[driverloader] Netgear WG311v2 and WEP

[Raymond Hewett]

--- "Linuxant Support (Jonathan)"
<support at linuxant.com> wrote: > Hi,
> 
> please make sure that you have selected the right
> security mode. With some 
> configurations, you have to explicitly set
> 'restricted' or 'open' or else it 
> will not work.
> 
> If the security mode is not the problem, please try
> with this Windows XP 
> driver instead :
> 
>
http://www.linuxant.com/driverloader/ndis_drivers/usr11gv40q.zip
> 
> Before you upload the .INF file to the Web
> Configurator, please edit the .INF 
> file and replace the line :
> 
> ---
> %USR11G.DeviceDesc% = USR11G.8400,
> PCI\VEN_104C&DEV_9066&SUBSYS_16EC010D
> ---
> 
> to
> 
> ---
> %USR11G.DeviceDesc% = USR11G.8400,
> PCI\VEN_104C&DEV_9066&SUBSYS_4C001385
> ---
> 
> If you require more assistance, please send at
> support at linuxant.com the output 
> of 'dumpdiag'. Type the following in a root shell:
> 
> ---
> dldrconfig --dumpdiag
> ---
> 
> Just send us the generated file located in /tmp
> ('driverloaderdiag.txt').
> It'll help us solve the problem.
> 
> Regards,
> 
> 
> Jonathan
> Technical specialist / Linuxant
> www.linuxant.com
> support at linuxant.com
> 
> 
> Le 20 Juin 2004 11:48, Raymond Hewett a écrit :
> > It was reported by others some time ago that the
> > Netgear WG311v2 did not work with WEP. I have just
> > tried with diverloader v1.72 and it still does
> not. Is
> >  a fix ever likley to appear?
> >
> > Ray

Thanks for the reply Jonathan. Changing the Security
mode had no discernable effect, however I am delighted
to report that using the usr11gv40q driver I can now
use WEP in both 64 and 128 bit modes.

Thanks very much

Ray