[hsflinux] bad init
Ismael Simoes
ismael.simoes at free.fr
Thu Nov 6 23:37:16 EST 2003
I use this modem in a Linux only machine.
But I downloaded the scanModem utility.
There is the log :
-------------- System information ------------------------
Not_identified
on system: Linux ismaserver 2.4.18-5 #1 Mon Jun 10 15:14:29 EDT 2002
i586 unknown"
GCC=2.96
UPDATE=2003 November 6
Checking for modem drivers in the Microsoft partition
An AC'97 modem codec was not detected
Path to lspci is: /sbin/lspci
--------- lspci scan ----------------
PCI_bus
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 540 Host (rev 01)
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513
00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
10/100 Ethernet (rev 80)
00:01.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07)
00:01.3 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07)
00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS]
SiS PCI Audio Accelerator (rev 01
)
00:02.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP
00:0b.0 Class ffff: Rockwell International HSF 56k Data/Fax/Voice Modem
(rev 01)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
SiS540 PCI Display Adapter (rev 01)
-------------------------------------
Modem candidates are at PCI_buses: 00:0b.0
Providing detail for device at PCI_bus:
00:0b.0
00:0b.0 Class ffff: 127a:2014 (rev 01) (prog-if ff)
Subsystem: 144e:2014
00:0b.0 Class ffff: Rockwell International HSF 56k Data/Fax/Voice Modem
(rev 01) (prog-if ff)
Subsystem: OLITEC: Unknown device 2014
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at dd100000 (32-bit, non-prefetchable) [size=64K]
I/O ports at e800 [size=8]
Capabilities: [40] Power Management version 2
Primary PCI_id: 127a:2014
with VendorID: 127a
and DeviceID: 2014
SubSystem PCI_id: 144e:2014
with subVendorID: 144e
and subDeviceID: 2014
=== Checking 127a through chipset providers and modem assemblers ====
Vendors 127a and 14f1 are Conexant, successor to Vendor=148d Rockwell
technology.
Additional modems with the following PCI_IDs have Conexant HCF
(Controller free) chipsets.
1024:1024 (Zenith Data Systems)
148D:1003 (DIGICOM Systems)
158B:0015 (Allied Data Technologies Tornado VFM56x-PRC)
141A:1035 (Apache Micro)
Subsystem HSF Conexant soft modems serve under AC'97 or MC97 controllers.
Download driver kits: http://www.linuxant.com/drivers
As of September 2004, Linuxant is providing for free test drivers for
low speed CONNECTs.
There is a one time subscription fee for high speed support.
Should a HCF driver installation fail to serve, then uninstall and
instead try
the HSF driver resource. Some PCI_ID mis-labeling has been
reported with
the HCF 127a:1025 most suspect.
A post install suggestion for adjusting PCI latency is:
http://phep2.technion.ac.il/linmodems/archive/msg05210.html
=== Checking 144e through chipset providers and modem assemblers ====
======= PCI_ID checking completed ======
Update=2003 November 6
Thanks a lot for your help.
IS
Home wrote:
> Maybe it would be helpful to know the hardware specifics of the modem. Do
> you have any information that was obtained from Windows about the modem? IO
> and IRQ?
>
> -----Original Message-----
> From: hsflinux-bounces at lists.linuxant.com
> [mailto:hsflinux-bounces at lists.linuxant.com]On Behalf Of Ismael Simoes
> Sent: Thursday, November 06, 2003 6:19 AM
> To: hsflinux at lists.linuxant.com
> Subject: [hsflinux] bad init
>
> Hello,
>
> I'm trying to use a HSF modem.
> I installed the free driver for testing.
> But I can use the modem.
>
> THanks a lot for your help
>
> There is a part of the log file:
>
>
> + modprobe -v /dev/ttySHSF
> /sbin/insmod /lib/modules/2.4.18-5/misc/hsfmc97ich.o
> Using /lib/modules/2.4.18-5/misc/hsfmc97ich.o
> Symbol version prefix ''
> /lib/modules/2.4.18-5/misc/hsfmc97ich.o: init_module: No such device
> /lib/modules/2.4.18-5/misc/hsfmc97ich.o: insmod
> /lib/modules/2.4.18-5/misc/hsfmc97ich.o failed
> Hint: insmod errors can be caused by incorrect module parameters,
> including invalid IO or IRQ parameters
> /sbin/insmod /lib/modules/2.4.18-5/misc/hsfmc97via.o
> Using /lib/modules/2.4.18-5/misc/hsfmc97via.o
> /lib/modules/2.4.18-5/misc/hsfmc97via.o: init_module: No such device
> /lib/modules/2.4.18-5/misc/hsfmc97via.o: insmod
> /lib/modules/2.4.18-5/misc/hsfmc97via.o failed
> Hint: insmod errors can be caused by incorrect module parameters,
> including invalid IO or IRQ parameters
> /sbin/insmod /lib/modules/2.4.18-5/misc/hsfmc97ali.o
> Using /lib/modules/2.4.18-5/misc/hsfmc97ali.o
> /lib/modules/2.4.18-5/misc/hsfmc97ali.o: init_module: No such device
> /lib/modules/2.4.18-5/misc/hsfmc97ali.o: insmod
> /lib/modules/2.4.18-5/misc/hsfmc97ali.o failed
> Hint: insmod errors can be caused by incorrect module parameters,
> including invalid IO or IRQ parameters
>
> + lsmod
> Module Size Used by Not tainted
> hsfpcibasic2 49752 0 (unused)
> hsfserial 32032 0 [hsfpcibasic2]
> hsfengine 537696 0 [hsfserial]
> hsfosspec 53760 2 [hsfpcibasic2 hsfserial hsfengine]
> hsfsoar 51272 0 [hsfpcibasic2]
> printer 8288 0 (unused)
> appletalk 24236 12 (autoclean)
> sis900 15044 1
> ide-scsi 9632 0
> ide-cd 30592 0
> cdrom 32160 0 [ide-cd]
> scsi_mod 108240 1 [ide-scsi]
> hid 20928 0 (unused)
> input 5792 0 [hid]
> usb-ohci 20928 0 (unused)
> usbcore 72096 0 [printer hid usb-ohci]
> ext3 67360 2
> jbd 48856 2 [ext3]
>
>
> _______________________________________________
> hsflinux mailing list
> hsflinux at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/hsflinux
>
>
More information about the hsflinux
mailing list