[hsflinux] Still not supported...

[Linuxant modem support]

Hi,

I made a small mistake. The device is not "/dev/ttySHCF0", but
"/dev/ttySHSF0".

"/dev/modem" also works if it's a symbolic link pointing to "/dev/ttySHSF0".

Jean-Simon


----- Original Message ----- 
From: "Linuxant modem support" <modem.support at linuxant.com>
To: "Edward Smith" <ensmith at pacific.net.au>; <hsflinux at lists.linuxant.com>
Sent: Monday, August 25, 2003 5:51 PM
Subject: Re: [hsflinux] Still not supported...


Hi,

the easiest way to test your modem would be to use a terminal program like
minicom. This would allow you to verify the basic functionnality without
involving a complex software like the ppp dialer.

In minicom's configuration, you have to set the device to "/dev/modem" or
"/dev/ttySHCF0".

If the modem works properly, you will be able to send some "AT" commands to
it like these:

AT
ATI0
ATI1
...
ATI9
ATZ

Then, I suggest you send the command "AT &F W1 +ER=1; +DR=1" to initialize
the modem and try to connect to your ISP's phone number to see if it works
properly. The command to dial is "ATDT phone_number" (eg. ATDT 555-1234).

If you can't access the modem properly, please run "hsfconfig --dumpdiag"
and send us the file that it generates.

Regards,

Jean-Simon Durand
Technical specialist / Linuxant
www.linuxant.com
modem.support at linuxant.com


----- Original Message ----- 
From: "Edward Smith" <ensmith at pacific.net.au>
To: <hsflinux at lists.linuxant.com>
Sent: Saturday, August 23, 2003 11:43 PM
Subject: [hsflinux] Still not supported...


Hi,
      The internet connection wizard says that it doesn't support the modem
still. The install of the drivers went fine as far as I can see. I have both
/dev/modem and /dev/ttySHSFO.
 My modem is a 14f1:2f00, running on a Mandrake 9.1 with 2.4.21-0.13mdk
kernal. modprobe hsfserial didn't show anything of interest and nor did
dmesg.

  I have I tried depmod --all, nothing that i could see happened.

Edward