5.03.03.01mbsibeta02052102.tar.gz since
it's really the most stable driver version for my modem.

So, do you guys think you could give me a hand here?

Jethro Mendonça