[hsflinux] hsflinux: Cannot open modem on Suse9.1: NO CARRIER [eid-20040825-d6c]

Thu Aug 26 13:41:09 EDT 2004

Hi again Jonathan

The modem still doesn't respond... always "NO CARRIER"
Little summary below:
- I download hsfmodem-6.03.00lnxt04072900full_k2.6.4_52_default-1suse.i586.rpm
  module and install it on my Suse 91 OS
- I configure with hsconfig, leaving default values when asked and writing
"ITALY" at the end
- I tried to dial with the string :
	AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1;W2
        ATS7=60M1+ES=3,0,2;+DS=3;+IFC=2,2;X4
  like the Modem.txt log file of WinXP modem activities said
- I tried with AT &F X1, besides that values.
- I put "pci=noacpi" into lilo.conf
- I modified OEM_FLAGS with values you said.

my modem initializes, accepts the string , but does not compose the number..
in any way....
may the plugged in ethernet cable conflicts?
may some IRQ be erroneous?
I tried to install OS from scratch again, avoiding to load smartlink modem
module as
i was asked for at installation prompt (like it find the modem to be smartlink)
This time i don't have slamr module loaded, but when I first tried to configure
modem (It gave me the correct model: "Fujitsu Intel 537 [AC97 Modem]", like
into
WinXP system I have) I was asked, by default, to add smartlink driver (present
into distribution CD) I answer "no" and I had to configure a generic modem,
with modem device "/dev/modem".
Was it correct.
The final results are the same... all is ok but when it tried to dial it
cannot...
Let me know if there are some other ways.... perhaps another driver....
or if you need 
other info
When I had Mandrake 9.0 (with kernel 2.4.x) into my system, I used Conexant
driver and the modem worked.... now I cannot see any light... tell me if
I have any hope besides to go back  to Mandrake 9...

Thanks for you kind help....
bye for now
Gabriele

>-- Messaggio originale --
>To: gab.cris at virgilio.it
>Subject: Re: [hsflinux] hsflinux: Cannot open modem on Suse9.1: NO CARRIER
>[eid-20040825-d6c]
>From: Linuxant support (Jonathan) <support at linuxant.com>
>Date: Wed, 25 Aug 2004 13:21:47 -0400 (EDT)
>
>
>Hi,
>
>this is the script in the '/etc/init.d/' directory. Since you have disabled
>the 'slamr' module, you can safely ignore this init script.
>
>To fix the HSF driver problem, please edit the file
>'/etc/hsfmodem/nvm/hsfmc97via/OEM_FLAGS' and this file should have the
>following contents :
>
>---
>02,02,0C,00
>---
>
>Save the file and then run the following commands in a root shell :
>
>---
>hsfstop
>modprobe /dev/ttySHSF
>---
>
>Regards,
>
>
>Jonathan
>Technical specialist / Linuxant
>www.linuxant.com
>support at linuxant.com
>
>
>----- Original Message -----
>From: gab.cris at virgilio.it
>To: support at linuxant.com
>Sent: Wednesday, August 25, 2004 11:20 AM
>Subject: Re: [hsflinux] hsflinux: Cannot open modem on Suse9.1: NO CARRIER
>[eid-20040825-d6c]
>
>Hi again Jonathan
>
>I've just close my system and I now see the exact message:
>"Shutting down Smartlink modem driver"
>
>and so, in startup, it is:
>"Starting Smartlink modem driver"
>
>where does it pick this info? into modules? or into init.d?? but I commen=
>ted
>them...
>
>thanks again.. so much. for your kind help :)
>
>Gabriele
>
>
>
>>-- Messaggio originale --
>>To: gab.cris at virgilio.it
>>Subject: Re: [hsflinux] hsflinux: Cannot open modem on Suse9.1: NO CARRI=
>ER
>>[eid-20040825-d6c]
>>From: Linuxant support (Jonathan) <support at linuxant.com>
>>Date: Wed, 25 Aug 2004 09:51:55 -0400 (EDT)
>>
>>
>>Hi,
>>
>>Could you send us the output of 'dumpdiag' please? Type the following
in=
>
>>a
>>root shell:
>>
>>---
>>hsfconfig --dumpdiag
>>---
>>
>>Just send us the generated file located in /tmp ('hsfdiag.txt').
>>
>>You should also send us the .INF file as well as the .CTY files used by
>the
>>Windows XP driver.
>>
>>All this information will help us solve the problem.
>>
>>Regards,
>>
>>
>>Jonathan
>>Technical specialist / Linuxant
>>www.linuxant.com
>>support at linuxant.com
>>
>>
>>----- Original Message -----
>>From: gab.cris at virgilio.it
>>To: support at linuxant.com
>>Sent: Wednesday, August 25, 2004 4:36 AM
>>Subject: [hsflinux] hsflinux: Cannot open modem on Suse9.1: NO CARRIER
>>
>>Hi again Jonathan
>>
>>I just tried your  string AT &F X1 but it's the same..
>>i also added "pci=3D3Dnoapci" into kernel boot parameters but it doesn't=
>
>wo=3D
>>rk..
>>I'm not sure i understand when i have to pick up the phone..
>>my phone cable is connected into PC modem output...
>>when shall I exactly pick up? my phone is not connected indeed...
>>..when I launch ATDTXXXXX I hear a click into my notebook but I can't
he=
>a=3D
>>r
>>it dialing,
>>though I set "speaker on" into settings. Into XP mode, I hear the modem
>>dialing.
>>I don't know how to proceed now.....
>>..if yu need other logs or other info please let me know.....
>>thanks for now for your kind help.... hope to see the light....
>>
>>bye
>>Gabriele
>>
>>
>>>-- Messaggio originale --
>>>To: gab.cris at virgilio.it
>>>Subject: Re: =3D3D?ISO-8859-15?Q?Re=3D3D3A=3D3D20=3D3D5Bhsflinux=3D3D5D=
>=3D3D20Cannot=3D
>>=3D3D20open=3D3D20modem=3D3D20on=3D3D20Suse=3D3D209=3D3D2E1=3D3D20=3D3D2=
>D=3D3D20no=3D3D20such=3D
>>=3D3D20device=3D3D20or=3D3D09address
>>>From: Linuxant support (Jonathan) <support at linuxant.com>
>>>Date: Tue, 24 Aug 2004 10:38:40 -0400 (EDT)
>>>
>>>
>>>Hi,
>>>
>>>it is possible that the problem is that the NVM settings are not the
sa=
>m=3D
>>e
>>>in Windows and in Linux but this is rather uncommon as the source of
>>>problem. We will try something else first. This information is for SuSE=
>
>>but
>>>this information is similar for Mandrake.
>>>
>>>You could try to use the following initilization string instead :
>>>
>>>---
>>>AT &F X1
>>>---
>>>
>>>If it doesn't help, please try to boot with the 'pci=3D3Dnoapci' kwerne=
>l
>b=3D
>>oot
>>>parameter.
>>>
>>>If you require more assistance, please pick up the phone before you use=
>
>>the
>>>'ATDTxxxxxx' command to dial. When you ask the modem to dial, do you
he=
>a=3D
>>r
>>>a
>>>'click' then hear the modem dialing?
>>>
>>>Regards,
>>>
>>>
>>>Jonathan
>>>Technical specialist / Linuxant
>>>www.linuxant.com
>>>support at linuxant.com
>
>