[hcflinux] Diamond PCI Supra on Suse 8.1: Hangup (SIGHUP)

Mon Feb 24 20:50:35 EST 2003

I go on with problems in the init string, anyone has solved this problem 
before?

ISP supportline sais: "If the drivers is alright you needn't worry about 
init string" what do you think about it?

Regards, Jose.

Kevin Ross wrote:

>Add the word "debug" to the /etc/ppp/options file, or to the particular file
>under /etc/ppp/peers that you're using.  Then repost the output of the log
>file.
>
>Thanks!
>-- Kevin
>
>----- Original Message -----
>From: "José A. de la Torre M" <josedelatorre at softhome.net>
>To: "Kevin Ross" <Kevin at familyross.net>
>Sent: Sunday, January 26, 2003 10:57 AM
>Subject: Re: [hcflinux] Diamond PCI Supra on Suse 8.1: Hangup (SIGHUP)
>
>
>>I don't know how to add debug option, attache you the log file complete
>>(Log Kinternet), I tried to connect using the init string from log file
>>in Win98 (file init string INF log) with the same result. ISP support
>>showed me to connect only with ATZ as init string with no result again,
>>what can be happening?
>>
>>Thanks Kevin.
>>
>>
>>Kevin Ross wrote:
>>
>>>Looks like the modem is working fine, it looks like it could be a pppd
>>>config issue.  If you could add the "debug" option, and try again, and
>>>
>post
>
>>>the log file, preferably copied directly from the syslog, rather than
>>>
>typed
>
>>>in manually, complete with timestamps, etc, that would be ideal.
>>>
>>>Thanks!
>>>-- Kevin
>>>
>>>----- Original Message -----
>>>From: "José A. de la Torre M" <josedelatorre at softhome.net>
>>>To: <hcflinux at lists.mbsi.ca>
>>>Sent: Friday, January 24, 2003 10:04 AM
>>>Subject: [hcflinux] Diamond PCI Supra on Suse 8.1: Hangup (SIGHUP)
>>>
>>>
>>>>Hi!
>>>>
>>>>I tried the hcf modem driver for conexant
>>>>for suse 8.1 in ther file:
>>>>
>>>>hcfpcimodem-0.99mbsibeta02123100k.2.4.19_4Gb-1suse.i386.rpm
>>>>
>>>>with no results, do someone else solve the problem?
>>>>
>>>>My PCI modem is a Supra 2560 PCI Modem Enumerator
>>>>Rockwell Semiconductor Systems (Also Conexant) RC56HCFPCI HCF 56k V90
>>>>
>>>Modem
>>>
>>>>Regards.
>>>>
>>>>log file shows the following message:
>>>>
>>>>ATZ
>>>>pppd: ATZ
>>>>pppd: OK
>>>>pppd: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>>>pppd: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>>>pppd: OK
>>>>pppd: --> Sending: ATM1
>>>>pppd: ATM1
>>>>pppd: OK
>>>>pppd: --> Modem initialized.
>>>>pppd: --> Sending: ATDT909400400
>>>>pppd: --> Waiting for carrier.
>>>>pppd: ATDT909400400
>>>>pppd: CONNECT 57600
>>>>pppd: --> Carrier detected.  Waiting for prompt.
>>>>pppd: --> Don't know what to do!  Starting pppd and hoping for the best.
>>>>pppd: Serial connection established.
>>>>pppd: Using interface ppp0
>>>>pppd: Connect: ppp0 <--> /dev/modem
>>>>pppd: Hangup (SIGHUP)
>>>>pppd: Modem hangup
>>>>pppd: Connection terminated.
>>>>pppd died: A modem hung up the phone (exit code 16)
>>>>
>>>>José Alejandro.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>_______________________________________________
>>>>hcflinux mailing list
>>>>hcflinux at lists.mbsi.ca
>>>>http://www.mbsi.ca/mailman/listinfo/hcflinux
>>>>
>>>_______________________________________________
>>>hcflinux mailing list
>>>hcflinux at lists.mbsi.ca
>>>http://www.mbsi.ca/mailman/listinfo/hcflinux
>>>
>>
>
>
>----------------------------------------------------------------------------
>----
>
>
>>SuSE Meta pppd (smpppd), Version 0.78 on linux.
>>wwwoffle not is running
>>Selection of interface/provider "ppp0"/"Wanadoo" succeeded.
>>Reloading configuration.
>>Reloading interfaces and providers.
>>Selection of interface/provider "ppp0"/"Wanadoo" succeeded.
>>Selection of new interface/provider "ppp1"/"Wanadoo (2)" succeeded.
>>Starting connection. (2003-01-26 19:19:54 CET)
>>pppd: Plugin passwordfd.so loaded.
>>pppd: Using interface ppp0
>>pppd: local  IP address 192.168.99.1
>>pppd: remote IP address 192.168.99.99
>>Stopping connection. (2003-01-26 19:20:05 CET)
>>pppd: Terminating on signal 15.
>>pppd died: pppd received a signal (exit code 5)
>>Selection of new interface/provider "ppp0"/"Wanadoo (1) (1)" succeeded.
>>Starting connection. (2003-01-26 19:20:13 CET)
>>pppd: Plugin passwordfd.so loaded.
>>pppd: Using interface ppp0
>>pppd: local  IP address 192.168.99.1
>>pppd: remote IP address 192.168.99.99
>>Stopping connection. (2003-01-26 19:20:17 CET)
>>pppd: Terminating on signal 15.
>>pppd died: pppd received a signal (exit code 5)
>>Selection of new provider "Wanadoo" succeeded.
>>Selection of new interface/provider "ppp1"/"Wanadoo (2)" succeeded.
>>Selection of new provider "Wanadoo" succeeded.
>>Starting connection. (2003-01-26 19:20:31 CET)
>>pppd: Plugin passwordfd.so loaded.
>>pppd: --> WvDial: Internet dialer version 1.42
>>pppd: --> Initializing modem.
>>pppd: --> Sending: ATZ
>>pppd: ATZ
>>pppd: OK
>>pppd: --> Sending: ATM1
>>pppd: ATM1
>>pppd: OK
>>pppd: --> Modem initialized.
>>pppd: --> Sending: ATDT909400400
>>pppd: --> Waiting for carrier.
>>pppd: ATDT909400400
>>pppd: CONNECT 57600
>>pppd: --> Carrier detected.  Waiting for prompt.
>>pppd: --> Don't know what to do!  Starting pppd and hoping for the best.
>>pppd: Serial connection established.
>>pppd: Using interface ppp0
>>pppd: Connect: ppp0 <--> /dev/modem
>>pppd: Hangup (SIGHUP)
>>pppd: Modem hangup
>>pppd: Connection terminated.
>>pppd died: A modem hung up the phone (exit code 16)
>>
>
>
>----------------------------------------------------------------------------
>----
>
>
>>SuSE Meta pppd (smpppd), Version 0.78 on linux.
>>wwwoffle not is running
>>Selection of interface/provider "ppp0"/"Wanadoo" succeeded.
>>Reloading configuration.
>>Reloading interfaces and providers.
>>Selection of interface/provider "ppp0"/"Wanadoo" succeeded.
>>Selection of new interface/provider "ppp1"/"Wanadoo (2)" succeeded.
>>Starting connection. (2003-01-26 19:19:54 CET)
>>pppd: Plugin passwordfd.so loaded.
>>pppd: Using interface ppp0
>>pppd: local  IP address 192.168.99.1
>>pppd: remote IP address 192.168.99.99
>>Stopping connection. (2003-01-26 19:20:05 CET)
>>pppd: Terminating on signal 15.
>>pppd died: pppd received a signal (exit code 5)
>>Selection of new interface/provider "ppp0"/"Wanadoo (1) (1)" succeeded.
>>Starting connection. (2003-01-26 19:20:13 CET)
>>pppd: Plugin passwordfd.so loaded.
>>pppd: Using interface ppp0
>>pppd: local  IP address 192.168.99.1
>>pppd: remote IP address 192.168.99.99
>>Stopping connection. (2003-01-26 19:20:17 CET)
>>pppd: Terminating on signal 15.
>>pppd died: pppd received a signal (exit code 5)
>>Selection of new provider "Wanadoo" succeeded.
>>Selection of new interface/provider "ppp1"/"Wanadoo (2)" succeeded.
>>Selection of new provider "Wanadoo" succeeded.
>>Starting connection. (2003-01-26 19:20:31 CET)
>>pppd: Plugin passwordfd.so loaded.
>>pppd: --> WvDial: Internet dialer version 1.42
>>pppd: --> Initializing modem.
>>pppd: --> Sending: ATZ
>>pppd: ATZ
>>pppd: OK
>>pppd: --> Sending: ATM1
>>pppd: ATM1
>>pppd: OK
>>pppd: --> Modem initialized.
>>pppd: --> Sending: ATDT909400400
>>pppd: --> Waiting for carrier.
>>pppd: ATDT909400400
>>pppd: CONNECT 57600
>>pppd: --> Carrier detected.  Waiting for prompt.
>>pppd: --> Don't know what to do!  Starting pppd and hoping for the best.
>>pppd: Serial connection established.
>>pppd: Using interface ppp0
>>pppd: Connect: ppp0 <--> /dev/modem
>>pppd: Hangup (SIGHUP)
>>pppd: Modem hangup
>>pppd: Connection terminated.
>>pppd died: A modem hung up the phone (exit code 16)
>>Reloading configuration.
>>Reloading interfaces and providers.
>>Selection of interface/provider "ppp0"/"Wanadoo" succeeded.
>>Starting connection. (2003-01-26 19:27:51 CET)
>>pppd: Plugin passwordfd.so loaded.
>>pppd: --> WvDial: Internet dialer version 1.42
>>pppd: --> Initializing modem.
>>pppd: --> Sending: AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1
>>pppd: AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1
>>pppd: OK
>>pppd: --> Sending: ATS7=60M1+ES=3,0,2;+DS=3;+IFC=2,2;
>>pppd: OK
>>pppd: --> Sending: ATM1
>>pppd: OK
>>pppd: --> Modem initialized.
>>pppd: --> Sending: ATDT909400400
>>pppd: --> Waiting for carrier.
>>pppd: +MCR: V90
>>pppd: +MRR: 49333
>>pppd: +ER: LAPM
>>pppd: +DR: V42B
>>pppd: CONNECT 115200
>>pppd: --> Carrier detected.  Waiting for prompt.
>>pppd: --> Don't know what to do!  Starting pppd and hoping for the best.
>>pppd: Serial connection established.
>>pppd: Using interface ppp0
>>pppd: Connect: ppp0 <--> /dev/modem
>>pppd: Hangup (SIGHUP)
>>pppd: Modem hangup
>>pppd: Connection terminated.
>>pppd died: A modem hung up the phone (exit code 16)
>>
>
>