[hcflinux] Diamond PCI Supra on Suse 8.1: Hangup (SIGHUP)

[Kevin Ross]

Looks like the modem is working fine, it looks like it could be a pppd
config issue.  If you could add the "debug" option, and try again, and post
the log file, preferably copied directly from the syslog, rather than typed
in manually, complete with timestamps, etc, that would be ideal.

Thanks!
-- Kevin

----- Original Message -----
From: "José A. de la Torre M" <josedelatorre at softhome.net>
To: <hcflinux at lists.mbsi.ca>
Sent: Friday, January 24, 2003 10:04 AM
Subject: [hcflinux] Diamond PCI Supra on Suse 8.1: Hangup (SIGHUP)


> Hi!
>
> I tried the hcf modem driver for conexant
> for suse 8.1 in ther file:
>
> hcfpcimodem-0.99mbsibeta02123100k.2.4.19_4Gb-1suse.i386.rpm
>
> with no results, do someone else solve the problem?
>
> My PCI modem is a Supra 2560 PCI Modem Enumerator
> Rockwell Semiconductor Systems (Also Conexant) RC56HCFPCI HCF 56k V90
Modem
>
>
> Regards.
>
> log file shows the following message:
>
> ATZ
> pppd: ATZ
> pppd: OK
> pppd: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> pppd: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> pppd: OK
> pppd: --> Sending: ATM1
> pppd: ATM1
> pppd: OK
> pppd: --> Modem initialized.
> pppd: --> Sending: ATDT909400400
> pppd: --> Waiting for carrier.
> pppd: ATDT909400400
> pppd: CONNECT 57600
> pppd: --> Carrier detected.  Waiting for prompt.
> pppd: --> Don't know what to do!  Starting pppd and hoping for the best.
> pppd: Serial connection established.
> pppd: Using interface ppp0
> pppd: Connect: ppp0 <--> /dev/modem
> pppd: Hangup (SIGHUP)
> pppd: Modem hangup
> pppd: Connection terminated.
> pppd died: A modem hung up the phone (exit code 16)
>
> José Alejandro.
>
>
>
>
>
> _______________________________________________
> hcflinux mailing list
> hcflinux at lists.mbsi.ca
> http://www.mbsi.ca/mailman/listinfo/hcflinux
>