[hsflinux] Problem with drivers on 2.6.1

[sharpie at atice.org]

Hi,

I am having problems using the drivers on the 2.6.x range of kernels. I
have tried out both the stock 2.6.0 & 2.6.1 kernels with the same results.
After running hsfconfig (the modules build okay) I get the following in dmesg

PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
devfs_mk_cdev: invalide mode (0) for hsfdcp0
devfs_mk_cdev: invalide mode (0) for hsfdiag0
ttySHSF0 at I/O 0x1400 (irq = 10) is a Conexant HSF softmodem
call_dcp_daemon: /usr/sbin/hsfdcpd returned 512
devfs_remove: hsfdcp0 not found, cannot remove
Call Trace:
 [<c01a273a>] devfs_remove+0xae/0xb0
 [<c01d79ce>] snprintf+0x27/0x2b
 [<c89c403e>] cnxthsf_DcpDestroy+0x18e/0x220 [hsfosspec]
 [<c8b85b95>] hsfengine298_+0x15/0x30 [hsfengine]
 [<c8b4ecd0>] hsfengine1864_+0x20/0x40 [hsfengine]
 [<c8b4b453>] hsfengine641_+0x83/0x100 [hsfengine]
 [<c8b32620>] cnxthsf_ComCtrl_Close+0x70/0xa0 [hsfengine]
 [<c8978685>] cnxthsf_cnxt_serial_remove+0x115/0x1e0 [hsfserial]
 [<c0167655>] iput+0x62/0x7c
 [<c8a117f3>] cnxthwpci_remove+0x13/0x50 [hsfmc97ali]
 [<c01da9ed>] pci_device_remove+0x3b/0x3d
 [<c02110f6>] device_release_driver+0x64/0x66
 [<c0211118>] driver_detach+0x20/0x2e
 [<c0211335>] bus_remove_driver+0x3d/0x75
 [<c02116e0>] driver_unregister+0x13/0x28
 [<c01dab48>] pci_unregister_driver+0x12/0x16
 [<c8a1183a>] cnxthwpci_cleanup+0xa/0x10 [hsfmc97ali]
 [<c012ffd5>] sys_delete_module+0x123/0x161
 [<c01431be>] sys_munmap+0x44/0x64
 [<c010931f>] syscall_call+0x7/0xb

devfs_remove: hsfdiag0 not found, cannot remove
Call Trace:
 [<c01a273a>] devfs_remove+0xae/0xb0
 [<c01d79ce>] snprintf+0x27/0x2b
 [<c89c35a3>] OsDiagExit+0x183/0x260 [hsfosspec]
 [<c0156e1f>] unregister_chrdev+0x4d/0x61
 [<c012ffd5>] sys_delete_module+0x123/0x161
 [<c01431be>] sys_munmap+0x44/0x64
 [<c010931f>] syscall_call+0x7/0xb

devfs_mk_cdev: invalide mode (0) for hsfdcp0
devfs_mk_cdev: invalide mode (0) for hsfdiag0
ttySHSF0 at I/O 0x1400 (irq = 10) is a Conexant HSF softmodem

After rebooting the machine I then try to modprobe hsfmc97ali (this is the
same module I used under 2.4.x with no issues) and the machine hangs. When
I restart again I find the following in my log files,

[kernel] hsfmc97ali: Unknown symbol cnxthsf_cnxt_serial_add
[kernel] hsfmc97ali: Unknown symbol cnxthsf_cnxt_serial_remove

I am running version 6.03.00lnxt03122800full of the drivers.

thanks,

Michael