[hsflinux] Pulse dialing problem

[Nikola Lecic]

Hello,

(SuSE 8.2, Dell i5100,
hsfmodem-6.03.00lnxt03111100free_k2.4.20_4GB-1suse.i586)

I sometimes have to use pulse dialing and have very strange problem:
 modem can't dial any digit after dialing '9' or '0' (?). For example, if
 the number is '359333', it will dial 359 and then become silent until
 automatic disconnect. It can dial any number withour '0' or '9' without
 problems.

(In older version I used,
hsflinmodem-5.03.27lnxtbeta03042700k2.4.20_4GB-1suse.i586, modem could
 dial only first digit in pulse mode, regardless of what digit it was.)

I attached zipped output of hsfconfig --dumpdiag. Also, I use wvdial for
dialing, with options:

Modem = /dev/modem
Baud = 57600
Init1 = ATX1
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Phone = ...
Username = ...
Password = ...
Ask Password = 0
Dial Command = ATDP
#Dial Command = ATDT
Stupid Mode = 1
Auto DNS = 1
Check DNS = 0

My /etc/ppp/options are:


noipdefault
noauth
crtscts
lock
modem
asyncmap 0
nodetach
lcp-echo-interval 30
lcp-echo-failure 4
lcp-max-configure 60
lcp-restart 2
idle 600
noipx
file /etc/ppp/filters

Thanks a lot in advance.

Nikola
-------------- next part --------------
A non-text attachment was scrubbed...
Name: hsfdiag.txt.zip
Type: application/x-zip-compressed
Size: 19257 bytes
Desc: not available
Url : http://www.linuxant.com/pipermail/hsflinux/attachments/20031117/4b34d071/hsfdiag.txt.bin