[hsflinux] hsfconfig complains about CONFIG_SERIAL_CORE

[Linuxant support (Jonathan)]

Hi,

we are aware of this issue with recent 2.4 kernels which do not have the 
CONFIG_SERIAL_CORE option and it will be fixed in the next release of 
the driver. In the meantime, please enter the following commands in a 
root shell to bypass the check for SERIAL_CORE:

---
cd /usr/lib/hsfmodem/modules
make clean minstall
make clean
---

Then, you should now be able to use the 'hsfconfig' command normally 
except to rebuild kernel modules.

Alternatively, there is a patch that you can apply on the generic 
package in the TAR format named 'hsf-7.18.00.05-kernconfig.patch' which 
is available at:

http://www.linuxant.com/drivers/hsf/downloads-patches.php

which should fix this problem.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com



Rod Wright wrote:
> I'm trying to install hsfmodem-7.18.00.05full. The make install goes ok, but 
> hsfconfig complains that CONFIG_SERIAL_CORE is not set. I am running linux 
> 2.4.29 on a Slackware 10.1 system, and I checked the kernel configuration. 
> The 8250/16550 support is enabled. Did a grep -R CONFIG_SERIAL_CORE * in 
> my /usr/src/linux directory, and got results only in arch/arm. I don't see 
> any way to enable this option in i386. Attached is the output of hsfconfig 
> --dumpdiag.
> 
> _______________________________________________
> hsflinux mailing list
> hsflinux at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/hsflinux