[hsflinux] Newbie with errors on hsf install...

[Linuxant support (Jonathan)]

Hi,

the problem is not this warning message:

---
warning: hsfmodem-7.18.00.03full_k2.6.9_1.667.stk16-1fdr.i686.rpm: V3
DSA signature: NOKEY, key ID 5dfbf7dc
---

that you can safely ignore. Since you have a MC97 modem connected to the 
AC97 bus, this modem can be from various manufacturers and only Conexant 
is supported by our HSF modem driver.

Please run the 'hsfconfig -i' command in a root shell and then run the 
'dmesg' command. If your modem is not based on a Conexant chipset, you 
will obtain an error message stating so at the end of the 'dmesg' output.

If this is not the source of the problem, please send at 
support at linuxant.com the output of 'dumpdiag'. Type the following in a
root shell:

---
hsfconfig --dumpdiag
---

Just send us the generated file located in /tmp ('hsfdiag.txt').
It'll help us solve the problem.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com


Julie Sadler wrote:
> hi...history of what is done: on a fresh install fedora core 3 on a dell
> inspiron 8200. (luckily eth0 is up!)
> 
> did scan modem and found:
>  The soft modem Subsystem operates under a controller
>    8086:2486 82801CA/CAM AC97 ICH3
> Also in the data file was this message I thought might be important...
> 
>  The kernel-2.6.9-1.667 was compiled with CONFIG_REGPARM, providing more
> compact and faster code.
> 
>  The kernel was assembled with compiler:  3.4.2
>  a gcc package must be installed to support driver compiling
> 
> Checking for kernel-headers needed for compiling.
>  kernel-headers have base folder /lib/modules/2.6.9-1.667/build
> 
>  Modem symbolic link is:  /dev/modem -> /dev/ttyS1
> 
> 
> Did the kernel .stk16 update....And then did the install. While
> installing i got this error message on the web:
> 
> warning: hsfmodem-7.18.00.03full_k2.6.9_1.667.stk16-1fdr.i686.rpm: V3
> DSA signature: NOKEY, key ID 5dfbf7dc
> Conexant HSF softmodem driver, version 7.18.00.03full
> 
> If you need license keys, assistance or more information, please go to:
>     http://www.linuxant.com/
> 
> When reporting a problem for the first time, please send
> us the file generated by "hsfconfig --dumpdiag".
> 
> Pre-built driver modules that seem compatible with your system were
> found under
> /usr/lib/hsfmodem/modules/binaries/linux-2.6.9-1.667.stk16.
> WARNING: renamed existing /dev/modem to /dev/modem.old:
> 
> lrwxrwxrwx  1 root root 10 Mar 10 15:54 /dev/modem.old -> /dev/ttyS1
> 
> ERROR: no device detected by hsf driver
> error: %post(hsfmodem-7.18.00.03full_k2.6.9_1.667.stk16-1fdr.i686)
> scriptlet failed, exit status 1
> 
> 
> I downloaded the public key...but when i go to install it in terminal i
> get this...
> --import/pubkey unknown option
> 
> i am stuck! Can anyone point me in the right direction?
> thanx!
> J>
> 
> 
> 
> _______________________________________________
> hsflinux mailing list
> hsflinux at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/hsflinux