[driverloader] kernel error with asus centrino

[Linuxant support (Jonathan)]

Hi,

you should use the network configuration tool of your Linux distribution 
to setup your WEP key. For Fedora Core, this tool can be started with 
the 'neat' command in a shell. This tool can also be launched from the 
system menu.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com


Reinout Smit wrote:
> Got it workend with a newer driver from intel
> I already knew it was working because i've been using winxp for a few
> month's on this laptop.
> 
> Only got my wep at a 64 bits 10 hex digits code
> What is the best way to add this to my eth1 configuration?
> 
> I must admit that this driverloader is working great so far.
> 
> Reinout
> 
> Op do, 10-02-2005 te 11:43 -0500, schreef Linuxant support (Jonathan):
> 
>>Hi,
>>
>>this is strange, it seems that the Windows XP driver detected an invalid 
>>value from the hardware and at the end of the dump, you are unable to 
>>send or receive packets with the wireless interface.
>>
>>Please try with different versions of the Windows XP driver to see if 
>>there is a difference. You could also try to use this wireless card 
>>under Windows XP just to make sure that this is not a hardware related 
>>issue.
>>
>>Regards,
>>
>>
>>Jonathan
>>Technical specialist / Linuxant
>>www.linuxant.com
>>support at linuxant.com
>>
>>
>>Reinout Smit wrote:
>>
>>>Hi,
>>>
>>>trying to use driverloader on a ASUS M6727NE centrino with a intel
>>>2200BG on Fedora Core 3 with kernel 2.6.10-1.760_FC3.stk16
>>>Can't get it to work,
>>>underneath is a part of the dmesg output
>>>
>>>usbcore: deregistering driver driverloader
>>>divert: freeing divert_blk for eth1
>>>driverloader: stack=16384/64/0 REGPARM
>>>usbcore: registered new driver driverloader
>>>driverloader: w22n51.sys: 0xe0c1c000..0xe0dae080 entry = e0c1c300 (pbase = 0x10000)
>>>ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 4 (level, low) -> IRQ 4
>>>divert: allocating divert_blk for eth1
>>>eth1: New link status: Disconnected (0002)
>>>eth1: WPA, TKIP, WEP128, WEP64 supported
>>>eth1: Intel(R) PRO/Wireless 2200 LAN Card Driver at 0000:02:02.0 (MAC address 00:0E:35:82:E0:20) ready
>>>eth1: New link status: Connected (0001)
>>>usbcore: deregistering driver driverloader
>>>divert: freeing divert_blk for eth1
>>>driverloader: stack=16384/64/0 REGPARM
>>>usbcore: registered new driver driverloader
>>>driverloader: w22n51.sys: 0xe0c1c000..0xe0dae080 entry = e0c1c300 (pbase = 0x10000)
>>>ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 4 (level, low) -> IRQ 4
>>>divert: allocating divert_blk for eth1
>>>eth1: New link status: Disconnected (0002)
>>>driverloader: NdisWriteErrorLogEntry: ErrorCode=0xc00013a7 NumberOfErrorValues=2
>>>driverloader: NdisWriteErrorLogEntry: ErrorValue 0=0x4e4f4c41
>>>driverloader: NdisWriteErrorLogEntry: ErrorValue 1=0x00000338
>>>driverloader: NdisWriteErrorLogEntry: ErrorCode=INVALID_VALUE_FROM_ADAPTER NumberOfErrorValues=2
>>>driverloader: NdisWriteErrorLogEntry: ErrorValue 0=0x4e4f4c41
>>>driverloader: NdisWriteErrorLogEntry: ErrorValue 1=0x00000001
>>>eth1: WPA, TKIP, WEP128, WEP64 supported
>>>eth1: Intel(R) PRO/Wireless 2200 LAN Card Driver at 0000:02:02.0 (MAC address 00:0E:35:82:E0:20) ready
>>>eth1: New link status: Connected (0001)
>>>eth1: no IPv6 routers present
>>>usbcore: deregistering driver driverloader
>>>divert: freeing divert_blk for eth1
>>>driverloader: stack=16384/64/0 REGPARM
>>>usbcore: registered new driver driverloader
>>>driverloader: w22n51.sys: 0xe0c1c000..0xe0dae080 entry = e0c1c300 (pbase = 0x10000)
>>>ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 4 (level, low) -> IRQ 4
>>>divert: allocating divert_blk for eth1
>>>eth1: New link status: Disconnected (0002)
>>>eth1: WPA, TKIP, WEP128, WEP64 supported
>>>eth1: Intel(R) PRO/Wireless 2200 LAN Card Driver at 0000:02:02.0 (MAC address 00:0E:35:82:E0:20) ready
>>>driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
>>>driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
>>>driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
>>>driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
>>>driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
>>>eth1: no IPv6 routers present
>>>driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
>>>driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
>>>driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
>>>driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
>>>driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
>>>driverloader: ndisWrapCheckForHangTimerFunc_stk: PCI-0000:02:02.0-8086:4220-8086:2701 hung
>>>
>>>_______________________________________________
>>>driverloader mailing list
>>>driverloader at lists.linuxant.com
>>>https://www.linuxant.com/mailman/listinfo/driverloader
>>
>>_______________________________________________
>>driverloader mailing list
>>driverloader at lists.linuxant.com
>>https://www.linuxant.com/mailman/listinfo/driverloader
>>
>>
> 
> 
> _______________________________________________
> driverloader mailing list
> driverloader at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/driverloader