[driverloader] kernel error with asus centrino

[Reinout Smit]

Got it workend with a newer driver from intel
I already knew it was working because i've been using winxp for a few
month's on this laptop.

Only got my wep at a 64 bits 10 hex digits code
What is the best way to add this to my eth1 configuration?

I must admit that this driverloader is working great so far.

Reinout

Op do, 10-02-2005 te 11:43 -0500, schreef Linuxant support (Jonathan):
> Hi,
> 
> this is strange, it seems that the Windows XP driver detected an invalid 
> value from the hardware and at the end of the dump, you are unable to 
> send or receive packets with the wireless interface.
> 
> Please try with different versions of the Windows XP driver to see if 
> there is a difference. You could also try to use this wireless card 
> under Windows XP just to make sure that this is not a hardware related 
> issue.
> 
> Regards,
> 
> 
> Jonathan
> Technical specialist / Linuxant
> www.linuxant.com
> support at linuxant.com
> 
> 
> Reinout Smit wrote:
> > Hi,
> > 
> > trying to use driverloader on a ASUS M6727NE centrino with a intel
> > 2200BG on Fedora Core 3 with kernel 2.6.10-1.760_FC3.stk16
> > Can't get it to work,
> > underneath is a part of the dmesg output
> > 
> > usbcore: deregistering driver driverloader
> > divert: freeing divert_blk for eth1
> > driverloader: stack=16384/64/0 REGPARM
> > usbcore: registered new driver driverloader
> > driverloader: w22n51.sys: 0xe0c1c000..0xe0dae080 entry = e0c1c300 (pbase = 0x10000)
> > ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 4 (level, low) -> IRQ 4
> > divert: allocating divert_blk for eth1
> > eth1: New link status: Disconnected (0002)
> > eth1: WPA, TKIP, WEP128, WEP64 supported
> > eth1: Intel(R) PRO/Wireless 2200 LAN Card Driver at 0000:02:02.0 (MAC address 00:0E:35:82:E0:20) ready
> > eth1: New link status: Connected (0001)
> > usbcore: deregistering driver driverloader
> > divert: freeing divert_blk for eth1
> > driverloader: stack=16384/64/0 REGPARM
> > usbcore: registered new driver driverloader
> > driverloader: w22n51.sys: 0xe0c1c000..0xe0dae080 entry = e0c1c300 (pbase = 0x10000)
> > ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 4 (level, low) -> IRQ 4
> > divert: allocating divert_blk for eth1
> > eth1: New link status: Disconnected (0002)
> > driverloader: NdisWriteErrorLogEntry: ErrorCode=0xc00013a7 NumberOfErrorValues=2
> > driverloader: NdisWriteErrorLogEntry: ErrorValue 0=0x4e4f4c41
> > driverloader: NdisWriteErrorLogEntry: ErrorValue 1=0x00000338
> > driverloader: NdisWriteErrorLogEntry: ErrorCode=INVALID_VALUE_FROM_ADAPTER NumberOfErrorValues=2
> > driverloader: NdisWriteErrorLogEntry: ErrorValue 0=0x4e4f4c41
> > driverloader: NdisWriteErrorLogEntry: ErrorValue 1=0x00000001
> > eth1: WPA, TKIP, WEP128, WEP64 supported
> > eth1: Intel(R) PRO/Wireless 2200 LAN Card Driver at 0000:02:02.0 (MAC address 00:0E:35:82:E0:20) ready
> > eth1: New link status: Connected (0001)
> > eth1: no IPv6 routers present
> > usbcore: deregistering driver driverloader
> > divert: freeing divert_blk for eth1
> > driverloader: stack=16384/64/0 REGPARM
> > usbcore: registered new driver driverloader
> > driverloader: w22n51.sys: 0xe0c1c000..0xe0dae080 entry = e0c1c300 (pbase = 0x10000)
> > ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 4 (level, low) -> IRQ 4
> > divert: allocating divert_blk for eth1
> > eth1: New link status: Disconnected (0002)
> > eth1: WPA, TKIP, WEP128, WEP64 supported
> > eth1: Intel(R) PRO/Wireless 2200 LAN Card Driver at 0000:02:02.0 (MAC address 00:0E:35:82:E0:20) ready
> > driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
> > driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
> > driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
> > driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
> > driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
> > eth1: no IPv6 routers present
> > driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
> > driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
> > driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
> > driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
> > driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
> > driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
> > 
> > _______________________________________________
> > driverloader mailing list
> > driverloader at lists.linuxant.com
> > https://www.linuxant.com/mailman/listinfo/driverloader
> _______________________________________________
> driverloader mailing list
> driverloader at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/driverloader
> 
>