[hsflinux] A problem occured hm...

[Sérgio Monteiro Basto]

On Sat, 2002-10-05 at 10:37, Vladimir Ivanovski wrote:
> Hello! I got the following problem:
> I can't use my Conexant modem on MandrakeLinux.
> My Kernel is 2.4.18_6mdk , so I downloaded and installed    hsflinmodem-5.03.03.L3mbsibeta02093000k2.4.18_6mdk-1mdk.i586.rpm
> Here is the info from the modem detection program (listmodem) :
> 
> =====================================================================
> =              SYSTEM INFORMATION                                   =
> =====================================================================
> Date         : 10/3/2001
> ListMdm Ver  : 1.6
> Windows OS   : Microsoft Windows 98
> Build Number : 4.10.2222
> 
> =====================================================================
> =              RESULT OF MODEM QUERY                                =
> =====================================================================
> NUMBER OF MODEMS FOUND = 1
> 
> MODEM #1:
>   PCI CONFIGURATION INFORMATION READ:
>      VENDOR ID              : 127A
>      DEVICE ID              : 1025
>      SUBVENDOR ID           : 127A
>      SUBDEVICE ID           : 1025
>      REVISION ID            : 01
> 
>   DEDUCED INFORMATION:
>      VENDOR NAME            : ROCKWEL
>      DEVICE NAME            : CHECK CHIPSET FOR CORRECT MODEM
>      SUBVENDOR NAME         : UNKNOWN
>      MODEM TYPE             : Check chipset for correct drivers
>      WINXP INBUILD SUPPORT  : YES
> 
> I can't open /dev/modem because Mandrake tells me that "there is no program associated with /dev/modem" or sth.
> I opened the modem info using HardDrake but HardDrake had already found my modem to be HCF and when I tried to set a Conexant HSF modem active from the list, Mandrake reported: "I cannot use Winmodems" or sth...
> And at the same time it had hsflinmodem-5.03.03.L3mbsibeta02093000k2.4.18_6mdk-1mdk.i586.rpm  installed.
> I am ABSOLUTELY new to Linux,so I need your help badly.
> Thank you,guys!
> 

after install modem or rpm 
i think  that you must type hsfconfig as root
to configure link etc ...