[hsflinux] rpm building problem on Modified FC5 kernel

[Parag N(पराग़)]

Hi,
      Thanks a lot for patch. it worked fine on custom FC5 kernel.
Regards,
Parag.

On 5/30/06, Linuxant support (Jonathan) <support at linuxant.com> wrote:
> Hi,
>
> we were able to reproduce the problem you have reported and this is not
> a FC5 specific issue. I have attached an experimental patch to this post
> to solve this issue.
>
> Regards,
>
>
> Jonathan
> Technical specialist / Linuxant
> www.linuxant.com
> support at linuxant.com
>
>
>
> Parag N(पराग़) wrote:
> > Hi,
> >    I have attached the output of 'rpmbuild -ta
> > hsfmodem-7.47.00.01full.tar.gz'. I want to know why am i getting
> > error: Installed (but unpackaged) file(s) found:
> > message.
> > Regards,
> > Parag.
> >
> > On 5/30/06, Linuxant support (Jonathan) <support at linuxant.com> wrote:
> >> Hi,
> >>
> >> using 'rpmbuild -ta' to build a pre-compiled package of DriverLoader is
> >> rarely used as users which have custom compiled kernels generally use
> >> the generic package in the RPM format instead. Since it is not often
> >> used, it is possible that you have hit an unknown issue with that
> >> feature.
> >>
> >> Can you please send at support at linuxant.com the complete output of the
> >> 'rpmbuild -ta hsfmodem-7.47.00.01full.tar.gz' command? We will take a
> >> look at this issue.
> >>
> >> Regards,
> >>
> >>
> >> Jonathan
> >> Technical specialist / Linuxant
> >> www.linuxant.com
> >> support at linuxant.com
> >>
> >>
> >>
> >> Parag N(पराग़) wrote:
> >> > Hi,
> >> >         thanks for link but still interested in why rpmbuild failed.
> >> > It seems you are using different SPEC file/ using some custom macros
> >> > that are not going to work under FC5 right?? If that is the case then
> >> > i suggest you to include that also in tarball package.
> >> >
> >> > Regards,
> >> > Parag.
> >> > On 5/26/06, Linuxant support (Jonathan) <support at linuxant.com> wrote:
> >> >> Hi,
> >> >>
> >> >> instead of rebuilding a RPM package with the TAR package, we recommend
> >> >> that you use the generic package of the driver in the RPM format. This
> >> >> package is able to support custom kernels. That package can be
> >> >> downloaded at:
> >> >>
> >> >> http://www.linuxant.com/drivers/hsf/full/downloads.php
> >> >>
> >> >> Regards,
> >> >>
> >> >>
> >> >> Jonathan
> >> >> Technical specialist / Linuxant
> >> >> www.linuxant.com
> >> >> support at linuxant.com
> >> >>
> >> >>
> >> >>
> >> >> Parag N(पराग़) wrote:
> >> >> > Hi,
> >> >> >     I modified FC5 kernel and now want to have working hsfmodem
> >> >> > driver for that. So i downloaded source and then used
> >> >> >  rpmbuild -ta hsfmodem-7.47.00.01full.tar.gz 1>out 2>err
> >> >> > and got some errors that i am attaching here.
> >> >> >      What changes i need then to build rpm for modified FC5 kernel?
> >> >> > Regards,
> >> >> > Parag.
> >> >> >
> >> >> >
> >> >> >
> >> >>
> >> ------------------------------------------------------------------------
> >> >> >
> >> >> > _______________________________________________
> >> >> > hsflinux mailing list
> >> >> > hsflinux at lists.linuxant.com
> >> >> > https://www.linuxant.com/mailman/listinfo/hsflinux
> >> >>
> >> >
> >> >
> >> ------------------------------------------------------------------------
> >> >
> >> > _______________________________________________
> >> > hsflinux mailing list
> >> > hsflinux at lists.linuxant.com
> >> > https://www.linuxant.com/mailman/listinfo/hsflinux
> >>
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > hsflinux mailing list
> > hsflinux at lists.linuxant.com
> > https://www.linuxant.com/mailman/listinfo/hsflinux
>
>
>