[hsflinux] hsfmodem-6.03.00lnxt04072900full and kernel 2.6.8.1

[Linuxant support (Jonathan)]

Hi,

while using the 2.6.8.1 kernel and the latest version of the HSF driver 
package, please send at support at linuxant.com the output of 'dumpdiag'. 
Type the following in a root shell:

---
hsfconfig --dumpdiag
---

Just send us the generated file located in /tmp ('hsfdiag.txt'). You 
should also send us your kernel configuration file.

We will try to reproduce the problem with this information.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com


Chris Vine wrote:
> I am using the latest full version of the HSF modem driver 
> (hsfmodem-6.03.00lnxt04072900full).
> 
> This works fine with stock kernel 2.6.7.  Although it compiles successfully 
> with stock kernel 2.6.8.1, responds correctly to "AT" commands and connects 
> to my ISP at my normal speed (around 50Kbits/s), when downloading anything of 
> any significant size, after an initial burst of downloading at normal speed 
> it then only receives bytes in short bursts.  Average download speeds fall 
> from around the normal 4.9KB/s to below 1KB/s.
> 
> As I have mentioned, the modem driver works fine with kernel 2.6.7 (to which I 
> have now reverted) and also with the 2.4 series.
> 
> lspci reports my modem as "Conexant HSF 56k Data/Fax/Voice/Spkp Modem (rev 
> 01)".
> 
> Chris.
> _______________________________________________
> hsflinux mailing list
> hsflinux at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/hsflinux