[hcflinux] about appache modem and drivers

[kamilcoskun at sent.com]

I have done everything you said,I'm sending you the results,please tell
me why doesn't my modem respond

I installed hcfpci driver by for my appache modem(vendor:141A device:1035
, subvendor:141A subdevice:1035) and configured like this:

[root at localhost root]# hcfpciconfig
Linux HCF controllerless modem drivers, version 0.99lnxtbeta03041600
 
WARNING: this is an EXPERIMENTAL BETA VERSION of the HCF drivers for
Linux.
USE AT YOUR OWN RISK! See the file /usr/lib/hcfpci/LICENSE for details.
 
Conexant Systems neither distributes nor maintains this package.
PLEASE DO NOT CONTACT CONEXANT REGARDING THIS SOFTWARE!!!
If you require assistance or need more information, go to:
http://www.linuxant.com/drivers
 
Should we attempt to automatically configure your hardware? [yes]
 
No supported modem device found.
Is the modem presently installed in your system? [yes]
 
1) PCI device 141a:1035 (Apache Micro Peripherals Inc) (rev 8).
2) None of the above
 
Which PCI device is your HCF modem? (1-2) 1
 
1) /etc/hcfpci/inf/hcfv90_lan_linux.inf
2) /etc/hcfpci/inf/hcfv90_linux.inf
3) /etc/hcfpci/inf/hcfv92_linux.inf
4) /etc/hcfpci/inf/hcfv92_riptide_linux.inf
5) None of the above
 
Which INF file would you like to use with your HCF modem? (1-5) 2
 
Selected PCI VendorID=141A DeviceID=1035
and INF file /etc/hcfpci/inf/hcfv90_linux.inf
 
Supported countries:
 
ARGENTINA, AUSTRALIA, AUSTRIA, BELGIUM,
BRAZIL, BULGARIA, CANADA, CHILE, CHINA,
CROATIA, CZECH_REPUBLIC, DENMARK, FINLAND, FRANCE,
GERMANY, GREECE, HONG-KONG, HUNGARY, ICELAND,
INDIA, INDONESIA, IRELAND, ISRAEL, ITALY,
JAPAN, KOREA, LUXEMBOURG, MALAYSIA, MEXICO,
NETHERLANDS, NEW_ZEALAND, NORWAY, PHILIPPINES, POLAND,
PORTUGAL, RUSSIA, SINGAPORE, SLOVAKIA, SLOVENIA,
SOUTH_AFRICA, SPAIN, SWEDEN, SWITZERLAND, TAIWAN,
THAILAND, TURKEY, UK, UNITED_ARAB_EMIRATES, USA
 
Please enter your country name [TURKEY]: turkey
 
Configuring modem for country: "TURKEY"
You can change this setting later with the command "hcfpciconfig
--country"
 
Pre-built HCF modules that seem compatible with your system were found
under
/usr/lib/hcfpci/modules/binaries/i686/mdk/linux-2.4.19-16mdk.
Would you like to use them? [yes]
 
Your HCF modem should now be accessible as /dev/ttySHCF0
After this I have done this:
root at localhost root]# modprobe hcfpciserial
Warning: loading
/usr/lib/hcfpci/modules/binaries/i586/mdk/linux-2.4.19-16mdk/hcfpciosspec.o
will taint the kernel: non-GPL license - Copyright (C) 1996-2002 Conexant
Systems Inc. All Rights Reserved.
See http://www.tux.org/lkml/#export-tainted for information about tainted
modules
Module hcfpciosspec loaded, with warnings
Warning: loading
/usr/lib/hcfpci/modules/binaries/i586/mdk/linux-2.4.19-16mdk/hcfpciengine.o
will taint the kernel: non-GPL license - Copyright (C) 1996-2002 Conexant
Systems Inc. All Rights Reserved.
See http://www.tux.org/lkml/#export-tainted for information about tainted
modules
Module hcfpciengine loaded, with warnings
After that I gave "dmesg" command,and this is the result:
root at localhost root]# dmesg
Linux version 2.4.19-16mdk (quintela at bi.mandrakesoft.com) (gcc version
3.2 (Mandrake Linux 9.0 3.2-1mdk)) #1 Fri Sep 20 18:15:05 CEST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
128MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 32768
zone(0): 4096 pages.
zone(1): 28672 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=305 devfs=mount quiet
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 501.145 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 999.42 BogoMIPS
Memory: 127100k/131072k available (1176k kernel code, 3584k reserved,
444k data, 136k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
CPU: Common caps: 0183fbff 00000000 00000000 00000000
CPU: Intel Celeron (Mendocino) stepping 05
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 501.1550 MHz.
..... host bus clock speed is 66.8206 MHz.
cpu: 0, clocks: 668206, slice: 334103
CPU0<T0:668192,T1:334080,D:9,S:334103,C:668206>
mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb1c0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v1.12a (20020514) Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x1
vesafb: framebuffer at 0xd6000000, mapped to 0xc8800000, size 4096k
vesafb: mode is 800x600x16, linelength=1600, pages=3
vesafb: protected mode interface info at c000:02e5
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 30412 bytes).
Console: switching to colour frame buffer device 80x16
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD75AA, ATA DISK drive
hdb: ATAPI 48X CDROM, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 14726880 sectors (7540 MB) w/2048KiB Cache, CHS=916/255/63, UDMA(33)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 120k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 18:49:04 Sep 20 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 10 for device 00:07.2
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,5), internal journal
Adding Swap: 216836k swap-space (priority -1)
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
es1371: version v0.30 time 18:46:14 Sep 20 2002
PCI: Found IRQ 9 for device 00:13.0
es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x08
es1371: found es1371 rev 8 at io 0xe800 irq 9
es1371: features: joystick 0x0
ac97_codec: AC97 Audio codec, id: 0x4352:0x5913 (Cirrus Logic CS4297A rev
A)
udf: registering filesystem
inserting floppy driver for 2.4.19-16mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
end_request: I/O error, dev 02:00 (floppy), sector 0
PCI: Found IRQ 11 for device 00:0e.0
HCF ASIC ID: 85
HCF DATAPUMP PART: '74' REV: 'BA'
After that I wrote "lsmod"
[root at localhost root]# lsmod
Module Size Used by Tainted: P
hcfpciserial 22552 0 (unused)
hcfpciengine 890832 0 [hcfpciserial]
hcfpciosspec 15084 1 [hcfpciserial hcfpciengine]
msdos 5364 0 (autoclean)
isofs 25652 0 (autoclean)
inflate_fs 17892 0 (autoclean) [isofs]
floppy 49340 0 (autoclean)
udf 85472 0 (autoclean)
es1371 26568 0
soundcore 3780 0 [es1371]
ac97_codec 9928 0 [es1371]
gameport 1660 0 [es1371]
ppp_async 7456 0 (unused)
ppp_generic 20064 0 [ppp_async]
slhc 5072 0 [ppp_generic]
af_packet 13000 0 (autoclean)
nls_iso8859-1 2844 1 (autoclean)
nls_cp850 3580 1 (autoclean)
vfat 9588 1 (autoclean)
fat 31864 0 (autoclean) [msdos vfat]
supermount 14340 2 (autoclean)
usb-uhci 21676 0 (unused)
usbcore 58304 1 [usb-uhci]
rtc 6560 0 (autoclean)
ext3 74004 1
jbd 38452 1 [ext3]
when I open kppp and query the modem,it doesn't respond
I can see "ttySHCF0" in "/dev" but not in kppp window,what does this
mean?
When I write /dev/ttySHCF0 in the konsole terminal it says "permission
denied"
-- 
  
  kamilcoskun at sent.com

-- 
http://www.fastmail.fm - Same, same, but different…