[hsflinux] Conflicts with soud card
Linuxant support (Jonathan)
support at linuxant.com
Sat Sep 25 12:31:40 EDT 2004
Hi,
which module(s) do you have to disable to use the modem driver? Only the
'snd-intel8x0m' module? It this is the case, you could remove this
module from your kernel, insert the HSF modules into the kernel with the
'modprobe /dev/ttySHSF' command in a root shell and then try to insert
the 'snd-intel8x0m' module again in your kernel.
For the pre-compiled RPM failure, please install the pre-compiled RPM
again, you will have to remove the already installed RPM package with
the 'rpm -e driverloader' command in a root shell if you have installed
the RPM package.
While the pre-compiled RPM package is installed, please send us the
output of 'dumpdiag'. Type the following in a root shell:
---
dldrconfig --dumpdiag
---
Just send us the generated file located in /tmp ('driverloaderdiag.txt').
It'll help us solve the problem.
Regards,
Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com
D. Gutierrez wrote:
> Hi,
>
> I'm having problems with the Mandrake drivers for an hsf modem. Even
> though I'm able to use the modem, I get this error when configuring
>
> Note: kernel module snd-intel8x0m temporarily disabled, conflicts with
> hsfmc97ich
>
> So, when I want to use the modem, I have to disable the sound module...
> any ideas on how to solve this? Below is the full "dumpdiag".
>
> Thanks!
>
> DG
>
> P.S. I'm using the full drivers because the pre-compiled one didn't work.
More information about the hsflinux
mailing list