[hsflinux] What parameters files are missing in what directories in HSF mo dem in Linux platform

[Linuxant support (Jonathan)]

Hi,

since the connection seems to have failed very early with the "Training 
failed" error, this could explain why many fields are still at 0 or 
their default values.

Assuming you are trying to connect to another modem, you could try to 
connect to a different modem to see if there is a difference. 
Alternatively, you could also try each of the following init. strings:

---
AT &F W1 +ER=1; +DR=1; +MS=V90,0
AT &F W1 +ER=1; +DR=1; +MS=V90,1
AT &F W1 +ER=1; +DR=1; +MS=V34,0
AT &F W1 +ER=1; +DR=1; +MS=V34,1
AT &F W1 +ER=1; +DR=1; +MS=V32B,0
AT &F W1 +ER=1; +DR=1; +MS=V32B,1
AT &F W1 +ER=1; +DR=1; +MS=V32,0
AT &F W1 +ER=1; +DR=1; +MS=V32,1
---

It is possible that one of them will solve the problem.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com



Kig Chan - McLean wrote:
> I saw this with bunch of zero values in the parameter fields...
> Does anyone know which directories files are required to cause the modem
> driver
> fill configure below "lastcallstatus" field properly ?
> 
> 
> $
> $ ls -ltr
> -r--r--r--    1 root     root            0 Feb  1 14:26 lastcallstatus
> -r--r--r--    1 root     root            0 Feb  1 14:26 hwrevision
> -r--r--r--    1 root     root            0 Feb  1 14:26 hwprofile
> -r--r--r--    1 root     root            0 Feb  1 14:26 hwinst
> $ cat lastcallstatus
> <#UG VERSION=3>
> <DRIVER VERSION=hsfmodem-7.47.00.03oem>
> <CALL SETUP RESULT=Detected Data Answer Tone>
> <MULTIMEDIA MODE=Data Only>
> <DTE-DCE MODE=Async data>
> <V.8 CM="">
> <V.8 JM="">
> <RX SIG PWR DB=0, TX SIG PWR DB=0, S/N RATIO DB=0>
> <RTD=0>
> <TX MOD=Unknown, TX SYMBOL RATE=0, TX CARRIER FREQ=0>
> <RX MOD=Unknown, RX SYMBOL RATE=0, RX CARRIER FREQ=0>
> <TX FIRST RATE=0, RX FIRST RATE=0>
> <CARRIER LOSS=0, RATE RENEG=0>
> <RETRAINS REQ=0, RETRAINS DET=0>
> <TX FINAL RATE=0, RX FINAL RATE=0>
> <PROTOCOL=None>
> <EC FRAME SIZE=0>
> <EC LINK TIMEOUTS=0>
> <EC LINK NAKS=0>
> <COMPRESSION=None>
> <COMPRESSION DICTIONARY SIZE=0>
> <TX FLOW CONTROL=0>
> <RX FLOW CONTROL=0>
> <TX CHARS SENT FROM DTE=0>
> <RX CHARS SENT TO DTE=F>
> <TX CHARS LOST=0>
> <RX CHARS LOST=0>
> <TX FRAME COUNT=0>
> <RX FRAME COUNT=0>
> <TX FRAME ERROR COUNT=0>
> <RX FRAME ERROR COUNT=0>
> <TERMINATION CAUSE=Training failed> ==================?????????????????
> <CALL WAITING EVENT COUNT=0>
> <LSD Vdd=0, Power Bits=0>
> <V8BIS DSP VER=0>
> <RATE RENEG REQ=0, RATE RENEG DET=0>
> <RBS=0, AltRBS=0>
> <DIG PAD DET=0, DIG LOSS EST=0, IMD RATIO=0, SPEED DROP=0>
> <HS CNT=0, Det1=0, Res1=0, LAPM=0>
> <EQM=0, TRAINING EQM=0>
> <HandShake Time=0.0>
> 
> <DIB ERROR COUNTERS=0, 0, 0, 0, 0, 0, 0, 0>
> $
> _______________________________________________
> hsflinux mailing list
> hsflinux at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/hsflinux