[riptide] Riptide Audio Driver Problem!
David Veksler
capt_david@hotmail.com
Fri, 04 Oct 2002 15:50:46 -0500
Hi,
I am unable to get my Conexant Riptide audio card to work, and I was
wondering if someone on this listserv could help me out.
I downloaded the source for the .4 audio driver and compiled it for my
Mandrake 9 2.4.19 kernel. It installed successfully, and without any
errors, and I can see the mixer, and turn up the mike gain volume till I
hear audio fedback, however when I try to initialize aRts, it fails "unable
to initiallize io" and I lose my mixer- the same thing happens when I try
to run aRts on startup.
I am also unable to play any audio in any of the media players I tried.
Anyone have any ideas? I included the beggining of my dump file, and will
send the whole thing to anyone who wants to take a look.
Also, when I run ripstop I get:
riptidelow: Device or resource busy
re-running ripconfig recomiples and installs without any error however.
Thanks,
--David
+ date
Thu Oct 3 17:53:48 CDT 2002
+ ripconfig --version
0.4mbsibeta02090100
linux-i686(i686)-2.4.19-16mdk-MODVERS Mandrake-9.0
+ uname -a
Linux localhost.localdomain 2.4.19-16mdk #1 Fri Sep 20 18:15:05 CEST 2002
i686 unknown unknown GNU/Linux
+ cat /proc/version
Linux version 2.4.19-16mdk (quintela@bi.mandrakesoft.com) (gcc version 3.2
(Mandrake Linux 9.0 3.2-1mdk)) #1 Fri Sep 20 18:15:05 CEST 2002
+ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 10
cpu MHz : 398.200
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat
pse36 mmx fxsr
bogomips : 794.62
+ lspci -n
00:00.0 Class 0600: 8086:7190 (rev 03)
00:01.0 Class 0604: 8086:7191 (rev 03)
00:03.0 Class 0607: 1217:6872 (rev 05)
00:06.0 Class 0401: 127a:4310
00:06.1 Class 0780: 127a:4311
00:06.2 Class 0980: 127a:4312
00:07.0 Class 0601: 8086:7110 (rev 02)
00:07.1 Class 0101: 8086:7111 (rev 01)
00:07.2 Class 0c03: 8086:7112 (rev 01)
00:07.3 Class 0680: 8086:7113 (rev 03)
01:00.0 Class 0300: 126f:0710 (rev a3)
+ lspci -n -vvv
00:00.0 Class 0600: 8086:7190 (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 Class 0604: 8086:7191 (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fd000000-fdffffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
00:03.0 Class 0607: 1217:6872 (rev 05)
Subsystem: 1217:6872
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 5
Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:06.0 Class 0401: 127a:4310
Subsystem: 127a:4310
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at fc40 [size=64]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:06.1 Class 0780: 127a:4311
Subsystem: 127a:4311
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fedf0000 (32-bit, non-prefetchable) [disabled]
[size=64K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:06.2 Class 0980: 127a:4312
Subsystem: 127a:4312
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at fedef000 (32-bit, non-prefetchable) [disabled]
[size=4K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 Class 0601: 8086:7110 (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 Class 0101: 8086:7111 (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at fcf0 [size=16]
00:07.2 Class 0c03: 8086:7112 (rev 01)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at fcc0 [size=32]
00:07.3 Class 0680: 8086:7113 (rev 03)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
01:00.0 Class 0300: 126f:0710 (rev a3)
Subsystem: 126f:0710
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 9
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+ cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev
3).
Master Capable. Latency=64.
Prefetchable 32 bit memory at 0xf8000000 [0xfbffffff].
Bus 0, device 1, function 0:
PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 3).
Master Capable. Latency=128. Min Gnt=140.
Bus 0, device 3, function 0:
CardBus bridge: O2 Micro, Inc. OZ6812 Cardbus Controller (rev 5).
IRQ 5.
Master Capable. Latency=168. Min Gnt=128.Max Lat=5.
Non-prefetchable 32 bit memory at 0x10000000 [0x10000fff].
Bus 0, device 6, function 0:
Multimedia audio controller: PCI device 127a:4310 (Rockwell
International) (rev 0).
IRQ 5.
Master Capable. Latency=64.
I/O at 0xfc40 [0xfc7f].
Bus 0, device 6, function 1:
Communication controller: Rockwell International Riptide HSF 56k PCI
Modem (rev 0).
IRQ 5.
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xfedf0000 [0xfedfffff].
Bus 0, device 6, function 2:
Input device controller: PCI device 127a:4312 (Rockwell International)
(rev 0).
Non-prefetchable 32 bit memory at 0xfedef000 [0xfedeffff].
Bus 0, device 7, function 0:
ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 2).
Bus 0, device 7, function 1:
IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 1).
Master Capable. Latency=64.
I/O at 0xfcf0 [0xfcff].
Bus 0, device 7, function 2:
USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 1).
IRQ 5.
Master Capable. Latency=64.
I/O at 0xfcc0 [0xfcdf].
Bus 0, device 7, function 3:
Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 3).
IRQ 9.
Bus 1, device 0, function 0:
VGA compatible controller: Silicon Motion, Inc. SM710 LynxEM (rev 163).
IRQ 9.
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xfd000000 [0xfdffffff].
+ cat /proc/cmdline
BOOT_IMAGE=linux ro root=301 devfs=mount quiet
+ cat /proc/uptime
366.64 275.19
+ cat /proc/devices
Character devices:
1 mem
2 pty/m%d
3 pty/s%d
4 tts/%d
5 cua/%d
7 vcs
10 misc
14 sound
29 fb
108 ppp
128 ptm
136 pts/%d
162 raw
180 usb
254 pcmcia
Block devices:
1 ramdisk
2 fd
3 ide0
9 md
22 ide1
+ cat /proc/misc
135 rtc
1 psaux
134 apm_bios
+ cat /proc/filesystems
nodev rootfs
nodev bdev
nodev proc
nodev sockfs
nodev tmpfs
nodev shm
nodev pipefs
ext2
nodev ramfs
nodev devfs
nodev devpts
ext3
nodev usbdevfs
nodev usbfs
nodev supermount
+ cat /proc/interrupts
CPU0
0: 36667 XT-PIC timer
1: 193 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 7 XT-PIC usb-uhci, O2 Micro, Inc. OZ6812 Cardbus
Controller, riptidesound
8: 1 XT-PIC rtc
12: 4170 XT-PIC PS/2 Mouse
14: 17024 XT-PIC ide0
15: 16 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
+ cat /proc/iomem
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-09feffff : System RAM
00100000-0022614c : Kernel code
0022614d-0029547f : Kernel data
09ff0000-09fffbff : ACPI Tables
09fffc00-09ffffff : ACPI Non-volatile Storage
10000000-10000fff : O2 Micro, Inc. OZ6812 Cardbus Controller
10400000-107fffff : PCI CardBus #02
10800000-10bfffff : PCI CardBus #02
a0000000-a0000fff : card services
f8000000-fbffffff : Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
fd000000-fdffffff : PCI Bus #01
fd000000-fdffffff : Silicon Motion, Inc. SM710 LynxEM
fd000000-fd19ffff : vesafb
fedef000-fedeffff : PCI device 127a:4312 (Rockwell International)
fedf0000-fedfffff : Rockwell International Riptide HSF 56k PCI Modem
fffebc00-ffffffff : reserved
+ cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0300-031f : pcnet_cs
0330-0331 : mpu401
0376-0376 : ide1
0388-038b : Yamaha OPL3
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
4000-40ff : PCI CardBus #02
4400-44ff : PCI CardBus #02
fc40-fc7f : PCI device 127a:4310 (Rockwell International)
fc40-fc7f : riptide
fcc0-fcdf : Intel Corp. 82371AB/EB/MB PIIX4 USB
fcc0-fcdf : usb-uhci
fcf0-fcff : Intel Corp. 82371AB/EB/MB PIIX4 IDE
fcf0-fcf7 : ide0
fcf8-fcff : ide1
ff00-ff3f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
ff80-ff9f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
+ cat /proc/dma
4: cascade
+ cat /proc/mtrr
reg00: base=0x00000000 ( 0MB), size= 128MB: write-back, count=1
reg01: base=0x08000000 ( 128MB), size= 32MB: write-back, count=1
reg02: base=0xfd000000 (4048MB), size= 2MB: write-combining, count=1
+ cat /proc/modules
sg 31276 0 (autoclean) (unused)
st 26740 0 (autoclean) (unused)
sr_mod 15096 0 (autoclean) (unused)
sd_mod 11788 0 (autoclean) (unused)
scsi_mod 90372 4 (autoclean) [sg st sr_mod sd_mod]
ide-cd 28712 0 (autoclean)
cdrom 26848 0 (autoclean) [sr_mod ide-cd]
floppy 49340 0 (autoclean)
riptidelow 17948 1
riptidesound 12020 2 [riptidelow]
opl3 12416 0 [riptidelow]
mpu401 19716 0 [riptidelow riptidesound]
sound 55732 0 [opl3 mpu401]
soundcore 3780 0 [riptidesound sound]
riptideint 6312 1 [riptidelow]
nfsd 66576 0 (autoclean)
lockd 46480 0 (autoclean) [nfsd]
sunrpc 60188 0 (autoclean) [nfsd lockd]
pcnet_cs 10880 0
8390 6192 0 [pcnet_cs]
ds 6828 1 [pcnet_cs]
yenta_socket 9728 1
pcmcia_core 42272 0 [pcnet_cs ds yenta_socket]
ppp_async 7456 0 (unused)
ppp_generic 20064 0 [ppp_async]
slhc 5072 0 [ppp_generic]
af_packet 13000 0 (autoclean)
supermount 14340 2 (autoclean)
usb-uhci 21676 0 (unused)
usbcore 58304 1 [usb-uhci]
rtc 6560 0 (autoclean)
ext3 74004 2
jbd 38452 2 [ext3]
+ cat /etc/modules.conf
probeall usb-interface usb-uhci
alias /dev/ttySHSF* hsfserial
alias char-major-240 hsfserial
alias /dev/ttyCUA* hsfserial
alias char-major-241 hsfserial
alias /dev/modem hsfserial
options hsfserial serialmajor=240 calloutmajor=241
alias sound-slot-0 riptidelow
alias /dev/dsp* riptidelow
alias /dev/sound/dsp* riptidelow
alias /dev/mixer* riptidelow
alias /dev/sound/mixer* riptidelow
+ dmesg
Linux version 2.4.19-16mdk (quintela@bi.mandrakesoft.com) (gcc version 3.2
(Mandrake Linux 9.0 3.2-1mdk)) #1 Fri Sep 20 18:15:05 CEST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ebc00 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000009ff0000 (usable)
BIOS-e820: 0000000009ff0000 - 0000000009fffc00 (ACPI data)
BIOS-e820: 0000000009fffc00 - 000000000a000000 (ACPI NVS)
BIOS-e820: 00000000fffebc00 - 0000000100000000 (reserved)
159MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 40944
zone(0): 4096 pages.
zone(1): 36848 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=linux ro root=301 devfs=mount quiet
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Initializing CPU#0
Detected 398.200 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 794.62 BogoMIPS
Memory: 159444k/163776k available (1176k kernel code, 3944k reserved, 444k
data, 136k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU: Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Mendocino) stepping 0a
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd9da, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
vesafb: framebuffer at 0xfd000000, mapped to 0xca800000, size 1664k
vesafb: mode is 800x600x16, linelength=1600, pages=0
vesafb: protected mode interface info at c851:0000
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 30412 bytes).
Console: switching to colour frame buffer device 80x16
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdc:pio, hdd:pio
hda: IBM-DBCA-203240, ATA DISK drive
hdc: SR242S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 6354432 sectors (3253 MB) w/420KiB Cache, CHS=788/128/63, UDMA(33)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 121k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Journalled Block Device driver loaded
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: ide0(3,1): orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 31238
EXT3-fs: ide0(3,1): 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 18:49:04 Sep 20 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Enabling device 00:07.2 (0000 -> 0001)
PCI: Assigned IRQ 5 for device 00:07.2
usb-uhci.c: USB UHCI at I/O 0xfcc0, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
Adding Swap: 253976k swap-space (priority -1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
Linux Kernel Card Services Kernel Version
options: [pci] [cardbus] [pm]
PCI: Assigned IRQ 5 for device 00:03.0
Yenta IRQ list 0c98, PCI irq5
Socket status: 30000411
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
eth0: NE2000 (DL10022 rev 30): io 0x300, irq 3, hw_addr 00:48:54:C0:55:8B
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft
1993-1996
Conexant Sound Driver v0.4mbsibeta02090100 time 23:45:20 Oct 1 2002
<RIPTIDE> Init_module is completed
<RTLOW> version v0.4mbsibeta02090100 time 23:45:09 Oct 1 2002
<RTLOW> Look for 127a 4320 - absent
<RTLOW> Look for 127a 4330 - absent
<RTLOW> Look for 127a 4310PCI: Enabling device 00:06.0 (0000 -> 0001)
PCI: Assigned IRQ 5 for device 00:06.0
PCI: Sharing IRQ 5 with 00:06.1
- found at io fc40 irq 5
<RTLOW> Start allocation of resources: c97a31a0
<RIPTIDE> Register hardware c97a31a0
<RIPTIDE> register is successful
<RTLOW> Resources are allocated: io 0xfc40 irq 5
<RTLOW> Init command interface: fc40 5 cab945c0
<RP_CMDIF> RipTide version before:
ASIC : 3
CODEC : 2
AUXDSP: 3
PROG : 773
<RP_CMDIF> Firmware size: 15597
<RP_CMDIF> Start RiptideLoadImage
<RP_CMDIF> Firmware is loaded.
<RP_CMDIF> RipTide version after:
ASIC : 3
CODEC : 2
AUXDSP: 3
PROG : 773
<RTINT> requesting io ports 0xfc40-0xfc7f
<RTLOW> Init command riptide: fc40 5 cab945c0 c752f320 cab08a90 c752f2f0
<RTLOW> riptide FM at io ports 0x388-0x38b
<RTLOW> Init_module is completed: index = 2
inserting floppy driver for 2.4.19-16mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.00
_________________________________________________________________
Join the world’s largest e-mail service with MSN Hotmail.
http://www.hotmail.com