[hsflinux] HSF as a fax answers the phone but doesn't beep

[Harvey Coward]

Hi Jonathan,

Whilst I wait for time to dedicate to working out how the AT commands 
are going to help me (by the way, AT &F doesn't work at all).

Could the fact that my modem and video controller both use IRQ11 be the 
problem? And if so, how I can fix it?

In message <4627B25F.1040208 at linuxant.com>, "Linuxant support 
(Jonathan)" <support at linuxant.com> writes
>Hi,
>
>documentation in PDF format is available at the bottom of this page:
>
>http://www.linuxant.com/drivers/hsf/full/downloads.php
>
>This file describes all the supported AT commands as well as their 
>expected return values by the driver.
>
>The new log file shows that there is an attempt to send or receive a 
>FAX but it fails for some reason. You could try with a different FAX 
>software to see if there is a difference. You could also try with the 
>'AT &F' init. string just to make sure it's not the source of the problem.
>
>Regards,
>
>
>Jonathan
>Technical specialist / Linuxant
>www.linuxant.com
>support at linuxant.com
>
>
>
>Harvey Coward wrote:
>> In message <46266484.5060301 at linuxant.com>, "Linuxant support 
>>(Jonathan)" <support at linuxant.com> writes
>>> Hi,
>>>
>>> it seems that the FAX software is able to open the serial device and 
>>>send commands but there is no reply. This is typical if the serial 
>>>device is a physical one on your machine that is connected to nothing.
>>>
>>> In other words, the "/dev/modem" symlink is probably wrong. Either 
>>>fix the symlink or configure your software to use "/dev/ttySHSF0" 
>>>instead of "/dev/modem".
>>>
>> I examined the symlink, it looked OK, then using efax-gtk (different 
>>logging) I tried again (Log is below). It shows the HSF modem being 
>>used, but then for the avoidance of doubt I asked it to use ttySHF0 - 
>>with the same result.
>>
>>> You could also try to use a low-level telecommunication tool like 
>>>minicom. With that, it will be easier to identify the exact source of 
>>>problem as you will be able to manually send 'AT' commands to the 
>>>modem.
>>>
>> Do you know of a web link that will show me what commands I am 
>>supposed  to send and what I am looking for?
>>  ***********************
>> Beginning fax log at 0801 BST 19 Apr 2007
>>  No serial port device specified in efax-gtkrc configuration file
>> Using default of /dev/modem
>>   Socket running on port 9900
>> efax-0.9a: 08:01:45 opened /dev/modem
>> efax-0.9a: 08:01:46 using hsfmodem-7.60.00.02full in class 1
>> efax-0.9a: 08:01:46 waiting for activity
>> efax-0.9a: 08:02:21 activity detected
>> efax-0.9a: 08:02:30 fax call answered
>> efax-0.9a: 08:02:43 Error: timed out after waiting
>> efax-0.9a: 08:02:48 Warning: timed out after waiting
>> efax-0.9a: 08:02:51 Error: timed out after command: +FTH=3
>> efax-0.9a: 08:02:56 Warning: timed out after command: H
>> efax-0.9a: 08:02:30 sent CSI - answering ID
>> efax-0.9a: 08:02:48 received CSI - answering ID
>> efax-0.9a: 08:03:03 sync: dropping DTR
>> efax-0.9a: 08:03:07 sync: sending escapes
>>  *** Stopping send/receive session ***
>>
>###########################################################
>This email has been verified as Virus free
>Virus Protection and more available at http://www.plus.net
>###########################################################

-- 
Best regards
Harvey Coward

Email communications are not secure, for this reason Slough Mortgage Centre Ltd
cannot guarantee the security of the email or its contents or that is remains
virus free once sent.

This email message is strictly confidential and intended solely for the person
or organisation to whom it is addressed.  It may contain privileged and
confidential information and if you are not the intended recipient, you must
not copy, distribute or take any action in reference to it.  If you have
received this email in error, please notify us as soon as possible and delete
the message from your system.

Slough Mortgage Centre is a trading name of Slough Mortgage Centre Ltd,
Registered Office "Willsgrove", 10 The Chimes, Dean Close, High Wycombe, HP12
3HR. Registered in England, number 04460564. Consumer Credit Licence 570377.

Slough Mortgage Centre Ltd is an appointed representative of The Mortgage
Partnership (MK) Limited which is authorised and regulated by the Financial
Services Authority.