<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/1.0.2">
</HEAD>
<BODY>
On Wed, 2002-08-07 at 02:17, Sérgio Monteiro Basto wrote:
<PRE><FONT COLOR="#737373">> Aug 7 02:12:29 darkstar kernel: PCI: Assigned IRQ 4 for device 00:09.0</FONT>
<FONT COLOR="#737373">> Aug 7 02:13:00 darkstar modprobe: modprobe: Can't locate module ppp0</FONT>
<FONT COLOR="#737373">> Aug 7 02:13:00 darkstar modprobe: modprobe: Can't locate module ppp0</FONT>
<FONT COLOR="#737373">> Aug 7 02:13:00 darkstar pppd[1419]: pppd 2.4.1 started by root, uid 0</FONT>
<FONT COLOR="#737373">> Aug 7 02:13:00 darkstar pppd[1419]: Using interface ppp0</FONT>
<FONT COLOR="#737373">> Aug 7 02:13:00 darkstar pppd[1419]: Connect: ppp0 <--> /dev/ttySHSF0</FONT>
<FONT COLOR="#737373">> Aug 7 02:13:07 darkstar kernel: PPP BSD Compression module registered</FONT>
<FONT COLOR="#737373">> Aug 7 02:13:07 darkstar kernel: PPP Deflate Compression module</FONT>
<FONT COLOR="#737373">> registered</FONT>
<FONT COLOR="#737373">> Aug 7 02:13:07 darkstar pppd[1419]: local IP address 213.13.44.16</FONT>
<FONT COLOR="#737373">> Aug 7 02:13:07 darkstar pppd[1419]: remote IP address 194.65.215.26</FONT>
<FONT COLOR="#737373">> Aug 7 02:13:07 darkstar pppd[1419]: primary DNS address 194.65.3.20</FONT>
<FONT COLOR="#737373">> Aug 7 02:13:07 darkstar pppd[1419]: secondary DNS address 194.65.3.21</FONT>
<FONT COLOR="#737373">> Aug 7 02:13:08 darkstar modprobe: modprobe: Can't locate module</FONT>
<FONT COLOR="#737373">> ppp-compress-1</FONT>
<FONT COLOR="#737373">> </FONT>
<FONT COLOR="#737373">> how can </FONT></PRE>
how I can remove this warning ?
<BR>
I remember try
<BR>
put in /etc/modules
<BR>
<BR>
alias ppp-compress-21 bsd_comp
<BR>
alias ppp-compress-24 ppp_deflate
<BR>
alias ppp-compress-26 ppp_deflate
<BR>
<BR>
and I don't know if it right, but inventing a little bit with
<BR>
alias ppp-compress-1 bsd_comp
<BR>
but message disappears.
<BR>
<BR>
and this happens with or without modify etc/modules.conf
<BR>
<BR>
Aug 8 02:39:48 darkstar pppd[3939]: Hangup (SIGHUP)
<BR>
Aug 8 02:39:48 darkstar pppd[3939]: Modem hangup
<BR>
Aug 8 02:39:48 darkstar pppd[3939]: Connection terminated.
<BR>
Aug 8 02:39:48 darkstar pppd[3939]: Connect time 6.1 minutes.
<BR>
Aug 8 02:39:48 darkstar pppd[3939]: Sent 369807 bytes, received 689212 bytes.
<BR>
Aug 8 02:39:48 darkstar pppd[3939]: <U>Couldn't release PPP unit: Invalid argument</U>
<BR>
Aug 8 02:39:48 darkstar modprobe: modprobe: Can't locate module ppp0
<BR>
<BR>
<BR>
especially when i use ftp with binary transfers, http works well.
<BR>
<BR>
I don't know but i think that my ISP change a little bit the connection and begins to appear this strange <FONT COLOR="#737373">modprobe: Can't locate module ppp-compress-1</FONT>
<BR>
<BR>
after this process doesn't die
<BR>
root 3936 1 0 02:33 ? 00:00:00 [cnxthsf_mdmthrd]
<BR>
<BR>
and some hsf modules stay busy
<BR>
<BR>
hsfengine: Device or resource busy
<BR>
hsfosspec: Device or resource busy
<BR>
<BR>
the best tecnic to free all module and can dial again with reboot is
<BR>
rmmod hsfserial that stops terminal until kill process [cnxthsf_mdmthrd]
<BR>
<BR>
<BR>
One compaq pressario 706EA
<BR>
I use redhat 7.3 kernel2.4.18x with acpi patches and latest gcc and glibs from redhat network.
<BR>
<BR>
00:09.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
<BR>
Subsystem: Compaq Computer Corporation: Unknown device 8d89
<BR>
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
<BR>
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
<BR>
Latency: 64
<BR>
Interrupt: pin A routed to IRQ 4
<BR>
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=64K]
<BR>
Region 1: I/O ports at 1858 [size=8]
<BR>
Capabilities: [40] Power Management version 2
<BR>
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
<BR>
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
<BR>
</BODY>
</HTML>